Bitte einen Suchbegriff eingeben - Wprowadź wyszukiwane hasło
Kategoria:
    Producent:
      maszyny:
        Handlowiec:

          Sanding machine

          Machinelist: Sanding machine


          Sanding machine

          used Window production: wood Sanding machine HESS BS200


          • Bort&Herkert GmbH
          • Ringstraße 43-45
          • 74626 Bretzfeld
          • Deutschland

          • +49 (0) 7946/9278-0
            +49 (0) 7946/9278-99
          • info@bort-herkert.de
            www.bort-herkert.de
          #1325-26048 · Sanding machine

          HESS - BS200 - - unbekannt -

          Technical details
          Number of sanding units 2 st.︱sanding width ca. 180 mm︱Sanding height max. 12 - 140 mm︱
            Number of sanding units 2 st.
            sanding width ca. 180 mm
            Sanding height max. 12 - 140 mm


        • Bort&Herkert GmbH
        • Ringstraße 43-45
        • 74626 Bretzfeld
        • Deutschland

        • 2.900 €
          Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER Leistomat SD


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2729 · Sanding machine

          LÖWER - Leistomat SD - - neuwertig -

          Technical details
          Number of sanding units 8 st.︱sanding width 180 (260) mm︱Sanding height max. 160 mm︱Dimensions (length / width) 3065x1600x1900 mm︱weight of the machine ca. 1500 kg︱
          Löwer Leistomad SD Window single wood intermediate sanding machine --------------------------------- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding units via linear ball bearing sets hardened waves - Time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By immersing it is possible To be able to deliver aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter to adjust the Grinding intensity using frequency converters (separately for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fasteners for grinding discs (wood pulp) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with continuous speed 5-15m/min - Parameters that can be set using the touch panel are workpiece thickness and workpiece width (left side units individually), immersion depth of side units, Spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and profile shape (Workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic clamping of the workpiece as well as retraction after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm - Workpiece height 12-120mm - Suction connection 5 x 100mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length: 3800mm (including inlet roller conveyor with stop for Leistomat SD) - Weight: approx. 1500 kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version -------------------------------- Included options: Adjust the machine as follows: - max. workpiece thickness: 160mm - max. workpiece width: 260mm (in the transshipment process, workpieces must be 2x be allowed through) Transport belt width remains at 200mm - Side units with grinding height 120mm instead of 100mm - more powerful engines for side units 0.75kw instead of 0.37 - larger frequency converters for the side units Quick release disc spindle side for quick tool changes for DiscMaster 4TD or CrossMaster 2TD (only for clockwise rotation) Quick release disc tool for Softdisc, Combidisc or Mediumdisc Ø 250mm (only for clockwise rotation) --------------------------------- (Technical description according to the manufacturer - no guarantee!)
            Number of sanding units 8 st.
            sanding width 180 (260) mm
            Sanding height max. 160 mm
            Dimensions (length / width) 3065x1600x1900 mm
            weight of the machine ca. 1500 kg
            Description :
            Löwer Leistomad SD
            Window single wood intermediate sanding machine
            ---------------------------------
            Machine factory tested by Löwer!

            Automatic fine grinding machine for wood grinding (smoothing, defibering and
            Edge breaking) or intermediate sanding of profiled window bars. With soft disc
            Technology for the visible surfaces as well as automatically safe profile and
            Width adjustment.

            - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm
            - 1 softisc unit Ø=200mm above 0.75kW,
            - 1 slat roller unit L=200mm above 0.75kW

            - 1 soft disc unit Ø=200mm below 0.75kW,
            - 1 lamella roller unit L=200mm below 0.75kW,
            - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm

            - Linear guidance of all grinding units via linear ball bearing sets
            hardened waves

            - Time-controlled immersion of all lamella roller units directly above
            the incoming workpiece edges. By immersing it is possible
            To be able to deliver aggregates deeper into the profiles.

            - Motorized workpiece thickness adjustment of the machine

            - variable grinding flap speed via frequency converter to adjust the
            Grinding intensity using frequency converters (separately for discs,
            surface rollers and side rollers)

            - Disc aggregates as soft discs with Velcro fasteners for grinding discs
            (wood pulp)

            - Feed via three lower and one upper conveyor belt and spring-loaded
            Pressure rollers with continuous speed 5-15m/min

            - Parameters that can be set using the touch panel are workpiece thickness and
            workpiece width
            (left side units individually), immersion depth of side units,
            Spindle speed, feed speed

            - Saving the parameters as machine programs in program mode

            - Working in automatic mode with non-contact
            Workpiece width detection and profile detection as well as automatic
            Adjustment of the sanding units to the workpiece width and profile shape
            (Workpiece height is set in advance)

            - pneumatically clocked driven feed roller, automatic clamping
            of the workpiece as well as retraction after unit adjustment

            - Red/green indicator lights to indicate operational readiness

            - shortest workpiece length 380mm

            - Transport belt width 200mm

            - max. workpiece width 180mm

            - Workpiece height 12-120mm

            - Suction connection 5 x 100mm diameter

            - Sensor-controlled tool blow-off directly on the discs

            - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length:
            3800mm (including inlet roller conveyor with stop for Leistomat SD)

            - Weight: approx. 1500 kg

            - Operating voltage 400V, 50Hz, 3P, air connection 6 bar

            - CE version
            --------------------------------

            Included options:

            Adjust the machine as follows:
            - max. workpiece thickness: 160mm

            - max. workpiece width: 260mm (in the transshipment process, workpieces must be
            2x
            be allowed through) Transport belt width remains at 200mm

            - Side units with grinding height 120mm instead of 100mm

            - more powerful engines for side units 0.75kw instead of 0.37

            - larger frequency converters for the side units


            Quick release disc spindle side
            for quick tool changes
            for DiscMaster 4TD or CrossMaster 2TD
            (only for clockwise rotation)

            Quick release disc tool
            for Softdisc, Combidisc or Mediumdisc Ø 250mm
            (only for clockwise rotation)
            ---------------------------------

            (Technical description according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine QUICKWOOD QL 4-8


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5452 · Sanding machine

          QUICKWOOD - QL 4-8 - - neu -

          Technical details
          Number of sanding units 8 St.︱sanding width 300 mm︱Sanding height max. 100 mm︱
          Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine ------------------------------------------------------------------------------------------------------------- Maschine zur Längsholzbearbeitung - Lose Fasern werden von der Oberfläche entfernt - Erhebliche Reduzierung der Faserbildung nach der Grundierung - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur - Bessere Tiefenwirkung im Holz - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz - Stufenlose Einstellungen aller Geschwindigkeiten - Leichter Werkzeugwechsel durch abnehmbare Spindeln - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung - Optionale PLC-Steuerung vorgesehen Einsatzmöglichkeiten - Fensterflügel- und - Rahmeneinzelteile - Glasleisten - Profilbretter - Kranzprofile - Verkleidungen - Profilierte Leisten Angebot auf Anfrage! Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF! (techn. Angaben laut Hersteller - ohne Gewähr!)
            Number of sanding units 8 St.
            sanding width 300 mm
            Sanding height max. 100 mm
            Description :
            Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine
            -------------------------------------------------------------------------------------------------------------

            Maschine zur Längsholzbearbeitung
            - Lose Fasern werden von der Oberfläche entfernt
            - Erhebliche Reduzierung der Faserbildung nach der Grundierung
            - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur
            - Bessere Tiefenwirkung im Holz
            - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz
            - Stufenlose Einstellungen aller Geschwindigkeiten
            - Leichter Werkzeugwechsel durch abnehmbare Spindeln
            - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite
            - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung
            - Optionale PLC-Steuerung vorgesehen

            Einsatzmöglichkeiten
            - Fensterflügel- und
            - Rahmeneinzelteile
            - Glasleisten
            - Profilbretter
            - Kranzprofile
            - Verkleidungen
            - Profilierte Leisten

            Angebot auf Anfrage!
            Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF!
            (techn. Angaben laut Hersteller - ohne Gewähr!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine QUICKWOOD ROV 2600


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5453 · Sanding machine

          QUICKWOOD - ROV 2600 - - neu -

          Technical details
          Number of sanding units 32 St.︱sanding width 2600 mm︱Sanding height max. 150 mm︱
          Quckwood ROV 2600 vertikale Zwischenschliffmaschine ------------------------------------------------------------------------------- Beidseitiger Lackzwischenschliff von Fensterrahmen, Fensterflügeln und flachen profilierten Haustüren, Möbelteilen am Hängeförderer. - Ruhige Schleifwirkung auf der Oberfläche durch Einsatz von 16 Spindeln pro Schleifseite. - Klemmvorschub für den sicheren Transport der Werkstücke durch die Maschine. - Zentrale Steuerung mit Übernahme- und Übergabeschnittstellen zu anderen Maschinen. - Bürstenplatten für die Stabilisierung der Werkstücke während des Durchlaufs in der Maschine. - Geringerer Platzbedarf durch 2 spiegelbildlich aufgestellte Maschinenhälften. - Hohe Werkzeugstandzeit. Angebot auf Anfrage! Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF! (techn. Angaben laut Hersteller - ohne Gewähr!)
            Number of sanding units 32 St.
            sanding width 2600 mm
            Sanding height max. 150 mm
            Description :
            Quckwood ROV 2600 vertikale Zwischenschliffmaschine
            -------------------------------------------------------------------------------

            Beidseitiger Lackzwischenschliff von Fensterrahmen, Fensterflügeln und flachen profilierten Haustüren,
            Möbelteilen am Hängeförderer.

            - Ruhige Schleifwirkung auf der Oberfläche durch Einsatz von 16 Spindeln pro Schleifseite.
            - Klemmvorschub für den sicheren Transport der Werkstücke durch die Maschine.
            - Zentrale Steuerung mit Übernahme- und Übergabeschnittstellen zu anderen Maschinen.
            - Bürstenplatten für die Stabilisierung der Werkstücke während des Durchlaufs in der Maschine.
            - Geringerer Platzbedarf durch 2 spiegelbildlich aufgestellte Maschinenhälften.
            - Hohe Werkzeugstandzeit.

