Bitte einen Suchbegriff eingeben - Wprowadź wyszukiwane hasło
Kategoria:
    Producent:
      maszyny:
        Handlowiec:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe ZMM C 11 MC


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1858 · Center Lathe

          ZMM - C 11 MC - - 2024 -

          Technical details
          neu20241682prompt, Zwischenverkauf vBulgarien43490 €︱ 882.85 €︱ 1600 mm︱ 2000 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 890 M︱ 2120 - 2000 1/min︱ 1200.04 - 12 mm/U︱
          driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 40 .820,- turning length 1.500 mm € 41.800,- turning length 3.000 mm € 47.640,- turning length 4.000 mm € 52.630,- turning length 5.000 mm € 66.400,-
            neu
            2024
            1682
            prompt, Zwischenverkauf v
            Bulgarien
            43490 €
            882.85 €
            1
            600 mm
            2000 mm
            300 mm
            80 mm
            400 mm
            400 mm
            8
            90 M
            21
            20 - 2000 1/min
            120
            0.04 - 12 mm/U
            Description :
            driven by conventional gearbox
            3-axes digital readout Fagor 40i
            quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round)
            3-jaw chuck Bison3204/DIN6350, Ø 250 mm
            spindle dead center
            four way rapid traverse device
            electromagnetic brake
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 1.000 mm
            € 40 .820,-

            turning length 1.500 mm
            € 41.800,-

            turning length 3.000 mm
            € 47.640,-

            turning length 4.000 mm
            € 52.630,-

            turning length 5.000 mm
            € 66.400,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 325


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-909 · Center Lathe

          ZMM - CU 325 - - 2023 -

          Technical details
          neu20231675prompt, Zwischenverkauf vBulgarien21070 €︱ 431.94 €︱ 1325 mm︱ 1000 mm︱ 165 mm︱ 32 mm︱ 190 mm︱ 200 mm︱ 54,5 M︱ 1285 - 2.000 1/min︱ 480.006 - 1.77 mm/U︱
          driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" incl. following optional equipment: 1 lenght stop FURTHER TURNING LENGTHS ON REQUEST
            neu
            2023
            1675
            prompt, Zwischenverkauf v
            Bulgarien
            21070 €
            431.94 €
            1
            325 mm
            1000 mm
            165 mm
            32 mm
            190 mm
            200 mm
            5
            4,5 M
            12
            85 - 2.000 1/min
            48
            0.006 - 1.77 mm/U
            Description :
            driven by manual transmission
            3-axes digital readout Fagor 40i
            quick change toolpostAmestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 160 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            incl. following optional equipment:
            1 lenght stop

            FURTHER TURNING LENGTHS ON REQUEST


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 1000 x 3000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011426 · Center Lathe

          ZMM - CU 1000 x 3000 - - 2023 -

          Technical details
          turning diameter over bed 1090 mm︱turning diameter over slide rest 690 mm︱turning length 3000 (1500 bis 6000) mm︱spindle bore 155 mm︱turning dia. in gap 1250 mm︱spindle turning speed range 5 - 1000 U/min︱thread 80 Stufen︱metric threading 0,5 - 480 ︱thread - module 0,125 - 120 mm︱thread - inch 60 - 1 1/16 inch.︱Whitworth-thread 240 - 1/4 TPI︱bed width 700 mm︱spindle cone Gr. 15 ︱number of feeds 160 ︱longitudinal feeds: 0,032 - 38,9 mm/U︱face feeds 0,016 - 19,45 mm︱face slide travel 525 mm︱upper slide-adjustment 270 mm︱diameter of quill 125 mm︱ MK 6
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 1090 mm
            turning diameter over slide rest 690 mm
            turning length 3000 (1500 bis 6000) mm
            spindle bore 155 mm
            turning dia. in gap 1250 mm
            spindle turning speed range 5 - 1000 U/min
            thread 80 Stufen
            metric threading 0,5 - 480
            thread - module 0,125 - 120 mm
            thread - inch 60 - 1 1/16 inch.
            Whitworth-thread 240 - 1/4 TPI
            bed width 700 mm
            spindle cone Gr. 15
            number of feeds 160
            longitudinal feeds: 0,032 - 38,9 mm/U
            face feeds 0,016 - 19,45 mm
            face slide travel 525 mm
            upper slide-adjustment 270 mm
            diameter of quill 125 mm
            MK 6
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also
            available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 800 x 3000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011411 · Center Lathe

