Injection-moulding machine (rubber)
Machinelist: Injection-moulding machine (rubber)
Injection-moulding machine (rubber)
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B240402 · Injection-moulding machine (rubber)
DESMA - 968.250 ZO - - 2022 -
Technical details
Condition: used, Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition almost unused! clamping unit: - Euromap (size): 2700-7200 - Clamping force: 2,700 kN - Heating platen size L/W/H: 780 x 670 mm - Distance between upper and lower platen: 970 mm - Stroke min.: 420 mm - Stroke: 550 mm Injection unit: - Injection volume max.: 3,300 cm³ - Injection pressure: 2,180 bar - Nozzle contact force: 80 kN - Connected load: 3x 400 V, 50 Hz, N - Back-up fuse: 125 A - Pump drive: 265 bar - Drive power: 22 kW - Pump speed: 66 rpm - Current: 41 A - Weight approx.: 11.2 tonnes Operating hours approx.: 395 hours
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B221112 · Injection-moulding machine (rubber)
DESMA - 968.1000 ZO B900 - - 2012 -
Technical details
Condition: used, Specification: injection moulding machine for rubber - used, in very good condition machine was serviced annually by manufacturer clamping unit: - Euromap (size): 11000-25600 - clamping force: 11.000 kN - size of heating platens L/W/H: 1000 x 1800 x mm - Distance upper- lower plate: 1200 mm - Stroke min.: 630 mm - Max. stroke: 1030 mm Injection unit: - Injection volume max.: 12,500 cm³ - Injection pressure: 2050 bar - Dosing force: 118 kN - Control: Siemens S7 - Connected load: 3x 400 V, 50 Hz, N - Total current: 276 A - Back-up fuse: 300 A - Pump drive: 277 bar - Driving power: 45 kW - Weight approx.: 43.8 t Operating hours approx.: 33,130 hours
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B221102 · Injection-moulding machine (rubber)
BOY - E35 VV - - 2011 -
Technical details
Condition: used, Specification: injection moulding machine for TPE - used clamping unit: - clamping unit: vertical - clamping force: 350 kN - opening stroke max.: 300 mm - platen distance max.: 500 mm - Mould installation height min.: 200 mm - Clear width between tie bars: 260 x 254 mm - Ejector stroke max.: 80 mm - Clamping unit: VV - Lift of protective bonnet: 500 mm Injection unit: - Screw diameter: 28 mm - Screw L/D ratio: 18.6 - Screw stroke max.: 95 mm - Injection volume max.: 58.5 cm³ - Injection pressure: 1577 bar - Plasticising flow: 8.6 g/s - Injection flow: 85.5 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive power: 7,4 kW - Total power: 13,2 kW - Hydraulics: 210 bar (tank 65 litres) - Operating hours approx.: 2.659 hours Dimensions L/W/H approx.: 2,047 x 803 x 2,710 mm Footprint: 1.7 m² Weight approx.: 1,670 kg Last maintenance: 01.2021 Incl. granulate conveyor and temperature control unit.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B210304 · Injection-moulding machine (rubber)
ENGEL - ES 200V/45 VT-Elast - - 2010 -
Technical details
Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive power: 11 kW - Weight without oil: 6,500 kg - Dimensions L/W/height: 2,500 x 1,900 x 3,680 mm
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B221101 · Injection-moulding machine (rubber)
REP - V38 Y04W - - 2005 -
Technical details
Condition: used, Specification: injection moulding machine for rubber - used clamping unit: - clamping unit: vertical - clamping force: 1.013 kN - size of heating platen: 335 x 400 mm (standard) core turning unit Injection unit: - screw diameter: 25 mm - Barrel diameter: 51 mm - Injection volume max.: 400 cm³ - Injection pressure: 1,500 bar - Connection value: 3x 400 V, 50 Hz 42A fuse protection (incl. periphery) - Electrical power: 29,1 kVA - Control: G8 Control - Hydraulics: 250 bar (tank 200 litres) - Further connections: Cooling water inlet/outlet Dimensions L/W/H approx.: 2,300 x 3,400 x 2,250 mm Weight approx.: 2,950 kg Not for sale: Article-specific extensions (demoulding unit, cold runner block with temperature control units) Available as from 01.01.2023
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B210803 · Injection-moulding machine (rubber)
ENGEL - ES 200/45 VTHL - - 2004 -
Technical details
Condition: used, Specification: C-frame injection moulding machine for TPE - used, from testing department Including PIOVAN dosing unit clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - Clear width: 585 mm - Tool installation height min.: 185 mm - Max. stroke: 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 - Ejector stroke: 200 mm Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B220302 · Injection-moulding machine (rubber)