            Angebot auf Anfrage!
            Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF!
            (techn. Angaben laut Hersteller - ohne Gewähr!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER MiniSpin N


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6006 · Sanding machine

          LÖWER - MiniSpin N - - neu -

          Technical details
          Number of sanding units 1 st.︱sanding width 150 mm︱Sanding height max. 150 mm︱
          Loewer edge finishing machine MiniSpin N Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush <300 mm Frequency converter for stepless adjustment of the Spindle speed 200-800 rpm Table size 400 x 800 mm two directions of rotation selectable Operating voltage 110/240 V 50/60 Hz Exhaust connection D = 100 mm Weight 100 kg including grooved body D = 180, L = 150 placement with SmartFlex grinding blades CE - execution (technical details according to manufacturer - without guarantee!)
            Number of sanding units 1 st.
            sanding width 150 mm
            Sanding height max. 150 mm
            Description :
            Loewer edge finishing machine MiniSpin N

            Machines for finishing and fine sanding of
            Edges and profiles with a grinding spindle
            horizontal or vertical.

            Motor 0,75 KW

            Spindle in vertical position for machining edges

            Pivoted spindle in horizontal position, laterally
            etc. for processing longer profile bars or
            Conjunction with a combined grinding head for grinding
            of edges with a grinding disc blades

            Grinding head swiveling + / - 20 ° for editing
            oblique lines

            Working height / width 150 mm

            max. Diameter roller / brush <300 mm

            Frequency converter for stepless adjustment of the
            Spindle speed 200-800 rpm

            Table size 400 x 800 mm

            two directions of rotation selectable

            Operating voltage 110/240 V 50/60 Hz

            Exhaust connection D = 100 mm

            Weight 100 kg

            including grooved body D = 180, L = 150 placement
            with SmartFlex grinding blades

            CE - execution

            (technical details according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER HBS 402


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6246 · Sanding machine

          LÖWER - HBS 402 - - neu -

          Technical details
          Number of sanding units 2 st.︱sanding width 390 mm︱Sanding height max. 390 mm︱
          LÖWER BeamSander HBS 402 -------------------------------- Single-sided belt sander for sanding beams, Glued beams and other bar-shaped workpieces Wood with two sanding units from above. - constant working height enables the use of Roller conveyors in front of and behind the machine - heavy version with cast table - Conveyor belt feed with heavy pressure rollers - Calibration unit with steel roller - Fine grinding unit with fixed calibration sanding shoe - Working width 390mm - Workpiece thickness 4mm - 390mm 1. Grinding unit (calibration) - heavy steel roller with 200mm diameter - stable roller bearing - pneumatically controlled sanding belt oscillation - Sanding belt dimensions 400x1800mm - Drive motor 7.5 kW - Chip removal depending on the belt grain size up to 2mm 2. Grinding unit (fine grinding) - Calibration sanding shoe CERMET coated wear and maintenance free - pneumatically controlled sanding belt oscillation - Sanding belt dimensions 400x1800mm - Drive motor 7.5 kW - Electric motorized height adjustment of both grinding units with three-phase motor 0.37 kW including digital display - continuous workpiece feed using a geared motor and Frequency converter 4-20 m/min - Workpiece thickness scanning via contact roller - Inlet contact with EMERGENCY STOP interruption - Suction nozzle with connection diameter 2 x 150mm - Length x width x height (mm): 1400x1200x2200 - Weight: 1000kg - Voltage 400 volts, 50Hz, 3P, air connection 6 bar dust tested, CE version --------------------------------- Price of the above machine on request! --------------------------------- Special accessories with additional costs: Feed reversal including pneumatically guided conveyor belt and pneumatic excavation of the units during return Heavy roller conveyor HBS 500mm width, 2m long Ball bearing rollers diameter 60mm, steel tube galvanized with spring axle 12mm, load capacity per roller 80kg, Roll pitch 250mm, roll width 500mm, height adjustable Support feet per meter of length, track height 850mm +/- 60mm Roll cover according to HBG (required for machine with automatic feed) --------------------------------- Prices of the above-mentioned special accessories on request! --------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 2 st.
            sanding width 390 mm
            Sanding height max. 390 mm
            Description :
            LÖWER BeamSander HBS 402
            --------------------------------
            Single-sided belt sander for sanding beams,
            Glued beams and other bar-shaped workpieces
            Wood with two sanding units from above.
            - constant working height enables the use of
            Roller conveyors in front of and behind the machine
            - heavy version with cast table
            - Conveyor belt feed with heavy pressure rollers
            - Calibration unit with steel roller
            - Fine grinding unit with fixed calibration sanding shoe
            - Working width 390mm
            - Workpiece thickness 4mm - 390mm
            1. Grinding unit (calibration)
            - heavy steel roller with 200mm diameter
            - stable roller bearing
            - pneumatically controlled sanding belt oscillation
            - Sanding belt dimensions 400x1800mm
            - Drive motor 7.5 kW
            - Chip removal depending on the belt grain size up to 2mm
            2. Grinding unit (fine grinding)
            - Calibration sanding shoe CERMET coated
            wear and maintenance free
            - pneumatically controlled sanding belt oscillation
            - Sanding belt dimensions 400x1800mm
            - Drive motor 7.5 kW
            - Electric motorized height adjustment of both grinding units
            with three-phase motor 0.37 kW including digital display
            - continuous workpiece feed using a geared motor and
            Frequency converter 4-20 m/min
            - Workpiece thickness scanning via contact roller
            - Inlet contact with EMERGENCY STOP interruption
            - Suction nozzle with connection diameter 2 x 150mm
            - Length x width x height (mm): 1400x1200x2200
            - Weight: 1000kg
            - Voltage 400 volts, 50Hz, 3P, air connection 6 bar
            dust tested, CE version
            ---------------------------------
            Price of the above machine on request!
            ---------------------------------
            Special accessories with additional costs:

            Feed reversal including pneumatically guided conveyor belt
            and pneumatic excavation of the units during return

            Heavy roller conveyor HBS 500mm width, 2m long
            Ball bearing rollers diameter 60mm, steel tube
            galvanized with spring axle 12mm, load capacity per roller 80kg,
            Roll pitch 250mm, roll width 500mm, height adjustable
            Support feet per meter of length, track height 850mm +/- 60mm
            Roll cover according to HBG (required for machine with
            automatic feed)
            ---------------------------------
            Prices of the above-mentioned special accessories on request!
            ---------------------------------

            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine MB Roba Twin Flat  -Video-


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5343 · Sanding machine

          MB - Roba Twin Flat -Video- - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 100,150 mm︱Sanding height max. ,
            Number of sanding units 2 St.
            sanding width 100,150 mm
            Sanding height max. ,


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5580 · Sanding machine

          LÖWER - DSM 2000 - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 190 mm︱Sanding height max. 2-180 mm︱
          LÖWER double-sided grinding machine DSM 2000 --------------------------------- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Forced pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the sanding rollers Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom using a precision threaded spindle Dimension display via scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinders with constant clamping pressure - Sanding belt change with pneumatic belt relaxation in seconds - Adjustment of the sanding belt run when changing the belt - electro-pneumatic compressed air monitoring - Run-in protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and non-stick conveyor belts over heavy, 1000mm long cast tables with a finely planed surface and Spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - automatic workpiece thickness scanning (no previous measurement necessary) - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Grinding thickness: 2-180mm - two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11 and 16 m/min. - automatic height adjustment: 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle: 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height: 850mm - Length: 2105mm - Length with control panel 2490mm - Width: 880mm - Height: 1910mm - Weight: approx. 1500 kg - Operating voltage: 400 volts, 50 Hz, 3P - CE version -------------------------------------------------- ---------------------- Basic price of the machine on request! -------------------------------------------------- ---------------------- Special accessories with surcharge: continuous feed 4-20 m/min. for speed adjustment to the previous machine Price on request Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Price on request Sanding belt blowout - via nozzles directly on the radii of the tension rollers inside arranged in the suction system and can be switched on separately Price on request Lateral displacement of the entire machine - adjustable 50-100mm oscillating for more even Utilization of sanding belts, finishing tools and Transport system, geared motor 0.37kW (not available in conjunction with disc/softdisc unit) Price on request Transport freewheel device - when linked with little distance to the previous machine Price on request External start impulse of the machine - via a button including control option via external PLC control (when linked in a production line) Price on request DUPLO control - additional control panel for attachment to a upstream machine with the following functions: - Start button - Emergency stop switch - Height adjustment up, down and 1/10 down - Digital strength display - shielded special cable, (max. 20m) Price on request -------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 2 St.
            sanding width 190 mm
            Sanding height max. 2-180 mm
            Description :
            LÖWER double-sided grinding machine DSM 2000
            ---------------------------------
            Double-sided single wood sander for sanding
            Solid wood such as window wood etc. Stable top quality
            Guide with long casting tables, brushing and finishing equipment
            and conveyor belt feed. Suitable for high continuous loads
            even with higher chip removals.