          ZMM - CU 800 x 3000 - - 2023 -

          Technical details
          turning diameter over bed 890 mm︱turning diameter over slide rest 490 mm︱turning length 3000 (1500 bis 6000) mm︱spindle bore 155 mm︱turning dia. in gap 1250 mm︱spindle turning speed range 5 - 1000 U/min︱thread 80 Stufen︱metric threading 0,5 - 480 ︱thread - module 0,125 - 120 mm︱thread - inch 60 - 1 1/16 inch.︱Whitworth-thread 240 - 1/4 TPI︱bed width 700 mm︱spindle cone Gr. 15 ︱longitudinal feeds: 0,032 - 38,9 mm/U︱face feeds 0,016 - 19,45 mm︱spindle cone MT 160 ︱face slide travel 525 mm︱upper slide-adjustment 270 mm︱diameter of quill 125 mm︱ MK 6
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 890 mm
            turning diameter over slide rest 490 mm
            turning length 3000 (1500 bis 6000) mm
            spindle bore 155 mm
            turning dia. in gap 1250 mm
            spindle turning speed range 5 - 1000 U/min
            thread 80 Stufen
            metric threading 0,5 - 480
            thread - module 0,125 - 120 mm
            thread - inch 60 - 1 1/16 inch.
            Whitworth-thread 240 - 1/4 TPI
            bed width 700 mm
            spindle cone Gr. 15
            longitudinal feeds: 0,032 - 38,9 mm/U
            face feeds 0,016 - 19,45 mm
            spindle cone MT 160
            face slide travel 525 mm
            upper slide-adjustment 270 mm
            diameter of quill 125 mm
            MK 6
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also
            available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 800 x 1500 VAC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011525 · Center Lathe

          ZMM - CU 800 x 1500 VAC - - 2023 -

          Technical details
          turning diameter over bed 890 mm︱turning diameter over slide rest 490 mm︱turning length 1500 bis 6000 mm︱spindle bore 155 mm︱turning dia. in gap 1050 mm︱spindle turning speed - stepless 10 - 1200 U/min︱metric threading 0,5 - 480 ︱thread - module 0,125 - 120 mm︱thread - inch inch.︱Whitworth-thread 0,0625 - 60 TPI︱bed width 700 mm︱spindle cone Gr. 15 ︱number of feeds 80 mm/U︱longitudinal feeds: 0,032 - 38,9 mm/U︱face feeds 0,016 - 19,45 mm︱thread 80 Stufen︱face slide travel 525 mm︱upper slide-adjustment 270 mm︱diameter of quill 125 mm︱ MT6
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 890 mm
            turning diameter over slide rest 490 mm
            turning length 1500 bis 6000 mm
            spindle bore 155 mm
            turning dia. in gap 1050 mm
            spindle turning speed - stepless 10 - 1200 U/min
            metric threading 0,5 - 480
            thread - module 0,125 - 120 mm
            Whitworth-thread 0,0625 - 60 TPI
            bed width 700 mm
            spindle cone Gr. 15
            number of feeds 80 mm/U
            longitudinal feeds: 0,032 - 38,9 mm/U
            face feeds 0,016 - 19,45 mm
            thread 80 Stufen
            face slide travel 525 mm
            upper slide-adjustment 270 mm
            diameter of quill 125 mm
            MT6
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 500 x 1000 MT


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011522 · Center Lathe

          ZMM - CU 500 x 1000 MT - - 2023 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1000 bis 5000 mm︱spindle bore 103 mm︱turning dia. in gap 700 mm︱number of spindle speeds 11,5 - 1400 ︱metric threading 0,5 - 120 ︱thread - module 0,125 - 30 mm︱Whitworth-thread 0,25 - 60 TPI︱bed width 400 mm︱spindle cone Gr. 11 ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱thread 64 Stufen︱face slide travel 315 mm︱upper slide-adjustment 130 kW︱diameter of quill 130 mm︱ MTS ︱quill stroke 250 mm︱
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 1000 bis 5000 mm
            spindle bore 103 mm
            turning dia. in gap 700 mm
            number of spindle speeds 11,5 - 1400
            metric threading 0,5 - 120
            thread - module 0,125 - 30 mm
            Whitworth-thread 0,25 - 60 TPI
            bed width 400 mm
            spindle cone Gr. 11
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            thread 64 Stufen
            face slide travel 315 mm
            upper slide-adjustment 130 kW
            diameter of quill 130 mm
            MTS
            quill stroke 250 mm
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial
            applications. Users are very enthousiastic about these machines! Also available
            in: 1,5m, 2m, 3m and 4m.

            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 1250 x 6000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011450 · Center Lathe

          ZMM - CU 1250 x 6000 - - 2023 -

          Technical details
          turning diameter over bed 1320 mm︱turning diameter over slide rest 940 mm︱turning length 6000 (1500 bis 6000) mm︱spindle bore 155 mm︱turning dia. in gap 1500 mm︱spindle turning speed range 5 - 1000 U/min︱thread 80 Stufen︱metric threading 0,5 - 480 mm︱thread - module 0,125 - 120 mm︱thread - inch 60 - 1/!16 inch.︱Whitworth-thread 0,0625 - 60 TPI︱bed width 700 mm︱spindle cone Gr. 15 ︱number of feeds 160 mm/U︱longitudinal feeds: 0,032 - 38,9 mm/U︱face feeds 0,016 - 19,45 mm︱face slide travel 685 mm︱upper slide-adjustment 270 mm︱diameter of quill 125 mm︱ MT6
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 1320 mm
            turning diameter over slide rest 940 mm
            turning length 6000 (1500 bis 6000) mm
            spindle bore 155 mm
            turning dia. in gap 1500 mm
            spindle turning speed range 5 - 1000 U/min
            thread 80 Stufen
            metric threading 0,5 - 480 mm
            thread - module 0,125 - 120 mm
            thread - inch 60 - 1/!16 inch.
            Whitworth-thread 0,0625 - 60 TPI
            bed width 700 mm
            spindle cone Gr. 15
            number of feeds 160 mm/U
            longitudinal feeds: 0,032 - 38,9 mm/U
            face feeds 0,016 - 19,45 mm
            face slide travel 685 mm
            upper slide-adjustment 270 mm
            diameter of quill 125 mm
            MT6
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also
            available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 500 x 1000 M VAC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011521 · Center Lathe