ENGEL - ES 200/25 VHL - - 2003 -
Technical details
Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B220801 · Injection-moulding machine (rubber)
ARBURG - 520 C 1300-350 - - 2001 -
Technical details
Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,380 kg - Oil filling: 260 litres - Operating hours approx.: 64,903 h
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B210303 · Injection-moulding machine (rubber)
ENGEL - ES 200V/45 VT-Elast - - 2001 -
Technical details
Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive power: 15 kW - Weight without oil: 5,500 kg - Dimensions L/W/height: 2,500 x 1,900 x 3,680 mm
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B230201 · Injection-moulding machine (rubber)
ARBURG - 270 M 350-90 - - 1996 -
Technical details
Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power: 15,6 kW - Connection value: 3x 400 V, 50 Hz - Electrical connection (pre-fuse): 50 A - Weight approx.: 1,650 kg - Oil filling: 190 litres - Switch cabinet: 150 kg - Operating hours approx.: 1,100 h
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B230701 · Injection-moulding machine (rubber)
ENGEL - ES 330/80 LIM - - 1993 -
Technical details
Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN08 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm - Control: CC 90-A0 Injection unit: - Injection volume max.: 78 cm³ - Injection weight max.: 90 g - Screw diameter: 25 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 400 rpm - Injection flow: 87 g/sec - Injection flow (increased): 64 g/sec - Specific injection pressure: 2400 bar - Nozzle stroke: 250 mm - Nozzle contact pressure: 47 kN Drive: - Voltage: 3x 400 V, 50 Hz, N, PE - Pump drive power: 15 kW - Oil filling: 185 l - Weight approx.: 4.000 kg
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B230702 · Injection-moulding machine (rubber)
ENGEL - ES 330/80 LIM - - 1991 -
Technical details
Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN12 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm Injection unit: - Injection volume max.: 154 cm³ - Injection weight max.: 156 g - Screw diameter: 35 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 320 rpm - Delivery flow: 35 g/sec - Injection flow: 148 g/sec - Injection flow (increased): 107 g/sec - Specific injection pressure: 1600 bar - Specific injection pressure increased: 2200 bar - Nozzle stroke: 250 mm - Nozzle contact pressure: 47 kN - Control: CC 90-A02 Drive: - Voltage: 3x 400 V, 50 Hz, N, PE - Pump drive power: 15 kW - Oil filling: 155 l - Weight approx.: 3,100 kg
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B210301 · Injection-moulding machine (rubber)
REMAK-Keil GmbH - ESM 30-SP - - 1981 -
Technical details
Condition: used, Specification: Vertical C-frame Injection Moulding Machine for rubber - second-hand suitable for vulcanising together extruded rubber profiles to sealing frames or for the production of small precision moulded parts. The C-frame design ensures very good mould accessibility accessibility of the tools from three sides, so that when vulcanising the necessary space when vulcanising sealing profiles. to be able to work comfortably even with multiple tools. be able to work comfortably. Injection unit: - Injection volume approx.: 105 cm³ - Injection pressure approx.: 1,800 bar Clamping unit: - Clamping force: 300 kN - Size of heating platen: 300 x 400 mm - Clamping speed: 100 mm/sec - Heating power per platen: 3 kW - Total power with sliding table: 9 kW With alternating sliding table, i.e. two moulds can be used at the same time. two moulds at the same time. - Dimensions approx.: 2.400 x 1.400 x 2.600 mm - Weight approx.: 3,000 kg
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-B240401 · Injection-moulding machine (rubber)
DESMA - 968.250 ZO - - 10.2021 -
Technical details
Condition: used, Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition 6 months in use clamping unit: - Euromap (size): 2700-7200 - Clamping force: 2,700 kN - Heating platen size L/W/H: 780 x 670 mm - Distance between upper and lower platen: 970 mm - Stroke min.: 420 mm - Stroke: 550 mm Injection unit: - Injection volume max.: 3,300 cm³ - Injection pressure: 2,180 bar - Nozzle contact force: 80 kN - Connected load: 3x 400 V, 50 Hz, N - Back-up fuse: 125 A - Pump drive: 265 bar - Drive power: 22 kW - Pump speed: 66 rpm - Current: 41 A - Weight approx.: 11.2 tonnes Operating hours approx.: 8,185 hours