            - Staggered sanding and finishing units at the top and bottom
            - Directly driven rubberized grinding rollers for slip-free power transmission
            - Combined grinding via roller and shoe for high chip removal at the same time
            flat intervention zone
            - Maintenance and wear-free CERMET-coated sanding shoes with very
            good thermal conductivity and absolute
            Dimensional accuracy
            - External cooling of the grinding zones for cooler grinding and higher grinding
            Grinding belt service life
            - Forced pneumatically controlled sanding belt oscillation
            - effective sanding dust extraction directly on the sanding rollers
            Airborne dust extraction on the tension rollers
            - Integrated brushing and finishing device with large sanding dust extraction
            - Motorized grinding thickness adjustment via precision threaded spindles and
            large-sized linear ball
            bearing sets on hardened and ground precision
            shafts with dust and dirt protection
            - Adjustment of the chip removal at the bottom using a precision threaded
            spindle
            Dimension display via scale ring (resolution 0.1mm)
            - Sanding belt tension via pneumatic cylinders with constant clamping pressure
            - Sanding belt change with pneumatic belt relaxation in seconds
            - Adjustment of the sanding belt run when changing the belt
            - electro-pneumatic compressed air monitoring
            - Run-in protection via contact roller for workpieces that are too thick
            - Workpiece transport via calibrated non-slip and non-stick conveyor belts
            over heavy, 1000mm long cast tables with a finely planed surface and
            Spring-loaded pressure rollers with fine adjustment
            - Cardan shaft drive for smooth and even workpiece transport
            - Feed gear motor with three different feed speeds
            for quick adaptation to different types of wood
            - all motors electrically protected
            - Ergonomically arranged controls on the workpiece inlet side
            - automatic workpiece thickness scanning (no previous measurement necessary)
            - Digital thickness display (resolution 0.1mm) with modern magnetic tape system

            Technical data:
            - Sanding belt speed: 22 m/s
            - Sanding belt length: 1800mm
            - Sanding belt width: 200mm
            - Working width: 190mm
            - Grinding thickness: 2-180mm
            - two brake motors for drive: 5.5 kW
            - Feed motor: 1.0 kW
            - Feed speed: 6, 11 and 16 m/min.
            - automatic height adjustment: 0.37 kW
            - two brush units
            with fiber brushes D 120 x 200mm at 0.37 kW
            - Suction nozzle: 2 x 120mm and 2 x 150mm
            - Pneumatic connection 6 bar
            - Working height: 850mm
            - Length: 2105mm
            - Length with control panel 2490mm
            - Width: 880mm
            - Height: 1910mm
            - Weight: approx. 1500 kg
            - Operating voltage: 400 volts, 50 Hz, 3P
            - CE version
            -------------------------------------------------- ----------------------
            Basic price of the machine on request!
            -------------------------------------------------- ----------------------

            Special accessories with surcharge:

            continuous feed 4-20 m/min.
            for speed adjustment to the previous machine
            Price on request

            Workpiece blow-off
            - using nozzles from above and below at the machine outlet
            arranged, pneumatically controlled
            Price on request

            Sanding belt blowout
            - via nozzles directly on the radii of the tension rollers inside
            arranged in the suction system and can be switched on separately
            Price on request

            Lateral displacement of the entire machine
            - adjustable 50-100mm oscillating for more even
            Utilization of sanding belts, finishing tools and
            Transport system, geared motor 0.37kW
            (not available in conjunction with disc/softdisc unit)
            Price on request

            Transport freewheel device
            - when linked with little distance to the previous machine
            Price on request

            External start impulse of the machine
            - via a button including control option via external
            PLC control (when linked in a production line)
            Price on request

            DUPLO control
            - additional control panel for attachment to a
            upstream machine with the following functions:
            - Start button
            - Emergency stop switch
            - Height adjustment up, down and 1/10 down
            - Digital strength display
            - shielded special cable, (max. 20m)
            Price on request
            --------------------------------
            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 2004


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5088 · Sanding machine

          LÖWER - DSM 2004 - - neu -

          Technical details
          Number of sanding units 4 St.︱sanding width 190 mm︱Sanding height max. 180 mm︱
          LÖWER-DoubleSander Solid DSM 2004 ---------------------------------- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version --------------------------------- Price of the above machine on request! --------------------------------- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two grinding flap discs with a diameter of 200mm (max. grinding width 180mm) - Adjustable laterally and in delivery - including frequency converter for stepless speed control instead of the standard brushing and finishing facility Soft disc aggregate a soft disc each at the top and bottom for the intensive defibering cross-section with fine grain size - Discs with a diameter of 200mm - Manually adjustable laterally and in delivery - sensor-controlled automatic immersion - Continuous speed control via frequency converter - Boundary ruler min. workpiece thickness 20mm instead of the standard brushing and finishing facility Roller finish package - two grooved roller base bodies with grinding lamellas equipped - Total diameter approx. 180mm - including frequency converter for stepless Speed ??control instead of the standard brushing and finishing facility Lateral displacement of the entire machine - adjustable 50-100mm oscillating for more even Utilization of sanding belts, finishing tools and Transport system, geared motor 0.37kW (not available in conjunction with disc/softdisc unit) Transport freewheel device - when linked with little distance to the previous machine External start impulse of the machine via a button Control option via an external PLC control (at chaining in production line) DUPLO control - additional control panel for attachment to a upstream machine with the following functions: - Start button - Emergency stop switch - Height adjustment up, down and 1/10 down - Digital strength display - shielded special cable, (max. 20m) PLC Power Panel package for DSM instead of standard contactor control - B&R PLC touch panel for operation and display - Parameters that can be set using the touch panel are workpiece thickness, Grinding units on/off, feed on/off, Feed speed, belt blow-off on/off (if available), disc motor (if available) - Saving the parameters as machine programs - Ethernet interface (UDP protocol) - Manual/automatic operation selector switch Road connection, preparation for master computer control Automatic workpiece thickness scanning (no prior measurement necessary) Set of SmartFlex sanding flaps for DSM with sanding flap discs consisting of: 60 strips M 35 / 50 Set of SmartFlex sanding flaps for DSM with flap rollers consisting of: 48 strips M 55 / 200 Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ---------------------------------- Prices of the above-mentioned special accessories on request! ---------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 4 St.
            sanding width 190 mm
            Sanding height max. 180 mm
            Description :
            LÖWER-DoubleSander Solid DSM 2004
            ----------------------------------
            Double-sided four-belt single wood sander for
            Sanding solid wood such as window frames etc.
            Highly stable top design with innovative details. Suitable
            for high continuous loads even with higher chip removals.
            - sanding units arranged one after the other for pre-grinding,
            Fine sanding and finishing sanding, each from above and below
            1. Belt sanding unit with heavy steel roller
            2. Belt sanding unit with rubberized roller and shoe
            3. Finishing unit with fiber brush
            - Directly driven grinding rollers for slip-free
            Power transmission
            - maintenance and wear-free CERMET-coated grinding wheels
            shoes with very good thermal conductivity and absolute
            Dimensional accuracy
            - External cooling of the grinding zones for cooler grinding
            and longer sanding belt service life
            - force-guided pneumatically controlled sanding belt
            oscillation
            - effective sanding dust extraction directly on the
            Grinding rollers
            - Airborne dust extraction on the tension rollers
            - Integrated brushing and finishing device with large
            Grinding dust extraction
            - motorized grinding thickness adjustment via precision
            threaded spindles and large-sized linear ball screws
            bearing sets on hardened and ground precision
            shafts with dust and dirt protection
            - Adjustment of the chip removal at the bottom via precision
            Threaded spindle with dimension display via scale ring
            (Resolution 0.1mm)
            - Sanding belt tension via pneumatic cylinder
            constant clamping pressure
            - Sanding belt change with pneumatic belt relaxation
            Within seconds
            - Adjustment option for the sanding belt run
            Band change
            - electro-pneumatic compressed air monitoring
            - Anti-running protection via contact roller if it is too thick
            workpieces
            - Workpiece transport via calibrated non-slip and non-stick
            fixed conveyor belts over heavy, cast tables
            Finely planed surface and spring-loaded pressure rollers
            with fine adjustment
            - Cardan shaft drive for smooth and consistent
            Workpiece transport
            - Feed gear motor with stepless speed
            4-20 m/min
            - all motors electrically protected
            - ergonomically arranged controls
            - digital thickness display (resolution 0.1mm) with modern
            Magnetic tape system
            Technical data:
            - Sanding belt speed 22 m/s
            - Sanding belt length 1800mm
            - Sanding belt width 200mm

            - Working width 190mm
            - Grinding thickness 2-180mm
            - four brake motors for 5.5 kW drive
            - Feed motor 1.5 kW
            - Feed speed 4-20 m/min.
            - automatic height adjustment 0.37 kW
            - two brush units
            with fiber brushes D 120 x 200mm at 0.37 kW
            - Suction nozzle 2 x 180mm
            2 x 120mm
            - Extraction air speed 20 m/s
            - Pneumatic connection 6 bar
            - Working height 870mm
            - Length (with soft disc 2740mm) 2600mm
            - Length with control panel (with soft disc 3035mm) 2985mm
            - Width 880mm
            - Height 1910mm
            - Weight approx. 3300 kg
            - Operating voltage 400 volts, 50 Hz, 3P
            - CE version
            ---------------------------------
            Price of the above machine on request!
            ---------------------------------

            Special accessories with additional charge:

            Workpiece blow-off
            - using nozzles from above and below at the machine outlet
            arranged, pneumatically controlled

            4-belt sanding belt blowout
            via nozzles directly on the radii of the tension rollers inside
            the suction arranged, timer controlled on/off 5 seconds each,
            can be switched on separately

            Disc unit for defibering
            - two grinding flap discs with a diameter of 200mm
            (max. grinding width 180mm)
            - Adjustable laterally and in delivery
            - including frequency converter for stepless speed control
            instead of the standard brushing and finishing facility

            Soft disc aggregate
            a soft disc each at the top and bottom for the
            intensive defibering cross-section with fine grain size
            - Discs with a diameter of 200mm
            - Manually adjustable laterally and in delivery
            - sensor-controlled automatic immersion
            - Continuous speed control via frequency converter
            - Boundary ruler min. workpiece thickness 20mm
            instead of the standard brushing and finishing facility

            Roller finish package
            - two grooved roller base bodies with grinding lamellas
            equipped
            - Total diameter approx. 180mm
            - including frequency converter for stepless
            Speed ??control
            instead of the standard brushing and finishing facility

            Lateral displacement of the entire machine
            - adjustable 50-100mm oscillating for more even
            Utilization of sanding belts, finishing tools and
            Transport system, geared motor 0.37kW
            (not available in conjunction with disc/softdisc unit)

            Transport freewheel device
            - when linked with little distance to the previous machine

            External start impulse of the machine via a button
            Control option via an external PLC control (at
            chaining in production line)

            DUPLO control
            - additional control panel for attachment to a
            upstream machine with the following functions:
            - Start button
            - Emergency stop switch
            - Height adjustment up, down and 1/10 down
            - Digital strength display
            - shielded special cable, (max. 20m)

            PLC Power Panel package for DSM
            instead of standard contactor control
            - B&R PLC touch panel for operation and display
            - Parameters that can be set using the touch panel are workpiece thickness,
            Grinding units on/off, feed on/off,
            Feed speed, belt blow-off on/off (if
            available), disc motor (if available)
            - Saving the parameters as machine programs
            - Ethernet interface (UDP protocol)
            - Manual/automatic operation selector switch

            Road connection, preparation for master computer control

            Automatic workpiece thickness scanning
            (no prior measurement necessary)