          ZMM - CU 500 x 1000 M VAC - - 2023 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1000 bis 4000 mm︱spindle bore 72 mm︱turning dia. in gap 700 mm︱spindle turning speed - stepless 20 - 2000 U/min︱metric threading 0,5 - 120 ︱thread - module 0,125 - 30 mm︱thread - inch inch.︱Whitworth-thread 0,25 - 60 TPI︱bed width 400 mm︱spindle cone Gr. 8 ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱thread 64 Stufen︱face slide travel 315 mm︱upper slide-adjustment 130 kW︱diameter of quill 75 mm︱ MTS
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 1000 bis 4000 mm
            spindle bore 72 mm
            turning dia. in gap 700 mm
            spindle turning speed - stepless 20 - 2000 U/min
            metric threading 0,5 - 120
            thread - module 0,125 - 30 mm
            Whitworth-thread 0,25 - 60 TPI
            bed width 400 mm
            spindle cone Gr. 8
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            thread 64 Stufen
            face slide travel 315 mm
            upper slide-adjustment 130 kW
            diameter of quill 75 mm
            MTS
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial
            applications. Users are very enthousiastic about these machines! Also available
            in: 1,5m, 2m, 3m and 4m.

            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 630 x 1000 VAC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011524 · Center Lathe

          ZMM - CU 630 x 1000 VAC - - 2023 -

          Technical details
          turning diameter over bed 630 mm︱turning diameter over slide rest 430 mm︱turning length 1000 bis 5000 mm︱spindle bore 103 mm︱turning dia. in gap 830 mm︱spindle turning speed - stepless 20 - 2000 U/min︱metric threading 0,5 - 120 ︱thread - module 0,125 - 30 mm︱thread - inch inch.︱Whitworth-thread 0,25 -60 TPI︱bed width 500 mm︱spindle cone Gr. 11 ︱number of feeds 64 mm/U︱longitudinal feeds: 0,04 -12 mm/U︱face feeds 0,02 - 6 mm︱thread 64 Stufen︱face slide travel 315 mm︱upper slide-adjustment 130 mm︱diameter of quill 75 mm︱ MT5
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 630 mm
            turning diameter over slide rest 430 mm
            turning length 1000 bis 5000 mm
            spindle bore 103 mm
            turning dia. in gap 830 mm
            spindle turning speed - stepless 20 - 2000 U/min
            metric threading 0,5 - 120
            thread - module 0,125 - 30 mm
            Whitworth-thread 0,25 -60 TPI
            bed width 500 mm
            spindle cone Gr. 11
            number of feeds 64 mm/U
            longitudinal feeds: 0,04 -12 mm/U
            face feeds 0,02 - 6 mm
            thread 64 Stufen
            face slide travel 315 mm
            upper slide-adjustment 130 mm
            diameter of quill 75 mm
            MT5
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 580 x 1000 VAC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011523 · Center Lathe

          ZMM - CU 580 x 1000 VAC - - 2023 -

          Technical details
          turning diameter over bed 580 mm︱turning diameter over slide rest 380 mm︱turning length 1000 bis 5000 mm︱spindle bore 72 mm︱turning dia. in gap 780 mm︱spindle turning speed - stepless 10 - 1200 U/min︱metric threading 0,5 - 120 ︱thread - module 0,125 - 30 mm︱thread - inch inch.︱Whitworth-thread 0,25 -60 TPI︱bed width 400 mm︱spindle cone Gr. 8 ︱number of feeds 80 mm/U︱longitudinal feeds: 0,04 -12 mm/U︱face feeds 0,02 - 6 mm︱thread 64 Stufen︱face slide travel 315 mm︱upper slide-adjustment 130 mm︱diameter of quill 75 mm︱ MT5
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 580 mm
            turning diameter over slide rest 380 mm
            turning length 1000 bis 5000 mm
            spindle bore 72 mm
            turning dia. in gap 780 mm
            spindle turning speed - stepless 10 - 1200 U/min
            metric threading 0,5 - 120
            thread - module 0,125 - 30 mm
            Whitworth-thread 0,25 -60 TPI
            bed width 400 mm
            spindle cone Gr. 8
            number of feeds 80 mm/U
            longitudinal feeds: 0,04 -12 mm/U
            face feeds 0,02 - 6 mm
            thread 64 Stufen
            face slide travel 315 mm
            upper slide-adjustment 130 mm
            diameter of quill 75 mm
            MT5
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 1000 x 4000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011429 · Center Lathe

          ZMM - CU 1000 x 4000 - - 2023 -

          Technical details
          turning diameter over bed 1090 mm︱turning diameter over slide rest 690 mm︱turning length 4000 (1500 bis 6000) mm︱spindle bore 155 mm︱turning dia. in gap 1250 mm︱spindle turning speed range 5 - 1000 U/min︱thread 80 Stufen︱metric threading 0,5 - 480 ︱thread - module 0,125 - 120 mm︱thread - inch 60 - 1 1/16 inch.︱Whitworth-thread 240 - 1/4 TPI︱bed width 700 mm︱spindle cone Gr. 15 ︱number of feeds 160 ︱longitudinal feeds: 0,032 - 38,9 mm/U︱face feeds 0,016 - 19,45 mm︱face slide travel 525 mm︱upper slide-adjustment 270 mm︱diameter of quill 125 mm︱ MK 6
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 1090 mm
            turning diameter over slide rest 690 mm
            turning length 4000 (1500 bis 6000) mm
            spindle bore 155 mm
            turning dia. in gap 1250 mm
            spindle turning speed range 5 - 1000 U/min
            thread 80 Stufen
            metric threading 0,5 - 480
            thread - module 0,125 - 120 mm
            thread - inch 60 - 1 1/16 inch.
            Whitworth-thread 240 - 1/4 TPI
            bed width 700 mm
            spindle cone Gr. 15
            number of feeds 160
            longitudinal feeds: 0,032 - 38,9 mm/U
            face feeds 0,016 - 19,45 mm
            face slide travel 525 mm
            upper slide-adjustment 270 mm
            diameter of quill 125 mm
            MK 6
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also
            available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM C 10 THS 4000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011505 · Center Lathe

          ZMM - C 10 THS 4000 - - 2023 -

          Technical details
          turning diameter over bed 860 mm︱turning diameter over slide rest 620 mm︱turning length 4000 (1,5m,2m,3m,5m, 6m) mm︱turning dia. in gap 1050 mm︱bed width 560 mm︱spindle nose 11 ︱spindle bore 132 mm︱transmission ratio 3 ︱spindle turning speed - stepless 12,5-100, 50-415,150-1250 U/min︱thread 76 Stufen︱metrical thread cutting 0,5 - 90 mm︱thread - inch 60 - 1/3 inch.︱thread - module 0,125 - 22,5 ︱Whitworth-thread 240 - 1 1/3 DP︱number of feeds 150 mm/U︱rapid traverse longitudinal 3800 mm/min︱longitudinal feeds: 0,039 - 18 mm/U︱face feeds 0,02 - 9 mm/U︱face slide travel 432 mm︱upper slide-adjustment 150 mm︱
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 860 mm
            turning diameter over slide rest 620 mm
            turning length 4000 (1,5m,2m,3m,5m, 6m) mm
            turning dia. in gap 1050 mm
            bed width 560 mm
            spindle nose 11
            spindle bore 132 mm
            transmission ratio 3
            spindle turning speed - stepless 12,5-100, 50-415,150-1250 U/min
            thread 76 Stufen
            metrical thread cutting 0,5 - 90 mm
            thread - inch 60 - 1/3 inch.
            thread - module 0,125 - 22,5
            Whitworth-thread 240 - 1 1/3 DP
            number of feeds 150 mm/U
            rapid traverse longitudinal 3800 mm/min
            longitudinal feeds: 0,039 - 18 mm/U
            face feeds 0,02 - 9 mm/U
            face slide travel 432 mm
            upper slide-adjustment 150 mm
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also
            available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 400 x 5000 M


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011241 · Center Lathe

          ZMM - CU 400 x 5000 M - - 2023 -

          Technical details
          turning diameter over bed 440 mm︱turning diameter over slide rest 240 mm︱turning length 5000 (1000 - 5000mm) mm︱spindle bore 72 mm︱turning dia. in gap 640 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 400 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 3500 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱ MK 5 ︱quill stroke 230 mm︱
          LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability in the most demanding working conditions. The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.
            turning diameter over bed 440 mm
            turning diameter over slide rest 240 mm
            turning length 5000 (1000 - 5000mm) mm
            spindle bore 72 mm
            turning dia. in gap 640 mm
            spindle turning speed range (21) 20 - 2000 U/min
            metric threading 0,5 - 120 mm
            thread - inch 60 - 1/4 inch.
            thread - module 0,125 - 30 Tpi
            Whitworth-thread 240 - 1 DP
            bed width 400 mm
            spindle cone gr. 8 (DIN 55027)
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            cross adjustment 3500 mm
            upper slide-adjustment 130 mm
            diameter of quill 90 mm
            MK 5
            quill stroke 230 mm
            Description :
            LZ lathe for industry and training
            Excellent quality in accuracy and stability,
            which has the consequence fstability
            a smooth running behavior is guaranteed and thus also a clean turning behavior.
            The machine is also reliable and easy to use.
            The CU 325 is ideal for small series production as well as repair work and can
            also be used in training. They are built to last and for consistent performance
            and durability in the most demanding working conditions.
            The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 325 x 750