            Set of SmartFlex sanding flaps for DSM with sanding flap discs
            consisting of:
            60 strips M 35 / 50

            Set of SmartFlex sanding flaps for DSM with flap rollers
            consisting of:
            48 strips M 55 / 200

            Sandpaper disc VB for soft disc
            D=200mm grit 280
            with velor backing (Velcro), pack of 100.
            ----------------------------------
            Prices of the above-mentioned special accessories on request!
            ----------------------------------

            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DoubleMaster DSM 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6199 · Sanding machine

          LÖWER - DoubleMaster DSM 2000 - - neu -

          Technical details
          Number of sanding units 4 St︱sanding width 190 mm︱Sanding height max. 2 - 180 mm︱
          LÖWER - DoubleMaster DSM 2000 DB ------------------------------------------------- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version -------------------------------- Price of the above machine on request! -------------------------------- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Soft disc unit instead of grinding flap disc unit top and bottom for more aggressive cross and fine sanding including sensor-controlled automatic immersion Automatic workpiece thickness scanning no prior measurement necessary) Set of SmartFlex sanding flaps for DSM with flap disc consisting of: 60 strips M 35 / 50 Set of SmartFlex sanding flaps for DSM with flap roller consisting of: 48 strips M 55 / 200 Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. Prices of the above-mentioned special accessories on request! -------------------------------- (technical data according to manufacturer - no guarantee!)
            Number of sanding units 4 St
            sanding width 190 mm
            Sanding height max. 2 - 180 mm
            Description :
            LÖWER - DoubleMaster DSM 2000 DB
            -------------------------------------------------
            Double-sided single wood sander with additional
            Transverse brush sanding unit (discs) and
            Longitudinal brush sanding unit (roller) for sanding
            Solid wood such as B. window wood etc.
            Stable top version with long cast tables and
            Conveyor belt feed. Suitable for high continuous loads
            even with higher chip removals.
            1. Belt sanding unit with CERMET sanding shoe pre-sanding
            2. Disc aggregate cross grinding for defibering
            3. Rolling aggregate longitudinal grinding for directional finish
            Direction of growth
            - Staggered sanding and finishing units at the top
            and below
            - directly driven rubberized sanding rollers for slip-proof
            free power transmission
            - Combined grinding via roller and shoe for high chip removal
            with a flat intervention zone at the same time
            - maintenance and wear-free CERMET-coated grinding wheels
            shoes with very good thermal conductivity and absolute
            Dimensional accuracy
            - External cooling of the grinding zones for cooler grinding
            and longer sanding belt service life
            - force-guided pneumatically controlled sanding belt
            oscillation
            - effective sanding dust extraction directly on the
            Grinding rollers
            - Airborne dust extraction on the tension rollers
            - integrated brush grinding device (transverse and
            Longitudinal) with sanding dust extraction
            - motorized grinding thickness adjustment via precision
            threaded spindles and large-sized linear ball screws
            bearing sets on hardened and ground precision
            shafts with dust and dirt protection
            - Adjustment of the chip removal at the bottom via precision
            Threaded spindle with dimension display via scale ring
            (Resolution 0.1mm)
            - Sanding belt tension via pneumatic cylinder
            constant clamping pressure
            - Sanding belt change with pneumatic belt relaxation
            Within seconds
            - Adjustment option for the sanding belt run
            Band change
            - electro-pneumatic compressed air monitoring
            - Anti-running protection via contact roller if it is too thick
            workpieces
            - Workpiece transport via calibrated non-slip and non-stick
            fixed conveyor belts over heavy, 1000mm long cast iron
            tables with a finely planed surface and spring-loaded
            Pressure rollers with fine adjustment
            - Cardan shaft drive for smooth and consistent
            Workpiece transport
            - Feed gear motor infinitely variable
            for quick adaptation to different types of wood
            - all motors electrically protected
            - ergonomically arranged controls on the
            Workpiece inlet side
            - digital thickness display (resolution 0.1mm) with modern
            Magnetic tape system

            Technical data:
            - Sanding belt speed 22 m/s
            - Sanding belt length 1800mm
            - Sanding belt width 200mm
            - Working width 190mm
            - Grinding thickness 2-180mm
            - two brake motors for 5.5 kW drive
            - Feed motor 1.0 kW
            - Feed speed 4-20m/min.
            - automatic height adjustment 0.37 kW
            - Brush sanding units
            Disc D=max. 200mm
            Roller D=max. 270mm
            - Suction nozzles 2 x 120mm and 2 x 180mm
            - Pneumatic connection 6 bar
            - Working height 870mm

            External dimensions:
            - Length 2600mm
            - Length with wheels 2985mm
            - Width 880mm
            - Height 1910mm
            - Weight approx. 1500 kg
            - Operating voltage 400 volts, 50 Hz, 3P
            - CE version
            --------------------------------
            Price of the above machine on request!
            --------------------------------

            Special accessories with additional charge:
            Workpiece blow-off
            - using nozzles from above and below at the machine outlet
            arranged, pneumatically controlled

            Sanding belt blowout
            via nozzles directly on the radii of the tension rollers inside
            the suction arranged, timer controlled on/off 5 seconds each,
            can be switched on separately

            Soft disc unit instead of grinding flap disc unit
            top and bottom for more aggressive cross and fine sanding
            including sensor-controlled automatic immersion

            Automatic workpiece thickness scanning
            no prior measurement necessary)

            Set of SmartFlex sanding flaps for DSM with flap disc
            consisting of:
            60 strips M 35 / 50

            Set of SmartFlex sanding flaps for DSM with flap roller
            consisting of:
            48 strips M 55 / 200

            Sandpaper disc VB for soft disc
            D=200mm grit 280
            with velor backing (Velcro), pack of 100.

            Prices of the above-mentioned special accessories on request!
            --------------------------------

            (technical data according to manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 3000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6155 · Sanding machine

          LÖWER - DSM 3000 - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 290 mm︱Sanding height max. 180 mm︱
          LÖWER-DoubleSander Solid DSM 3000 ---------------------------------- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version --------------------------------- Price of the above machine on request! --------------------------------- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two grinding flap discs with 180mm diameter (max. grinding width 180mm) - Adjustable laterally and in delivery - including frequency converter for stepless speed control instead of the standard brushing and finishing facility Roller finish package 300 - two grooved roller base bodies equipped with grinding flaps - Total diameter approx. 180mm - including frequency converter for stepless speed control instead of the standard brushing and finishing facility Lateral displacement of the entire machine - adjustable 50-100mm oscillating for more even Utilization of sanding belts, finishing tools and Transport system, geared motor 0.37kW (not available in conjunction with disc/softdisc unit) Transport freewheel device - when linked with little distance to the previous machine External start impulse of the machine - via a button including control option via external PLC control (when linked in a production line) DUPLO control - additional control panel for attachment to a upstream machine with the following functions: - Start button - Emergency stop switch - Height adjustment up, down and 1/10 down - Digital strength display - shielded special cable, (max. 20m) Suction device for DSM conveyor belts against tables for grinding particularly thin workpieces from 1 mm, including 80mm connection piece for suction hose Automatic workpiece thickness scanning no prior measurement necessary) Set of SmartFlex sanding flaps for DSM with flap discs consisting of: 60 strips M 35 / 50 Set of SmartFlex sanding flaps for DSM with flap roller consisting of: 48 strips M 55 / 300 -------------------------------- Price of the above-mentioned special accessories on request! -------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 2 St.
            sanding width 290 mm
            Sanding height max. 180 mm
            Description :
            LÖWER-DoubleSander Solid DSM 3000
            ----------------------------------
            Two-sided single wood sander for sanding
            Solid wood such as window wood etc. Stable
            Top version with long casting tables, brushing and finishing
            device and conveyor belt feed. Suitable for high
            Permanent load even with higher chip removals.
            - Staggered sanding and finishing units at the top
            and below
            - directly driven rubberized sanding rollers for slip-proof
            free power transmission
            - Combined grinding via roller and shoe for high chip removal
            with a flat intervention zone at the same time
            - maintenance and wear-free CERMET-coated grinding wheels
            shoes with very good thermal conductivity and absolute
            Dimensional accuracy
            - External cooling of the grinding zones for cooler grinding
            and longer sanding belt service life
            - force-guided pneumatically controlled sanding belt
            oscillation
            - effective sanding dust extraction directly on the
            Grinding rollers
            - Airborne dust extraction on the tension rollers
            - Integrated brushing and finishing device with large
            Grinding dust extraction
            - motorized grinding thickness adjustment via precision
            threaded spindles and large-sized linear ball screws
            bearing sets on hardened and ground precision
            shafts with dust and dirt protection
            - Adjustment of the chip removal at the bottom via precision
            Threaded spindle with dimension display via scale ring
            (Resolution 0.1mm)
            - Sanding belt tension via pneumatic cylinder
            constant clamping pressure
            - Sanding belt change with pneumatic belt relaxation
            Within seconds
            - Adjustment option for the sanding belt run
            Band change
            - electro-pneumatic compressed air monitoring
            - Anti-running protection via contact roller if it is too thick
            workpieces
            - Workpiece transport via calibrated non-slip and non-stick
            fixed conveyor belts over heavy, 1000mm long cast iron
            tables with a finely planed surface and spring-loaded
            Pressure rollers with fine adjustment
            - Cardan shaft drive for smooth and consistent
            Workpiece transport
            - Feed gear motor infinitely variable
            for quick adaptation to different types of wood
            - all motors electrically protected
            - Ergonomically arranged controls on the workpiece inlet side
            - digital thickness display (resolution 0.1mm) with modern
            Magnetic tape system
            Technical data:
            - Sanding belt speed 22 m/s
            - Sanding belt length 1800mm
            - Sanding belt width 300mm

            - Working width 290mm
            - Grinding thickness 2-180mm
            - two brake motors for 7.5 kW drive
            - Feed motor 1.0 kW
            - Feed speed 4-20 m/min.
            - automatic height adjustment 0.37 kW
            - two brush units of 0.37 kW each
            with fiber brushes D 120 x 300mm
            - Suction nozzles 2 x 120mm and 2 x 150mm
            - Pneumatic connection 6 bar
            - Working height 850mm
            - Length 2105mm
            - Length with control panel 2490mm
            - Width 980mm
            - Height 1910mm
            - Weight approx. 1650 kg
            - Operating voltage 400 volts, 50 Hz, 3P
            - CE version
            ---------------------------------
            Price of the above machine on request!
            ---------------------------------
            Special accessories with additional costs:

            Workpiece blow-off
            - using nozzles from above and below at the machine outlet
            arranged, pneumatically controlled

            Sanding belt blowout
            via nozzles directly on the radii of the tension rollers inside
            the suction arranged, timer controlled on/off 5 seconds each,
            can be switched on separately

            Disc unit for defibering
            - two grinding flap discs with 180mm diameter
            (max. grinding width 180mm)
            - Adjustable laterally and in delivery
            - including frequency converter for stepless speed control
            instead of the standard brushing and finishing facility

            Roller finish package 300
            - two grooved roller base bodies equipped with grinding flaps
            - Total diameter approx. 180mm
            - including frequency converter for stepless speed control
            instead of the standard brushing and finishing facility

            Lateral displacement of the entire machine
            - adjustable 50-100mm oscillating for more even
            Utilization of sanding belts, finishing tools and
            Transport system, geared motor 0.37kW
            (not available in conjunction with disc/softdisc unit)

            Transport freewheel device
            - when linked with little distance to the previous machine

            External start impulse of the machine
            - via a button including control option via external
            PLC control (when linked in a production line)

            DUPLO control
            - additional control panel for attachment to a
            upstream machine with the following functions:
            - Start button
            - Emergency stop switch
            - Height adjustment up, down and 1/10 down
            - Digital strength display
            - shielded special cable, (max. 20m)

            Suction device for DSM conveyor belts
            against tables for grinding particularly thin workpieces
            from 1 mm, including 80mm connection piece for suction hose

            Automatic workpiece thickness scanning
            no prior measurement necessary)

            Set of SmartFlex sanding flaps for DSM with flap discs
            consisting of:
            60 strips M 35 / 50

            Set of SmartFlex sanding flaps for DSM with flap roller
            consisting of:
            48 strips M 55 / 300
            --------------------------------
            Price of the above-mentioned special accessories on request!
            --------------------------------
            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER Leistomat SD Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6368 · Sanding machine

          LÖWER - Leistomat SD Video - - neu -

          Technical details
          Number of sanding units 8 st.︱sanding width 180 (260) mm︱Sanding height max. 160 mm︱Dimensions (L/W/H) 3065x1600x1900 mm︱weight of the machine ca. 1500 kg︱
          LÖWER Leistomat SD --------------------------------- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version --------------------------------- Price of the above machine on request! --------------------------------- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ---------------------------------- Price of the above-mentioned special accessories on request! ---------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 8 st.
            sanding width 180 (260) mm
            Sanding height max. 160 mm
            Dimensions (L/W/H) 3065x1600x1900 mm
            weight of the machine ca. 1500 kg
            Description :
            LÖWER Leistomat SD
            ---------------------------------
            Automatic fine grinding machine for wood grinding (smoothing, defibering and
            Edge breaking) or intermediate sanding of profiled window bars. With soft disc
            Technology for the visible surfaces as well as automatically safe profile and
            Width adjustment.
            - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm
            1 softisc unit Ø=200mm above 0.75kW,
            1 slat roller unit L=200mm top 0.75kW,
            1 soft disc unit Ø=200mm bottom 0.75kW,
            1 slat roller unit L=200mm bottom 0.75kW,
            2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm
            - Linear guidance of all grinding units
            Linear ball bearing sets on hardened shafts
            - time-controlled immersion of all lamella roller units
            directly above the incoming workpiece edges. By the
            It is possible to immerse the aggregates deeper into the profiles
            to be able to deliver.
            - Motorized workpiece thickness adjustment of the machine
            - variable grinding flap speed via frequency converter
            for adjusting the grinding intensity using frequency converters
            (separate for discs, surface rollers and side rollers)
            - Disc aggregates as soft discs with Velcro fastener for
            Grinding wheels (wood pulp)
            - Feed via three lower and one upper conveyor belts and
            Spring-loaded pressure rollers with infinitely variable speed 4-15m/min
            - Parameters that can be set using the touch panel are workpiece thickness,
            Workpiece width (left side units individually), immersion depth
            Side units, spindle speed, feed speed
            - Saving the parameters as machine programs in program mode
            - Working in automatic mode with non-contact
            Workpiece width detection and profile detection as well as automatic
            Adjustment of the sanding units to the workpiece width and the
            Profile shape (workpiece height is set in advance)
            - pneumatically clocked driven feed roller, automatic
            Clamping of the workpiece and feeding in after unit adjustment
            - Red/green indicator lights to indicate operational readiness
            - shortest workpiece length 380mm
            - Transport belt width 200mm
            - max. workpiece width 180mm (260mm in the envelope process)
            - Workpiece height 12-160mm
            - Suction connection 4 x 100mm and 2x80mm diameter
            - Sensor-controlled tool blow-off directly on the discs
            - Length (case) x width x height (mm): 3065x 1600 x 1900
            Complete length: 4365mm (including roller conveyor with integrated
            workpiece width detection)
            - Weight: 1500kg
            - Operating voltage 400V, 50Hz, 3P, air connection 6 bar
            - CE version
            ---------------------------------
            Price of the above machine on request!
            ---------------------------------
            Special accessories with additional costs:

            Set of replacement slats for Leistomat SD-200
            consisting of
            Area aggregates:
            30 strips EH45 / 200 - 7 (rolls)
            30 strips EH45 / 200 - 20 (rolls)
            Folding units:
            96 strips M55 / 120 - 4

            SmartFlex slat disc Ø200 solid
            with 30 grooves 50mm long

            Set of replacement slats for SmartFlex slat disc
            consisting of
            60 strip M35 / 50 K 180-7 p

            Sandpaper disc VB for soft disc
            D=200mm grit 220
            with velor backing (Velcro), pack of 100.

            Sandpaper disc VB for soft disc
            D=200mm grit 280
            with velor backing (Velcro), pack of 100.
            ----------------------------------
            Price of the above-mentioned special accessories on request!
            ----------------------------------

            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER LZ DBx2-200 Crossmaster


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5282 · Sanding machine

          LÖWER - LZ DBx2-200 Crossmaster - - neu -

          Technical details
          Number of sanding units 4 St.︱sanding width 200 mm︱Sanding height max. 150 mm︱
          LÖWER CrossMaster DBx2-200 -------------------------------- for the finish sanding and intermediate sanding of all strips Type with simultaneous processing from above and below - 1 disc sanding flap unit each from above and bottom, D= 200mm, 0.75 kW, - Continuous speed control of the disc units 200-600 rpm via frequency converter - 1 grinding flap roller each from above and below, D = 270mm, B=150mm, counter rotation, 0.75kW each, - Continuous speed control of the grinding spindles 200-1000 rpm, via frequency converter - Staggered arrangement of the sanding units, each at the top and bottom Below, grinding flap disc with subsequent grinding flap roller - Working width max. 200mm - Safe conveyor belt feed (top and bottom). spring-loaded pressure rollers, transport belt width 200mm - continuous feed 4-20m/min Geared motor 1.5 kW and frequency converter - motorized workpiece thickness adjustment 30-150mm above Geared motor including digital display - Separate adjustment option for the disc in height and lateral direction relative to the following roller, as well Separate delivery option for the rollers - Inlet contact with emergency stop interruption - complete machine encapsulation with suction nozzle 1 x 150mm - Operating voltage: 400 volts, 50 Hz, 3P - Length x width x height (mm): 1900x850x1800 - Weight: 600kg - CE version -------------------------------- Price of the above machine on request! -------------------------------- Special accessories with additional costs: Soft disc aggregates top and bottom for intensive cross-cutting and fine sanding including sensor-controlled automatic immersion instead Grinding flap discs Guide ruler for supporting profiled window bars in the machine, Ruler with support rollers throughout the entire machine mounted on the left side, precisely adjustable in height via a Handwheel with 1/10mm counter, can be moved sideways Clamping pieces against stops (in use/not in Use) Workpiece blow-off at the machine outlet Set of SmartFlex sanding flaps for CrossMaster DBx2-200 consisting of: 48 strips M 55 / 200 (rolls) 60 strips M 35 / 50 (discs) Set of SmartFlex sanding flaps for CrossMaster only for lamella roller consisting of: 48 strips M 55 / 200 Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. --------------------------------- Price of the above-mentioned special accessories on request! --------------------------------- (technical information according to the manufacturer - no guarantee!) All prices quoted are net. plus statutory VAT
            Number of sanding units 4 St.
            sanding width 200 mm
            Sanding height max. 150 mm
            Description :
            LÖWER CrossMaster DBx2-200
            --------------------------------
            for the finish sanding and intermediate sanding of all strips
            Type with simultaneous processing from above and below
            - 1 disc sanding flap unit each from above and
            bottom, D= 200mm, 0.75 kW,
            - Continuous speed control of the disc units
            200-600 rpm via frequency converter
            - 1 grinding flap roller each from above and below, D = 270mm,
            B=150mm, counter rotation, 0.75kW each,
            - Continuous speed control of the grinding spindles
            200-1000 rpm, via frequency converter
            - Staggered arrangement of the sanding units, each at the top and bottom
            Below, grinding flap disc with subsequent grinding flap roller
            - Working width max. 200mm
            - Safe conveyor belt feed (top and bottom).
            spring-loaded pressure rollers, transport belt width 200mm
            - continuous feed 4-20m/min
            Geared motor 1.5 kW and frequency converter
            - motorized workpiece thickness adjustment 30-150mm above
            Geared motor including digital display
            - Separate adjustment option for the disc in height and
            lateral direction relative to the following roller, as well
            Separate delivery option for the rollers
            - Inlet contact with emergency stop interruption
            - complete machine encapsulation with suction nozzle 1 x 150mm
            - Operating voltage: 400 volts, 50 Hz, 3P
            - Length x width x height (mm): 1900x850x1800
            - Weight: 600kg
            - CE version
            --------------------------------
            Price of the above machine on request!
            --------------------------------
            Special accessories with additional costs:

            Soft disc aggregates
            top and bottom for intensive cross-cutting and fine sanding
            including sensor-controlled automatic immersion instead
            Grinding flap discs