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011199 · Center Lathe

          ZMM - CU 325 x 750 - - 2023 -

          Technical details
          turning diameter over bed 325 mm︱turning diameter over slide rest 190 mm︱turning length 750 (500 o.1000) mm︱spindle bore 32 mm︱turning dia. in gap 440 mm︱spindle turning speed range (12) 85 - 2000 U/min︱metric threading (48) 0,1 -28 mm︱thread - inch (53) 75 -2,5 inch.︱thread - module (19) 0,1 - 1,75 Tpi︱Whitworth-thread (19) 70 - 4 DP︱bed width 200 mm︱spindle cone gr. 5 ︱number of feeds 48 mm/U︱longitudinal feeds: 0,006 - 1,77 mm/U︱face feeds 0,003 - 0,888 mm︱upper slide-adjustment 95 mm︱diameter of quill 40 mm︱ gr. 3 ︱quill stroke 100 mm︱total power requirement 2,2 kW︱
          LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability in the most demanding working conditions. The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.
            turning diameter over bed 325 mm
            turning diameter over slide rest 190 mm
            turning length 750 (500 o.1000) mm
            spindle bore 32 mm
            turning dia. in gap 440 mm
            spindle turning speed range (12) 85 - 2000 U/min
            metric threading (48) 0,1 -28 mm
            thread - inch (53) 75 -2,5 inch.
            thread - module (19) 0,1 - 1,75 Tpi
            Whitworth-thread (19) 70 - 4 DP
            bed width 200 mm
            spindle cone gr. 5
            number of feeds 48 mm/U
            longitudinal feeds: 0,006 - 1,77 mm/U
            face feeds 0,003 - 0,888 mm
            upper slide-adjustment 95 mm
            diameter of quill 40 mm
            gr. 3
            quill stroke 100 mm
            total power requirement 2,2 kW
            Description :
            LZ lathe for industry and training
            Excellent quality in accuracy and stability,
            which has the consequence fstability
            a smooth running behavior is guaranteed and thus also a clean turning behavior.
            The machine is also reliable and easy to use.
            The CU 325 is ideal for small series production as well as repair work and can
            also be used in training. They are built to last and for consistent performance
            and durability in the most demanding working conditions.
            The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 800 x 4000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011414 · Center Lathe

          ZMM - CU 800 x 4000 - - 2023 -

          Technical details
          turning diameter over bed 890 mm︱turning diameter over slide rest 490 mm︱turning length 4000 (1500 bis 6000) mm︱spindle bore 155 mm︱turning dia. in gap 1250 mm︱spindle turning speed range 5 - 1000 U/min︱thread 80 Stufen︱metric threading 0,5 - 480 ︱thread - module 0,125 - 120 mm︱thread - inch 60 - 1 1/16 inch.︱Whitworth-thread 240 - 1/4 TPI︱bed width 700 mm︱spindle cone Gr. 15 ︱longitudinal feeds: 0,032 - 38,9 mm/U︱face feeds 0,016 - 19,45 mm︱spindle cone MT 160 ︱face slide travel 525 mm︱upper slide-adjustment 270 mm︱diameter of quill 125 mm︱ MK 6
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 890 mm
            turning diameter over slide rest 490 mm
            turning length 4000 (1500 bis 6000) mm
            spindle bore 155 mm
            turning dia. in gap 1250 mm
            spindle turning speed range 5 - 1000 U/min
            thread 80 Stufen
            metric threading 0,5 - 480
            thread - module 0,125 - 120 mm
            thread - inch 60 - 1 1/16 inch.
            Whitworth-thread 240 - 1/4 TPI
            bed width 700 mm
            spindle cone Gr. 15
            longitudinal feeds: 0,032 - 38,9 mm/U
            face feeds 0,016 - 19,45 mm
            spindle cone MT 160
            face slide travel 525 mm
            upper slide-adjustment 270 mm
            diameter of quill 125 mm
            MK 6
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also
            available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM C 10 TS 4000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011469 · Center Lathe

          ZMM - C 10 TS 4000 - - 2023 -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 420 mm︱turning length 4000 (1,5m,2m,3m,5m, 6m) mm︱turning dia. in gap 850 mm︱bed width 560 mm︱spindle nose 11 ︱spindle bore 103 mm︱transmission ratio 3 ︱spindle turning speed - stepless 9-55, 37-220, 220-1320 U/min︱thread 76 Stufen︱metrical thread cutting 0,5 - 180 mm︱thread - inch 60 - 1/6 inch.︱thread - module 0,125 - 45 ︱Whitworth-thread 240 - 2/3 DP︱number of feeds 150 mm/U︱longitudinal feeds: 0,039 - 18 mm/U︱face feeds 0,02 - 9 mm/U︱face slide travel 410 mm︱upper slide-adjustment 150 mm︱diameter of quill 105 mm︱
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 660 mm
            turning diameter over slide rest 420 mm
            turning length 4000 (1,5m,2m,3m,5m, 6m) mm
            turning dia. in gap 850 mm
            bed width 560 mm
            spindle nose 11
            spindle bore 103 mm
            transmission ratio 3
            spindle turning speed - stepless 9-55, 37-220, 220-1320 U/min
            thread 76 Stufen
            metrical thread cutting 0,5 - 180 mm
            thread - inch 60 - 1/6 inch.
            thread - module 0,125 - 45
            Whitworth-thread 240 - 2/3 DP
            number of feeds 150 mm/U
            longitudinal feeds: 0,039 - 18 mm/U
            face feeds 0,02 - 9 mm/U
            face slide travel 410 mm
            upper slide-adjustment 150 mm
            diameter of quill 105 mm
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also
            available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 800 x 1500