            Guide ruler
            for supporting profiled window bars in the machine,
            Ruler with support rollers throughout the entire machine
            mounted on the left side, precisely adjustable in height via a
            Handwheel with 1/10mm counter, can be moved sideways
            Clamping pieces against stops (in use/not in
            Use)

            Workpiece blow-off at the machine outlet

            Set of SmartFlex sanding flaps for CrossMaster DBx2-200
            consisting of:
            48 strips M 55 / 200 (rolls)
            60 strips M 35 / 50 (discs)

            Set of SmartFlex sanding flaps for CrossMaster
            only for lamella roller consisting of:
            48 strips M 55 / 200

            Sandpaper disc VB for soft disc
            D=200mm grit 280
            with velor backing (Velcro), pack of 100.
            ---------------------------------
            Price of the above-mentioned special accessories on request!
            ---------------------------------

            (technical information according to the manufacturer - no guarantee!)
            All prices quoted are net. plus statutory VAT




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine HESS Junior


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2731 · Sanding machine

          HESS - Junior - - gebraucht -

          Technical details
          Number of sanding units 2 st.︱sanding width 190 mm︱Sanding height max. 4-150 mm︱
          Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The large-sized drive drums guarantee the full transmission of the 5.5 kW drive power Grinding motors on the sanding belt. This results in the greatest chip removal possible. Automatic machine stop activation in the event of a belt break. Optical display on control panel. Sanding shoe for finish made of special material with optimal Heat dissipation and additional sliding coating. Easy to handle Pad change. Sanding belt tension over appropriately sized Compression springs. Sanding belt relaxation for belt changing using pneumatic Device for sensitive, distortion-free placement of new tapes. Upper Grinding unit and brush device (additional equipment) centrally motorized adjustable. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Tip-proof transport of profiled workpieces Calibrated conveyor belts with infinitely adjustable feed rate. Automatic machine stop triggering by wood thickness control device. Visual display of the control panel. Inlet table via fine-running, precise threaded spindle for lower Grinding chip removal can be adjusted manually using a scale (resolution 0.1 mm). The length Column table guide guarantees absolute parallel adjustment. The The flight circle is coordinated with the exit table by adjusting the height of the lower one Grinding unit via precise threaded spindle and scale display (resolution 0.1 mm) accomplished. Clear, user-friendly arrangement of all electrical functions and operating and display elements on the front of the machine: grinding unit below, Grinding unit on top, workpiece transport device, Grinding thickness adjustment, top/bottom brushing device, belt utilization, Operating display, fault display. All motors are against overload electrically protected. Technical data : -------------------------------- Sanding belt speed: 25 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 150 mm Shortest workpiece length: 280 mm Feed speed, continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection: 400 V., 3/N, 50 Hz. Pneumatic connection: R 3/8", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, min. 6 bar, max. 8 bar Exhaust air quantity: 2 x 2000 to 2500 m3/h 20 - 25 m/sec. Suction connection piece: 2 x 180 mm diameter, at the top of the machine housing External dimensions: without control cabinet 1750 mm width, 1850 mm height, 1000 mm depth with control cabinet 1960 mm wide, 1850 mm high, 1000 mm deep Working height: 835 mm in the range 4-20 mm only without a guide ruler Paint finish: RAL 7030 stone gray with RAL 1018 zinc yellow Additional equipment: 1 digital display for motor. Grinding thickness adjustment 1 facility for oscill. Abrasive belt utilization device for oscillating Utilization of sanding belts to increase the service life of the sanding belts and improve them of the surface finish through motor-driven sanding unit adjustment. Connected load: 0.12 kW, 380 V, 3/N, 50 Hz 1 brushing and finishing device, for better surface finish, integrated in the basic machine. Two special brush rollers 150 mm arranged one above the other Diameter in synchronization function for feed. Separate height adjustment Brush rollers on precise carriage guides for wear correction. 1 pneumatic workpiece release device after brushing and finishing Furnishings Included: 1 piece of undriven roller conveyor as an inlet 1 piece of undriven roller conveyor as an outlet (without feets), length approx. 3 m VIDEO not original shows machine of the same type (Technical data according to the manufacturer, no guarantee!)
            Number of sanding units 2 st.
            sanding width 190 mm
            Sanding height max. 4-150 mm
            Description :
            Hess Junior single wood sanding machine
            --------------------------------
            Machine in checking process at the moment!

            Basic structure:

            Stable, heavy welded construction made of thick-walled rectangular hollow
            profiles with additional, statically calculated reinforcements for optimal
            Vibration dampening.

            Staggered grinding units with large dimensions
            Belt drive drums for slip-free belt running. Two-point suction for direct
            and airborne dust extraction with integrated blow-off device. grinding units
            in heavy steel plate construction as the basis for vibration-damped,
            quiet tape running. All guides as a ball linear set on hardened and
            polished waves. Permanent precision thanks to dust and dirt protection
            the ball linear sets. Contact roller and sanding pad in a balanced ratio
            for sanding belt grain load. The large-sized drive drums
            guarantee the full transmission of the 5.5 kW drive power
            Grinding motors on the sanding belt. This results in the greatest chip removal
            possible. Automatic machine stop activation in the event of a belt break.
            Optical display
            on control panel. Sanding shoe for finish made of special material with optimal
            Heat dissipation and additional sliding coating. Easy to handle
            Pad change. Sanding belt tension over appropriately sized
            Compression springs. Sanding belt relaxation for belt changing using pneumatic
            Device for sensitive, distortion-free placement of new tapes. Upper
            Grinding unit and brush device (additional equipment) centrally motorized
            adjustable.

            Wooden guide in the inlet area for hard guide and bearings mounted on both sides
            pressure rollers. Tip-proof transport of profiled workpieces
            Calibrated conveyor belts with infinitely adjustable
            feed rate.

            Automatic machine stop triggering by wood thickness control device.
            Visual display of the control panel.

            Inlet table via fine-running, precise threaded spindle for lower
            Grinding chip removal can be adjusted manually using a scale (resolution 0.1
            mm). The length
            Column table guide guarantees absolute parallel adjustment. The
            The flight circle is coordinated with the exit table by adjusting the height of
            the lower one
            Grinding unit via precise threaded spindle and scale display (resolution 0.1
            mm) accomplished.

            Clear, user-friendly arrangement of all electrical functions and operating
            and display elements on the front of the machine: grinding unit below,
            Grinding unit on top, workpiece transport device,
            Grinding thickness adjustment, top/bottom brushing device, belt utilization,
            Operating display, fault display. All motors are against overload
            electrically protected.

            Technical data :
            --------------------------------

            Sanding belt speed: 25 m/sec.
            Grinding width: 190 mm
            Grinding thickness: 4 - 150 mm
            Shortest workpiece length: 280 mm

            Feed speed, continuously adjustable 5 - 25 m/min.

            Sanding belt dimensions: 200 mm width, 1850 mm length

            Electrical equipment according to VDE

            Electrical connection: 400 V., 3/N, 50 Hz.

            Pneumatic connection: R 3/8", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed:
            0.75 kW Height adjustment: 0.18 kW

            Pneumatic connection: R 3/8", 80 NL, min. 6 bar, max. 8 bar Exhaust air
            quantity: 2 x
            2000 to 2500 m3/h 20 - 25 m/sec.

            Suction connection piece: 2 x 180 mm diameter, at the top of the machine housing

            External dimensions: without control cabinet 1750 mm width, 1850 mm height,
            1000 mm depth

            with control cabinet 1960 mm wide, 1850 mm high, 1000 mm deep

            Working height: 835 mm

            in the range 4-20 mm only without a guide ruler
            Paint finish: RAL 7030 stone gray with RAL 1018 zinc yellow

            Additional equipment:

            1 digital display for motor. Grinding thickness adjustment

            1 facility for oscill. Abrasive belt utilization device for oscillating
            Utilization of sanding belts to increase the service life of the sanding belts
            and improve them
            of the surface finish through motor-driven sanding unit adjustment.
            Connected load: 0.12 kW, 380 V, 3/N, 50 Hz

            1 brushing and finishing device, for better surface finish, integrated in
            the basic machine. Two special brush rollers 150 mm arranged one above the other
            Diameter in synchronization function for feed. Separate height adjustment
            Brush rollers on precise carriage guides for wear correction.

            1 pneumatic workpiece release device after brushing and finishing
            Furnishings


            Included:
            1 piece of undriven roller conveyor as an inlet
            1 piece of undriven roller conveyor as an outlet (without feets), length
            approx. 3 m

            VIDEO not original shows machine of the same type

            (Technical data according to the manufacturer, no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine HESS Junior


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2699 · Sanding machine

          HESS - Junior - - gebraucht -

          Technical details
          Number of sanding units 2 st.︱sanding width 190 mm︱Sanding height max. 4-150 mm︱
          Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full transmission of the 5.5 kW drive power of the grinding motors on the grinding belt. This means the strongest chip removal possible. Automatic machine stop triggering if the tape breaks. Optical display on control panel. Sanding shoe for finish made of special material with optimal Heat dissipation and additional sliding lining. Easy to use pad change. Abrasive belt tension over appropriately dimensioned compression springs. Sanding belt relaxation for belt change by means of pneumatic Device for sensitive, distortion-free loading of new tapes. Upper Grinding unit and brush device (additional equipment) centrally motorized adjustable. Timber guide in the entry area for hard guide and guide rails supported on both sides pinch rollers. Tilt-proof transport of profiled workpieces calibrated conveyor belts with continuously adjustable feed rate. Automatic machine stop triggering by wood thickness control device. Optical display of the control panel. Infeed table via fine, precise threaded spindle for lower Grinding chip removal manually adjustable via scale (resolution 0.1 mm). The length Column table guidance guarantees an absolute parallel adjustment. The Adjustment of the flight circle to the outfeed table is achieved by adjusting the height of the lower one Grinding unit via precise threaded spindle and scale display (resolution 0.1 mm) accomplished. Clear, user-friendly arrangement of all electrical functional, operating and display elements on the front of the machine: grinding unit below, Grinding unit above, workpiece transport device, Grinding thickness setting, brushing device above/below, belt utilization, Operating display, fault display. All motors are against overload electrically secured. Technical specifications : --------------------------------- Sanding belt speed: 25 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 150 mm Shortest workpiece length: 280 mm Feed speed, continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection : 400 V., 3/N, 50 Hz. Pneumatic connection: R 3/8", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed: 0.75 kW height adjustment : 0.18 kW Pneumatic connection: R 3/8", 80 NL, min. 6 bar, max. 8 bar Extraction air quantity: 2 x 2000 to 2500 m3/h 20 - 25 m/sec. Extraction connection piece: 2 x 180 mm dia, on top of the machine housing External dimensions: without control cabinet 1750 mm wide, 1850 mm high, 1000 mm deep with control cabinet 1960 mm wide, 1850 mm high, 1000 mm deep Working height: 835 mm in the range of 4-20 mm only without guide rule Paint : RAL 7030 stone gray with RAL 1018 zinc yellow Additional equipment: 1 digital display for engine. grinding thickness adjustment 1 facility for Oscillation. Abrasive belt utilization device for oscillating Abrasive belt utilization to increase the service life of the abrasive belts and improvement of the surface finish by motor-driven adjustment of the grinding unit. Connection value: 0.12 kW, 380 V, 3/N, 50 Hz 1 brush and finish device, for better surface finish, integrated in the basic machine. Two special brush rollers 150 mm arranged one above the other Diameter in synchronism function to the feed. Separate height adjustment Brush rollers on precise carriage guides for post-wear correction. 1 pneumatic workpiece release device after brushing and finishing Furnishings Pictures and VIDEO shows machine of the same type Option: 1 piece unpowered roller conveyor as infeed 1 pc. driven conveyor belt with pusher, length 3 m 2 non-driven roller conveyors as a return to the operator (Technical data according to the manufacturer, without guarantee!)
            Number of sanding units 2 st.
            sanding width 190 mm
            Sanding height max. 4-150 mm
            Description :
            Hess Junior single wood sander
            ---------------------------------

            basic structure:

            Stable, heavy welded construction made of thick-walled rectangular hollow
            profiles
            with additional, statically calculated bracing for optimal
            vibration damping.

            Staggered grinding units with large dimensioned
            Belt drive drums for slip-free belt travel. Two-point suction for direct
            and airborne dust extraction with integrated blow-off device. grinding units
            in heavy steel plate construction as the basis for vibration-damped,
            quiet belt run. All guides as a ball linear set on hardened and
            polished waves. Lasting precision thanks to protection against dust and dirt
            of the sphere linear sets. Contact roller and sanding pad in a balanced ratio
            to the grinding belt grain load. The large dimensioned drive drums
            guarantee the full transmission of the 5.5 kW drive power of the
            grinding motors on the grinding belt. This means the strongest chip removal
            possible. Automatic machine stop triggering if the tape breaks. Optical display
            on control panel. Sanding shoe for finish made of special material with optimal
            Heat dissipation and additional sliding lining. Easy to use
            pad change. Abrasive belt tension over appropriately dimensioned
            compression springs. Sanding belt relaxation for belt change by means of
            pneumatic
            Device for sensitive, distortion-free loading of new tapes. Upper
            Grinding unit and brush device (additional equipment) centrally motorized
            adjustable.

            Timber guide in the entry area for hard guide and guide rails supported on both
            sides
            pinch rollers. Tilt-proof transport of profiled workpieces
            calibrated conveyor belts with continuously adjustable
            feed rate.

            Automatic machine stop triggering by wood thickness control device.
            Optical display of the control panel.

            Infeed table via fine, precise threaded spindle for lower
            Grinding chip removal manually adjustable via scale (resolution 0.1 mm). The
            length
            Column table guidance guarantees an absolute parallel adjustment. The
            Adjustment of the flight circle to the outfeed table is achieved by adjusting
            the height of the lower one
            Grinding unit via precise threaded spindle and scale display (resolution 0.1
            mm) accomplished.

            Clear, user-friendly arrangement of all electrical functional, operating
            and display elements on the front of the machine: grinding unit below,
            Grinding unit above, workpiece transport device,
            Grinding thickness setting, brushing device above/below, belt utilization,
            Operating display, fault display. All motors are against overload
            electrically secured.

            Technical specifications :
            ---------------------------------

            Sanding belt speed: 25 m/sec.
            Grinding width: 190 mm
            Grinding thickness: 4 - 150 mm
            Shortest workpiece length: 280 mm

            Feed speed, continuously adjustable 5 - 25 m/min.

            Sanding belt dimensions: 200 mm width, 1850 mm length

            Electrical equipment according to VDE

            Electrical connection : 400 V., 3/N, 50 Hz.

            Pneumatic connection: R 3/8", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed:
            0.75 kW height adjustment : 0.18 kW

            Pneumatic connection: R 3/8", 80 NL, min. 6 bar, max. 8 bar Extraction air
            quantity: 2 x
            2000 to 2500 m3/h 20 - 25 m/sec.

            Extraction connection piece: 2 x 180 mm dia, on top of the machine housing

            External dimensions: without control cabinet 1750 mm wide, 1850 mm high, 1000
            mm deep

            with control cabinet 1960 mm wide, 1850 mm high, 1000 mm deep

            Working height: 835 mm

            in the range of 4-20 mm only without guide rule
            Paint : RAL 7030 stone gray with RAL 1018 zinc yellow

            Additional equipment:

            1 digital display for engine. grinding thickness adjustment

            1 facility for Oscillation. Abrasive belt utilization device for oscillating
            Abrasive belt utilization to increase the service life of the abrasive belts
            and improvement
            of the surface finish by motor-driven adjustment of the grinding unit.
            Connection value: 0.12 kW, 380 V, 3/N, 50 Hz

            1 brush and finish device, for better surface finish, integrated in
            the basic machine. Two special brush rollers 150 mm arranged one above the other
            Diameter in synchronism function to the feed. Separate height adjustment
            Brush rollers on precise carriage guides for post-wear correction.

            1 pneumatic workpiece release device after brushing and finishing
            Furnishings

            Pictures and VIDEO shows machine of the same type

            Option:
            1 piece unpowered roller conveyor as infeed
            1 pc. driven conveyor belt with pusher, length 3 m
            2 non-driven roller conveyors as a return to the operator

            (Technical data according to the manufacturer, without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine HESS Expert


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2717 · Sanding machine

          HESS - Expert - - gebraucht -

          Technical details
          Number of sanding units 4 St︱sanding width 190 mm︱Sanding height max. 4-180 mm︱weight 4200 kg︱
          Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on calibrated ones Conveyor belts with infinitely adjustable feed speed. Automatic machine stop triggering by wood thickness control device. Visual display on the control panel and via flashing lights on the machine. Inlet table via fine-running, precise threaded spindle for lower Grinding chip removal via digital display in the control panel (resolution 0.01 mm) motor adjustable. The long column table guide guarantees absolute Parallel adjustment. The flight circle coordination to the exit table is carried out by Height adjustment of the lower grinding units via precise threaded spindle Scale display (resolution 0.1 mm). Oscill setup. Utilization of the sanding belt to increase service life Sanding belts and improvement of the surface finish through motorized sanding and brush unit transverse displacement. Clear, user-friendly arrangement of all electrical functions and operating and display elements in the control panel: Grinding unit below (pre-grinding regrinding), grinding unit on top, (pre-grinding-regrinding), automatic. Star- Triangle start control of the grinding motors, belt utilization oscillation, brushing and finish device (bottom = top), central height adjustment with digital Dimension display, height adjustment of the infeed table with digital dimension display, Operating display, fault display. Stop and emergency stop button. 2 potential-free contacts for pre-machine feed stop in the event of a malfunction. Electrical protection of all motors against overload Technical data : Sanding belt speed 25 m/sec. Grinding width 190 mm Grinding thickness 4 - 180 mm Shortest workpiece length 280 mm Feed speed continuously adjustable 5 - 25 m/min. Sanding belt dimensions 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection 380 V., 3/N, 50 Hz. Pneumatic connection R 3/8", 6 bar, 80 NL Total connected load approx. 26 kW (at maximum load) =Grinding units 4 x 5.5 kW =Brushing and finishing device 2 x 0.75 kW =feed 1.1 kW =central height adjustment 0.55 kW =Height adjustment Inlet table 0.06 kW =Grinding belt utilization oscillation 0.12 kW Exhaust air volume 3 x at least 2500 m³/h, 20 - 25 m/sec. Suction connection piece 3 x 180 mm diameter, at the top of the machine housing External dimensions 2450mm width 1900mm height 1200mm depth Working height 830 mm Weight: approx. 4200 kg Paint finish: RAL 7013 stone gray with RAL 1018 zinc yellow If the transport facilities for delivery and removal are not available are supplied, the customer must ensure that delivery is possible the wood guide and the transverse push-off for possible removal are installed. Danger ! The height settings of the infeed and outfeed Equipment must be precisely coordinated with the grinding machine. Workpiece blow-off device after Brushing and finishing device using flat jet nozzles, below and arranged at the top with solenoid control valve, separate maintenance unit and pressure control, with control for automatic. Shutdown if no workpiece transport takes place. Maximum air consumption: 4000 NL/h at 4 bar (only for workpiece transport) Technical information according to the manufacturer, without guarantee!
            Number of sanding units 4 St
            sanding width 190 mm
            Sanding height max. 4-180 mm
            weight 4200 kg
            Description :
            Hess Expert 4-belt single wood sanding machine
            machine will be checked by our technicians
            --------------------------------------
            Ø Grinding at the bottom/top
            Ø With 2 offset grinding units each (bottom and top)
            Ø Grinding units (bottom and top) connected in series according to the
            Dressing principle
            Ø Pre-sanding with coarse grit (calibrate)
            Ø Regrinding with fine grit (finish)
            Ø Central motorized height adjustment of the lower grinding units
            Ø Central motorized and synchronous height adjustment of the entire upper
            Grinding and brushing units including the upper transport units
            Ø Oscillating sanding belt utilization (during the sanding process)
            Ø Absolute power connection thanks to 5.5 KW motors and large dimensions
            drive drums
            Ø Oxide ceramic grinding shoe for
            - exact surface geometry
            - no adjustment work
            - permanent dimensional accuracy
            - completely maintenance and wear-free

            Basic structure:
            Stable, heavy welded construction made of strong-walled rectangular profiles
            additional, statically calculated reinforcements for optimal
            Vibration dampening.