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011408 · Center Lathe

          ZMM - CU 800 x 1500 - - 2023 -

          Technical details
          turning diameter over bed 890 mm︱turning diameter over slide rest 490 mm︱turning length 1500 (bis 6000) mm︱spindle bore 155 mm︱turning dia. in gap 1250 mm︱spindle turning speed range 5 - 1000 U/min︱thread 80 Stufen︱metric threading 0,5 - 480 ︱thread - module 0,125 - 120 mm︱thread - inch 60 - 1 1/16 inch.︱Whitworth-thread 240 - 1/4 TPI︱bed width 700 mm︱spindle cone Gr. 15 ︱longitudinal feeds: 0,032 - 38,9 mm/U︱face feeds 0,016 - 19,45 mm︱spindle cone MT 160 ︱face slide travel 525 mm︱upper slide-adjustment 270 mm︱diameter of quill 125 mm︱ MK 6
          Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. variable speed, 3 steps rapid traverse through joystick protective covers halogen machine light cooling system
            turning diameter over bed 890 mm
            turning diameter over slide rest 490 mm
            turning length 1500 (bis 6000) mm
            spindle bore 155 mm
            turning dia. in gap 1250 mm
            spindle turning speed range 5 - 1000 U/min
            thread 80 Stufen
            metric threading 0,5 - 480
            thread - module 0,125 - 120 mm
            thread - inch 60 - 1 1/16 inch.
            Whitworth-thread 240 - 1/4 TPI
            bed width 700 mm
            spindle cone Gr. 15
            longitudinal feeds: 0,032 - 38,9 mm/U
            face feeds 0,016 - 19,45 mm
            spindle cone MT 160
            face slide travel 525 mm
            upper slide-adjustment 270 mm
            diameter of quill 125 mm
            MK 6
            Description :
            Huvema’s range of European production lathes. Fitted out with variable speed
            and fully protected. These machines are perfect for all industrial applications.
            Users are very enthousiastic about these machines! Also available in: Also
            available
            in: 1,5m, 2 m - 6 m.


            variable speed, 3 steps
            rapid traverse through joystick
            protective covers
            halogen machine light
            cooling system



        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 400 x 1000 M


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011226 · Center Lathe

          ZMM - CU 400 x 1000 M - - 2023 -

          Technical details
          turning diameter over bed 440 mm︱turning diameter over slide rest 240 mm︱turning length 1000 (1500, 2000- 5000mm) mm︱spindle bore 72 mm︱turning dia. in gap 640 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 400 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 315 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱ MK 5 ︱quill stroke 230 mm︱
          LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability in the most demanding working conditions. The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.
            turning diameter over bed 440 mm
            turning diameter over slide rest 240 mm
            turning length 1000 (1500, 2000- 5000mm) mm
            spindle bore 72 mm
            turning dia. in gap 640 mm
            spindle turning speed range (21) 20 - 2000 U/min
            metric threading 0,5 - 120 mm
            thread - inch 60 - 1/4 inch.
            thread - module 0,125 - 30 Tpi
            Whitworth-thread 240 - 1 DP
            bed width 400 mm
            spindle cone gr. 8 (DIN 55027)
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            cross adjustment 315 mm
            upper slide-adjustment 130 mm
            diameter of quill 90 mm
            MK 5
            quill stroke 230 mm
            Description :
            LZ lathe for industry and training
            Excellent quality in accuracy and stability,
            which has the consequence fstability
            a smooth running behavior is guaranteed and thus also a clean turning behavior.
            The machine is also reliable and easy to use.
            The CU 325 is ideal for small series production as well as repair work and can
            also be used in training. They are built to last and for consistent performance
            and durability in the most demanding working conditions.
            The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 400 x 1500 MT


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011206 · Center Lathe

          ZMM - CU 400 x 1500 MT - - 2023 -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 236 mm︱turning length 1500 (or 750, 1000) mm︱spindle bore 52 mm︱turning dia. in gap 550 mm︱spindle turning speed range (12) 50 - 2240 U/min︱metric threading 0,25 - 7,5 mm︱thread - inch 120 - 4 inch.︱thread - module 0,0625 - 1,875 Tpi︱Whitworth-thread 480 - 16 DP︱bed width 320 mm︱spindle cone gr. 6 (DIN 55027) ︱number of feeds 80 mm/U︱longitudinal feeds: 0,015 - 0,6 mm/U︱face feeds 0,0075 - 0,3 mm︱cross adjustment 235 mm︱upper slide-adjustment 110 mm︱diameter of quill 50 mm︱ MK 4 ︱quill stroke 100 mm︱
          LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability in the most demanding working conditions. The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.
            turning diameter over bed 400 mm
            turning diameter over slide rest 236 mm
            turning length 1500 (or 750, 1000) mm
            spindle bore 52 mm
            turning dia. in gap 550 mm
            spindle turning speed range (12) 50 - 2240 U/min
            metric threading 0,25 - 7,5 mm
            thread - inch 120 - 4 inch.
            thread - module 0,0625 - 1,875 Tpi
            Whitworth-thread 480 - 16 DP
            bed width 320 mm
            spindle cone gr. 6 (DIN 55027)
            number of feeds 80 mm/U
            longitudinal feeds: 0,015 - 0,6 mm/U
            face feeds 0,0075 - 0,3 mm
            cross adjustment 235 mm
            upper slide-adjustment 110 mm
            diameter of quill 50 mm
            MK 4
            quill stroke 100 mm
            Description :
            LZ lathe for industry and training
            Excellent quality in accuracy and stability,
            which has the consequence fstability
            a smooth running behavior is guaranteed and thus also a clean turning behavior.
            The machine is also reliable and easy to use.
            The CU 325 is ideal for small series production as well as repair work and can
            also be used in training. They are built to last and for consistent performance
            and durability in the most demanding working conditions.
            The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 400 x 1500 M