            Staggered grinding units with large dimensions
            Belt drive drums for slip-free belt running. Two-point suction for direct
            and flying dust with sealing brushes and integrated sanding belt blow-off
            Device to increase the service life of the sanding belts. Grinding units in
            heavy steel plate construction as the basis for vibration-damped,
            quiet tape running. Absolutely backlash-free guides as ball linear sets
            hardened and ground shafts. Height adjustment of the grinding units
            via hardened and ground special linear guides as well as pre-tensioned ones
            Guide carriage. Permanent precision thanks to dust and dirt protection
            Ball linear sets and guide carriages.
            Large-sized pre-grinding rollers as contact rollers. Contact rollers and
            Sanding shoes in a balanced ratio to the sanding belt grain load.
            The large drive drums guarantee full transmission
            the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore
            Slip-free, stable running and optimal heat dissipation. This makes it the
            strongest
            Chip removal possible. Automatic machine stop activation in the event of a belt
            break.
            Visual display on the control panel and via flashing lights on the machine.
            Sanding shoes for finish completely maintenance-free and wear-free made of
            oxide ceramic
            with optimal heat dissipation.
            Grinding belt tension via appropriately sized compression springs.
            Sanding belt relaxation for belt changing using a pneumatic device
            sensitive, distortion-free placement of new tapes.
            Upper grinding unit and brush device centrally motorized
            Height adjustable with digital display in the control panel for the motorized
            Grinding thickness adjustment.

            Brushing and finishing device, for better surface finish, integrated into
            the basic machine. Two special brush rollers 150 mm Æ arranged one above the
            other
            in synchronous function for advance
            thrust. Separate height adjustment of the brush rollers on precise
            Carriage guides for post-correction of wear. Additional transport roller for
            Removal or further transport of the workpiece from the automatic grinding
            machine
            with the conveyor belt.

            Wooden guide in the inlet area for hard guide and bearings mounted on both sides
            pressure rollers. Safe transport of profiled workpieces on calibrated ones
            Conveyor belts with infinitely adjustable feed speed.
            Automatic machine stop triggering by wood thickness control device.
            Visual display on the control panel and via flashing lights on the machine.

            Inlet table via fine-running, precise threaded spindle for lower
            Grinding chip removal via digital display in the control panel (resolution 0.01
            mm)
            motor adjustable. The long column table guide guarantees absolute
            Parallel adjustment. The flight circle coordination to the exit table is
            carried out by
            Height adjustment of the lower grinding units via precise threaded spindle
            Scale display (resolution 0.1 mm).

            Oscill setup. Utilization of the sanding belt to increase service life
            Sanding belts and improvement of the surface finish through motorized sanding
            and brush unit transverse displacement.

            Clear, user-friendly arrangement of all electrical functions and operating
            and display elements in the control panel: Grinding unit below (pre-grinding
            regrinding), grinding unit on top, (pre-grinding-regrinding), automatic. Star-
            Triangle start control of the grinding motors, belt utilization oscillation,
            brushing
            and finish device (bottom = top), central height adjustment with digital
            Dimension display, height adjustment of the infeed table with digital dimension
            display,
            Operating display, fault display. Stop and emergency stop button.

            2 potential-free contacts for pre-machine feed stop in the event of a
            malfunction.
            Electrical protection of all motors against overload

            Technical data :

            Sanding belt speed 25 m/sec.
            Grinding width 190 mm
            Grinding thickness 4 - 180 mm
            Shortest workpiece length 280 mm
            Feed speed continuously adjustable 5 - 25 m/min.
            Sanding belt dimensions 200 mm width, 1850 mm length
            Electrical equipment according to VDE
            Electrical connection 380 V., 3/N, 50 Hz.
            Pneumatic connection R 3/8", 6 bar, 80 NL
            Total connected load approx. 26 kW (at maximum load)
            =Grinding units 4 x 5.5 kW
            =Brushing and finishing device 2 x 0.75 kW
            =feed 1.1 kW
            =central height adjustment 0.55 kW
            =Height adjustment Inlet table 0.06 kW
            =Grinding belt utilization oscillation 0.12 kW
            Exhaust air volume 3 x at least 2500 m³/h, 20 - 25 m/sec.
            Suction connection piece 3 x 180 mm diameter, at the top of the machine housing
            External dimensions
            2450mm width
            1900mm height
            1200mm depth
            Working height 830 mm
            Weight: approx. 4200 kg

            Paint finish: RAL 7013 stone gray with RAL 1018 zinc yellow

            If the transport facilities for delivery and removal are not available
            are supplied, the customer must ensure that delivery is possible
            the wood guide and the transverse push-off for possible removal
            are installed. Danger ! The height settings of the infeed and outfeed
            Equipment must be precisely coordinated with the grinding machine.


            Workpiece blow-off device after
            Brushing and finishing device using flat jet nozzles, below and
            arranged at the top with solenoid control valve, separate maintenance unit
            and pressure control, with control for automatic. Shutdown if
            no workpiece transport takes place. Maximum air consumption:
            4000 NL/h at 4 bar (only for workpiece transport)

            Technical information according to the manufacturer, without guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER LZ 8


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6478 · Sanding machine

          LÖWER - LZ 8 - - 2008 -

          Technical details
          Number of sanding units 8 st.︱sanding width 150 mm︱
          Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area. By the It is possible to immerse the aggregates deeper in the Be able to deliver profiles. - Timed replacement of the rotating in synchronism Aggregate - motor workpiece thickness adjustment of the machine by means of motorized height adjustment via push button - Display of workpiece thickness via digital display with modern magnetic tape system - Variable grinding disc speed via frequency converter to adapt the grinding intensity to different Primers by means of frequency converters 200-1000 rpm - Workpiece width recognition at the machine infeed with automatic adjustment of the left grinding units to the current workpiece width - Profile preselection via selector switch on the machine inlet side as well as automatic adjustment of the Abrasive blade aggregates on the selected profile - modern PLC control for easy operation of the machine - Suction connection 5 x 100mm diameter - Length (body) x width x height (mm): 2600 x 1500 x 1600 Length complete: 3600mm (including roller conveyor with integrated workpiece width recognition) - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version Technical specifications: Number of sanding units: 8 pcs. Surface brush width: max. 150 mm Working height: max. 100 mm Surface Brush Motor: 0.75 kW Side brush motor: 0.37 kW Brush speed: 1380 rpm Feed motor: 1.1 kW Feed rate: 4-20 M / min Feed stepless Speed ??controller grinding units Automatic width detection Digital magnetic tape gauge Extraction nozzle: 5 x 100 mm Air requirement: 5 x 565 m3 / h Minimum air velocity at the connection of the machine: 20 m / s Dimensions: Length: 2600 mm Width: 1480 mm Height: 1700 mm Weight: 950 kg WITH inlet roller conveyor ------------------------------------- Price of the Löwer amchine on request! he return conveyor device that can be seen in the pictures is no longer available and is NOT included in the scope of delivery (Technical data according to manufacturer - without guarantee!)
            Number of sanding units 8 st.
            sanding width 150 mm
            Description :
            Machine can be inspected during production!

            Leistomat - Finisch and intermediate leveling machine Löwer LZ 8
            -------------------------------------------------- -------------------

            for finish sanding (smoothing, defibering and edge breaking)
            or intermediate sanding profiled window latch
            - Finish and intermediate sanding machine with eight sanding blade aggregates,
            2 surface units at the top (synchronism / counter-rotation)
            2 surface units below (synchronism / counter-rotation)
            4 profile units with angled arrangement top right,
            bottom right, top left, bottom left, all mating
            - linear guidance of all grinding units over
            Linear ball bearing sets on hardened shafts
            - Timed immersion of all in the opposite direction
            rotating grinding units directly above the incoming
            Workpiece edges to avoid looping through the
            Primer in the front edge area. By the
            It is possible to immerse the aggregates deeper in the
            Be able to deliver profiles.
            - Timed replacement of the rotating in synchronism
            Aggregate
            - motor workpiece thickness adjustment of the machine
            by means of motorized height adjustment via push button
            - Display of workpiece thickness via digital display with
            modern magnetic tape system
            - Variable grinding disc speed via frequency converter
            to adapt the grinding intensity to different
            Primers by means of frequency converters 200-1000 rpm
            - Workpiece width recognition at the machine infeed with
            automatic adjustment of the left grinding units
            to the current workpiece width
            - Profile preselection via selector switch on the machine inlet side
            as well as automatic adjustment of the
            Abrasive blade aggregates on the selected profile
            - modern PLC control for easy operation of the machine
            - Suction connection 5 x 100mm diameter
            - Length (body) x width x height (mm): 2600 x 1500 x 1600
            Length complete: 3600mm (including roller conveyor with
            integrated workpiece width recognition)
            - Operating voltage 400V, 50Hz, 3P, air connection 6 bar
            - CE version


            Technical specifications:

            Number of sanding units: 8 pcs.

            Surface brush width: max. 150 mm
            Working height: max. 100 mm
            Surface Brush Motor: 0.75 kW
            Side brush motor: 0.37 kW
            Brush speed: 1380 rpm
            Feed motor: 1.1 kW
            Feed rate: 4-20 M / min
            Feed stepless

            Speed ??controller grinding units
            Automatic width detection
            Digital magnetic tape gauge

            Extraction nozzle: 5 x 100 mm
            Air requirement: 5 x 565 m3 / h
            Minimum air velocity at the connection of the machine: 20 m / s

            Dimensions:
            Length: 2600 mm
            Width: 1480 mm
            Height: 1700 mm

            Weight: 950 kg

            WITH inlet roller conveyor
            -------------------------------------
            Price of the Löwer amchine on request!

            he return conveyor device that can be seen in the pictures is no longer
            available and is NOT included in the scope of delivery


            (Technical data according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine GÖCKEL G65w


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06331 · Sanding machine

          GÖCKEL - G65w - - 1988 -

          Technical details
          weight 4 t︱swing diameter 650 mm︱centre distance 3500 mm︱
            weight 4 t
            swing diameter 650 mm
            centre distance 3500 mm


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          LÖWER - HESS - QUICKWOOD - GÖCKEL - MB -