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011229 · Center Lathe

          ZMM - CU 400 x 1500 M - - 2023 -

          Technical details
          turning diameter over bed 440 mm︱turning diameter over slide rest 240 mm︱turning length 1500 (1000, 5000mm) mm︱spindle bore 72 mm︱turning dia. in gap 640 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 400 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 3100 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱ MK 5 ︱quill stroke 230 mm︱
          LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability in the most demanding working conditions. The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.
            turning diameter over bed 440 mm
            turning diameter over slide rest 240 mm
            turning length 1500 (1000, 5000mm) mm
            spindle bore 72 mm
            turning dia. in gap 640 mm
            spindle turning speed range (21) 20 - 2000 U/min
            metric threading 0,5 - 120 mm
            thread - inch 60 - 1/4 inch.
            thread - module 0,125 - 30 Tpi
            Whitworth-thread 240 - 1 DP
            bed width 400 mm
            spindle cone gr. 8 (DIN 55027)
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            cross adjustment 3100 mm
            upper slide-adjustment 130 mm
            diameter of quill 90 mm
            MK 5
            quill stroke 230 mm
            Description :
            LZ lathe for industry and training
            Excellent quality in accuracy and stability,
            which has the consequence fstability
            a smooth running behavior is guaranteed and thus also a clean turning behavior.
            The machine is also reliable and easy to use.
            The CU 325 is ideal for small series production as well as repair work and can
            also be used in training. They are built to last and for consistent performance
            and durability in the most demanding working conditions.
            The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 400 x 1500


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011211 · Center Lathe

          ZMM - CU 400 x 1500 - - 2023 -

          Technical details
          turning diameter over bed 440 mm︱turning diameter over slide rest 230 mm︱turning length 1500 mm(or 1000, 2000mm) mm︱spindle bore 62 mm︱turning dia. in gap 620 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 360 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 250 mm︱upper slide-adjustment 130 mm︱diameter of quill 70 mm︱ MK 5 ︱quill stroke 180 mm︱
          LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability in the most demanding working conditions. The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.
            turning diameter over bed 440 mm
            turning diameter over slide rest 230 mm
            turning length 1500 mm(or 1000, 2000mm) mm
            spindle bore 62 mm
            turning dia. in gap 620 mm
            spindle turning speed range (21) 20 - 2000 U/min
            metric threading 0,5 - 120 mm
            thread - inch 60 - 1/4 inch.
            thread - module 0,125 - 30 Tpi
            Whitworth-thread 240 - 1 DP
            bed width 360 mm
            spindle cone gr. 8 (DIN 55027)
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            cross adjustment 250 mm
            upper slide-adjustment 130 mm
            diameter of quill 70 mm
            MK 5
            quill stroke 180 mm
            Description :
            LZ lathe for industry and training
            Excellent quality in accuracy and stability,
            which has the consequence fstability
            a smooth running behavior is guaranteed and thus also a clean turning behavior.
            The machine is also reliable and easy to use.
            The CU 325 is ideal for small series production as well as repair work and can
            also be used in training. They are built to last and for consistent performance
            and durability in the most demanding working conditions.
            The CU model is available with 3 turning lengths 500 mm, 750 mm and 1000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 500 x 2000 M


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011259 · Center Lathe

          ZMM - CU 500 x 2000 M - - 2023 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 2000 (1000 - 5000mm) mm︱spindle bore 72 mm︱turning dia. in gap 700 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 400 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 315 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱ MK 5 ︱quill stroke 230 mm︱
          LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also a clean turning behavior. Furthermore, the machine is characterized by reliable and easy operation. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability among the most demanding Working conditions. The CU model is available with 3 turning lengths 1000, 1500, 2000, 3000, 4000, 5000 mm.
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 2000 (1000 - 5000mm) mm
            spindle bore 72 mm
            turning dia. in gap 700 mm
            spindle turning speed range (21) 20 - 2000 U/min
            metric threading 0,5 - 120 mm
            thread - inch 60 - 1/4 inch.
            thread - module 0,125 - 30 Tpi
            Whitworth-thread 240 - 1 DP
            bed width 400 mm
            spindle cone gr. 8 (DIN 55027)
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            cross adjustment 315 mm
            upper slide-adjustment 130 mm
            diameter of quill 90 mm
            MK 5
            quill stroke 230 mm
            Description :
            LZ lathe for industry and training

            Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm

            Excellent quality in terms of accuracy and stability, resulting in
            that through the stability
            a quiet running behavior is guaranteed and thus also a clean
            turning behavior. Furthermore, the machine is characterized by reliable and
            easy operation.
            The CU 325 is ideal for small series production as well as repair work and
            can also be used in training. They are built to last and for
            consistent performance and durability among the most demanding
            Working conditions.

            The CU model is available with 3 turning lengths 1000, 1500, 2000, 3000, 4000,
            5000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 580 x 3000 M


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011279 · Center Lathe

          ZMM - CU 580 x 3000 M - - 2023 -

          Technical details
          turning diameter over bed 580 mm︱turning diameter over slide rest 380 mm︱turning length 3000 (1000 - 5000 mm) mm︱spindle bore 72 mm︱turning dia. in gap 780 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 400 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 315 mm︱upper slide-adjustment 130 mm︱diameter of quill 90 mm︱ MK 5 ︱quill stroke 230 mm︱
          LZ lathe for industry and training Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm Excellent quality in terms of accuracy and stability, resulting in that through the stability a quiet running behavior is guaranteed and thus also a clean turning behavior. Furthermore, the machine is characterized by reliable and easy operation. The CU 325 is ideal for small series production as well as repair work and can also be used in training. They are built to last and for consistent performance and durability among the most demanding Working conditions. The CU model is available with 3 turning lengths 1000, 1500, 2000, 3000, 4000, 5000 mm.
            turning diameter over bed 580 mm
            turning diameter over slide rest 380 mm
            turning length 3000 (1000 - 5000 mm) mm
            spindle bore 72 mm
            turning dia. in gap 780 mm
            spindle turning speed range (21) 20 - 2000 U/min
            metric threading 0,5 - 120 mm
            thread - inch 60 - 1/4 inch.
            thread - module 0,125 - 30 Tpi
            Whitworth-thread 240 - 1 DP
            bed width 400 mm
            spindle cone gr. 8 (DIN 55027)
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            cross adjustment 315 mm
            upper slide-adjustment 130 mm
            diameter of quill 90 mm
            MK 5
            quill stroke 230 mm
            Description :
            LZ lathe for industry and training

            Available in 3 sizes 1000, 1500 and 2000, 3000, 4000 and 50000 mm

            Excellent quality in terms of accuracy and stability, resulting in
            that through the stability
            a quiet running behavior is guaranteed and thus also a clean
            turning behavior. Furthermore, the machine is characterized by reliable and
            easy operation.
            The CU 325 is ideal for small series production as well as repair work and
            can also be used in training. They are built to last and for
            consistent performance and durability among the most demanding
            Working conditions.

            The CU model is available with 3 turning lengths 1000, 1500, 2000, 3000, 4000,
            5000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM CU 500 x 1000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-011217 · Center Lathe

          ZMM - CU 500 x 1000 - - 2023 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1000 (or 1500, 2000 mm) mm︱spindle bore 62 mm︱turning dia. in gap 670 mm︱spindle turning speed range (21) 20 - 2000 U/min︱metric threading 0,5 - 120 mm︱thread - inch 60 - 1/4 inch.︱thread - module 0,125 - 30 Tpi︱Whitworth-thread 240 - 1 DP︱bed width 360 mm︱spindle cone gr. 8 (DIN 55027) ︱number of feeds 120 mm/U︱longitudinal feeds: 0,04 - 12 mm/U︱face feeds 0,02 - 6 mm︱cross adjustment 250 mm︱upper slide-adjustment 130 mm︱diameter of quill 70 mm︱ MK 5 ︱quill stroke 180 mm︱
          Excellent quality in terms of accuracy and stability, resulting in That through the stability a quiet running behavior is guaranteed and thus also a clean turning behavior. Furthermore, the machine is characterized by reliable and easy operation. The CU model is available with 3 turning lengths of 500 mm, 750 mm and 1000 mm.
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 1000 (or 1500, 2000 mm) mm
            spindle bore 62 mm
            turning dia. in gap 670 mm
            spindle turning speed range (21) 20 - 2000 U/min
            metric threading 0,5 - 120 mm
            thread - inch 60 - 1/4 inch.
            thread - module 0,125 - 30 Tpi
            Whitworth-thread 240 - 1 DP
            bed width 360 mm
            spindle cone gr. 8 (DIN 55027)
            number of feeds 120 mm/U
            longitudinal feeds: 0,04 - 12 mm/U
            face feeds 0,02 - 6 mm
            cross adjustment 250 mm
            upper slide-adjustment 130 mm
            diameter of quill 70 mm
            MK 5
            quill stroke 180 mm
            Description :
            Excellent quality in terms of accuracy and stability, resulting in
            That through the stability
            a quiet running behavior is guaranteed and thus also a clean
            turning behavior. Furthermore, the machine is characterized by reliable and
            easy operation.

            The CU model is available with 3 turning lengths of 500 mm, 750 mm and 1000 mm.


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •