‚
Europejska sieć dealerów maszyn magazynowych
+ 49 (0) 2389 5299080
Usługa wyszukiwania Sprzedawaj używane maszyny

Bitte einen Suchbegriff eingeben - Wprowadź wyszukiwane hasło
Kategoria:
    Producent:
      maszyny:
        Handlowiec:
             Widok: 
          1. machine-categorie:
          2. Metal Processing
          3. Presses

          Presses

          Machinelist: Presses

          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            year of manufacture: 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            moving tables (2x) without rails for the moving tables


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact

          Double Column Drawing Press - Mechanical

          used Presses Double Column Drawing Press - Mechanical SCHULER E4-600-3.35-762

          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland
          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0362 · Double Column Drawing Press - Mechanical

          SCHULER - E4-600-3.35-762 - - 1984 -

          Technical details
          Pressure total 600 t︱Slide adjustment 406 mm︱Shut height (stroke down, adjustment up) 1322 mm︱Free frontal opening L-R 3700 mm︱Table surface area 3350 x 2134 mm︱Die cushion capacity in table 180 t︱Die cushion stroke 305 mm︱Ejector in ram 60 t︱Ejector stroke in ram 230 mm︱Number of strokes 16 min-1︱Weight of machine approx. 185 t︱
            Pressure total 600 t
            Slide adjustment 406 mm
            Shut height (stroke down, adjust. 1322 mm
            Free frontal opening L-R 3700 mm
            Table surface area 3350 x 2134 mm
            Die cushion capacity in table 180 t
            Die cushion stroke 305 mm
            Ejector in ram 60 t
            Ejector stroke in ram 230 mm
            Number of strokes 16 min-1
            Weight of machine approx. 185 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Double Column Drawing Press - Mechanical SCHULER E4-1500-5-0.8

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20135 · Double Column Drawing Press - Mechanical

          SCHULER - E4-1500-5-0.8 - - 1970 -

          Technical details
          pressure 1500 t︱daylight 5060 mm︱mould space - mm︱table surface area 5000 x 2700 mm︱main drive 90 kW︱max. ram stroke 800 mm︱ram adjustment 600 mm︱no. of strokes 10 Hub/min︱ram head dimension 5000 x 2700 mm︱die cushion stroke 200 mm︱die cushion to︱total power requirement kW︱weight of the machine ca. t︱
          MECHANICAL PRESS - Distance between clamping plate and ram with stroke at bottom, adjustment at top: 1600 mm - Compressed air pulling device in the table -- stroke 200mm - Ejector in ram -- Stroke 150mm
            pressure 1500 t
            daylight 5060 mm
            mould space - mm
            table surface area 5000 x 2700 mm
            main drive 90 kW
            max. ram stroke 800 mm
            ram adjustment 600 mm
            no. of strokes 10 Hub/min
            ram head dimension 5000 x 2700 mm
            die cushion stroke 200 mm
            Description :
            MECHANICAL PRESS
            - Distance between clamping plate and ram with stroke at bottom, adjustment at
            top: 1600 mm

            - Compressed air pulling device in the table
            -- stroke 200mm

            - Ejector in ram
            -- Stroke 150mm


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

          • Datasheet
          Request / Contact

          double-sided high speed press

          used Presses double-sided high speed press WEINGARTEN HU 2-200.12

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133065 · double-sided high speed press

          WEINGARTEN - HU 2-200.12 - - 1988 - Siemens S 5

          Technical details
          pressure 200 t︱stroke 30 - 160 mm︱no. of strokes 40 - 120 /min︱distance between columns 1500 / 1300 mm︱dayligth (stroke and adjustment up) 860 mm︱column travel -side 600 x 530 mm︱table surface area 1250 x 1250 mm︱hole in the table 550 x 300 mm︱table height over floor 1000 mm︱ram surface 1250 x 1000 mm︱ram adjustment 125 mm︱material width 30 - 500 mm︱material thickness 0,5 - 3,0 mm︱feed length 0 - 999,9 mm︱power requirement 50,0 kW︱Weight 34,00 t︱dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed
            pressure 200 t
            stroke 30 - 160 mm
            no. of strokes 40 - 120 /min
            distance between columns 1500 / 1300 mm
            dayligth (stroke and adjustment . 860 mm
            column travel -side 600 x 530 mm
            table surface area 1250 x 1250 mm
            hole in the table 550 x 300 mm
            table height over floor 1000 mm
            ram surface 1250 x 1000 mm
            ram adjustment 125 mm
            material width 30 - 500 mm
            material thickness 0,5 - 3,0 mm
            feed length 0 - 999,9 mm
            power requirement 50,0 kW
            Weight 34,00 t
            dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses double-sided high speed press SCHULER SA 125

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-033097 · double-sided high speed press

          SCHULER - SA 125 - - 1977 - konventionell

          Technical details
          pressure 125 t︱distance between columns 1150 mm︱stroke fix 25 mm︱no. of strokes 70 - 700 Hub/min︱dayligth (stroke and adjustment up) 400 mm︱column travel -side 650 mm︱table surface area 1150 x 1000 mm︱hole in the table 900 x 220 mm︱table height over floor 1500 mm︱ram surface 990 x 850 mm︱ram adjustment 60 mm︱power requirement 46,5 kW︱Weight 29,5 t︱dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, mechanical roll feed (make Schuler, Type WK 8-250) can be offered without putting into operation (partly dismantled) or alternatively with new control Siemens S 7-1500 F
            pressure 125 t
            distance between columns 1150 mm
            stroke fix 25 mm
            no. of strokes 70 - 700 Hub/min
            dayligth (stroke and adjustment . 400 mm
            column travel -side 650 mm
            table surface area 1150 x 1000 mm
            hole in the table 900 x 220 mm
            table height over floor 1500 mm
            ram surface 990 x 850 mm
            ram adjustment 60 mm
            power requirement 46,5 kW
            Weight 29,5 t
            dimensions of the machine (WxDxH. 3,3 x 1,8 x 4,7 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, mechanical roll feed (make Schuler, Type WK 8-250)
            can be offered without putting into operation (partly dismantled) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses double-sided high speed press WEINGARTEN DE 200.15

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183053 · double-sided high speed press

          WEINGARTEN - DE 200.15 - - 1976 - konventionell

          Technical details
          pressure 200 t︱distance between columns 1550 mm︱stroke 30 - 160 mm︱no. of strokes 30 - 90 Hub/min︱dayligth (stroke and adjustment up) 745 mm︱column travel -side 800 mm︱table surface area 1500 x 1150 mm︱hole in the table 450 mm︱table height over floor 810 mm︱ram surface 1500 x 1000 mm︱power requirement 38,0 kW︱weight of the machine ca. 26,5 t︱required space 5,1 x 1,6 x 3,7 m︱ram adjustment 110 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 200 t
            distance between columns 1550 mm
            stroke 30 - 160 mm
            no. of strokes 30 - 90 Hub/min
            dayligth (stroke and adjustment . 745 mm
            column travel -side 800 mm
            table surface area 1500 x 1150 mm
            hole in the table 450 mm
            table height over floor 810 mm
            ram surface 1500 x 1000 mm
            power requirement 38,0 kW
            weight of the machine ca. 26,5 t
            required space 5,1 x 1,6 x 3,7 m
            ram adjustment 110 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact

          Eccentric Press - Double Column

          used Presses Eccentric Press - Double Column WEINGARTEN DRD IV

          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland
          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03586 · Eccentric Press - Double Column

          WEINGARTEN - DRD IV - - 1950 -

          Technical details
          pressure 500 t︱distance between columns 1600 mm︱stroke 60 mm︱max. ram stroke 60 1 / min︱ram adjustment 100 mm︱dayligth 700 mm︱Table area 1600x1400 mm︱ram surface 1400x1150 mm︱total power requirement kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. m︱
          About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
            pressure 500 t
            distance between columns 1600 mm
            stroke 60 mm
            max. ram stroke 60 1 / min
            ram adjustment 100 mm
            dayligth 700 mm
            Table area 1600x1400 mm
            ram surface 1400x1150 mm
            weight of the machine ca. 40 t
            Description :
            About usmore than 400 machines in the warehouse over 12000 m² storage area,
            crane capacity 70 tmore than 1000 items accessories for your workshopYou want
            to sell machines production lines or your company, then talk to us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

          • Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used Presses Eccentric Press - Single Column WEINGARTEN ARP 80

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-872 · Eccentric Press - Single Column

          WEINGARTEN - ARP 80 - - überholt 2023/24 -

          Technical details
          pressure 80 t︱throat 320 mm︱stroke 8 - 112 mm︱table surface area 830 x 600 mm︱no. of strokes 30 - 85 Hub/min︱ram surface 650 x 400 mm︱ram adjustment 71 mm︱clamping plate 990 x 550 mm︱table height over floor 810 mm︱table height over floor 800 mm︱column daylight (vorn) 680 mm︱column daylight (hinten) 520 mm︱total power requirement 7,5 kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. 1,5 x 2,2 x 3,15 m︱
          Equipment: - with wheel presentation - fixed table - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm The machine should be partially overhauled - Complete disassembly and review - new coloring - new control cabinet with PLC and touchscreen including cabling.
            pressure 80 t
            throat 320 mm
            stroke 8 - 112 mm
            table surface area 830 x 600 mm
            no. of strokes 30 - 85 Hub/min
            ram surface 650 x 400 mm
            ram adjustment 71 mm
            clamping plate 990 x 550 mm
            table height over floor 810 mm
            table height over floor 800 mm
            column daylight (vorn) 680 mm
            column daylight (hinten) 520 mm
            total power requirement 7,5 kW
            weight of the machine ca. 7,7 t
            dimensions of the machine ca. 1,5 x 2,2 x 3,15 m
            Description :
            Equipment:
            - with wheel presentation
            - fixed table
            - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm

            The machine should be partially overhauled
            - Complete disassembly and review
            - new coloring
            - new control cabinet with PLC and touchscreen including cabling.



        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column SCHULER PDR 200/450 (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233008 · Eccentric Press - Single Column

          SCHULER - PDR 200/450 (UVV) - - 2009 - Siemens S 7

          Technical details
          pressure 200 t︱stroke 30 - 140 mm︱no. of strokes 40 /min︱throat 450 mm︱passage to the back 425 mm︱dayligth 630 mm︱table surface area 1020 x 880 mm︱hole in the table 540 / 500 mm︱table height over floor 800 mm︱ram surface 800 x 500 mm︱ram adjustment 125 mm︱power requirement 15,0 kW︱Weight 13,8 t︱dimensions of the machine ca. 2,2 x 2,35 x 3,43 m x m x m︱
          year of manufacture 1970 2009: modernization of electrical control (Siemens S 7) and modification of clutch-brake combination Ortlinghaus permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation
            pressure 200 t
            stroke 30 - 140 mm
            no. of strokes 40 /min
            throat 450 mm
            passage to the back 425 mm
            dayligth 630 mm
            table surface area 1020 x 880 mm
            hole in the table 540 / 500 mm
            table height over floor 800 mm
            ram surface 800 x 500 mm
            ram adjustment 125 mm
            power requirement 15,0 kW
            Weight 13,8 t
            dimensions of the machine ca. 2,2 x 2,35 x 3,43 m x m x m
            Description :
            year of manufacture 1970
            2009: modernization of electrical control (Siemens S 7) and modification of clutch-brake combination Ortlinghaus
            permitted for manual loading according to the German Safety Regulations (UVV)
            with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column SCHULER PDr C63-315

          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland
          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15319 · Eccentric Press - Single Column

          SCHULER - PDr C63-315 - - 2002 -

          Technical details
          pressure 63 t︱throat 315 mm︱stroke 8-100 mm︱no. of strokes 140 Hub/min︱ram - range of adjustment 63 mm︱table surface area 1200x630 mm︱ram surface 800x315 mm︱hole in the table Ø 110 mm︱table height 820 mm︱tool hole in ram Ø 50 mm︱dayligth 335 mm︱total power requirement 7,5 kW︱weight of the machine ca. 5 t︱
            pressure 63 t
            throat 315 mm
            stroke 8-100 mm
            no. of strokes 140 Hub/min
            ram - range of adjustment 63 mm
            table surface area 1200x630 mm
            ram surface 800x315 mm
            hole in the table Ø 110 mm
            table height 820 mm
            tool hole in ram Ø 50 mm
            dayligth 335 mm
            total power requirement 7,5 kW
            weight of the machine ca. 5 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN EXP 80 SV DK

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223036 · Eccentric Press - Single Column

          WEINGARTEN - EXP 80 SV DK - - 1993 - konventionell

          Technical details
          pressure 80 t︱throat 280 mm︱stroke 10 - 140 mm︱Stroke rate 85 / min︱Distance table/ram, max. stroke up, adjustment up 380 mm︱Table surface area 850 x 560 mm︱Hole in the table 300 x 200 mm︱Table height above floor 790 - 950 mm︱Ram surface 420 x 210 mm︱Ram adjustment 60 mm︱Power capacity 4,0 kW︱Weight 4,5 t︱Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation can be inspected in running condition in our warehouse
            pressure 80 t
            throat 280 mm
            stroke 10 - 140 mm
            Stroke rate 85 / min
            Distance table/ram, max. stroke . 380 mm
            Table surface area 850 x 560 mm
            Hole in the table 300 x 200 mm
            Table height above floor 790 - 950 mm
            Ram surface 420 x 210 mm
            Ram adjustment 60 mm
            Power capacity 4,0 kW
            Weight 4,5 t
            Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation
            can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column SCHULER PDR 160/400 (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163073V · Eccentric Press - Single Column

          SCHULER - PDR 160/400 (UVV) - - 1993 - konventionell

          Technical details
          pressure 160 t︱throat 400 mm︱stroke 30 - 200 mm︱no. of strokes 50 /min︱distance table/ram, max. stroke up, adjustment up 600 mm︱table surface area 1000 x 770 mm︱table height over floor 810 mm︱hole in the table 360 mm︱Passage to the back 450 mm︱ram surface 710 x 450 mm︱ram adjustment 110 mm︱power requirement 15,0 kW︱weight 10,5 t︱Dimensions (WxDxH) 1,7 x 2,0 x 3,2 m︱
          year of manufacture 1969 overhaul 1993 permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic clutch, mechanical overload protection in ram, pneumatic counterbalance in ram, two-hand operation can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F
            pressure 160 t
            throat 400 mm
            stroke 30 - 200 mm
            no. of strokes 50 /min
            distance table/ram, max. stroke . 600 mm
            table surface area 1000 x 770 mm
            table height over floor 810 mm
            hole in the table 360 mm
            Passage to the back 450 mm
            ram surface 710 x 450 mm
            ram adjustment 110 mm
            power requirement 15,0 kW
            weight 10,5 t
            Dimensions (WxDxH) 1,7 x 2,0 x 3,2 m
            Description :
            year of manufacture 1969
            overhaul 1993
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with hydraulic clutch, mechanical overload protection in ram, pneumatic counterbalance in ram, two-hand operation
            can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN AP 80

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-959 · Eccentric Press - Single Column

          WEINGARTEN - AP 80 - - 1992 -

          Technical details
          pressure 80 t︱throat 400 mm︱stroke 8 - 112 mm︱no. of strokes 120 Hub/min︱ram adjustment 70 mm︱dayligth 412 mm︱table surface area 850 x 600 mm︱ram surface 640 x 400 mm︱column daylight (hinten) 680 mm︱total power requirement 11 kW︱weight of the machine ca. 6,1 t︱dimensions of the machine ca. B 1,3 x T 1,9 x H 3,2 m︱
          - Motorized ram adjustment - hydraulic overload protection - fixed table Machine is to be partially overhauled in our house: - complete disassembly and review - new paintwork - new control cabinet with PLC and touchscreen including cabling
            pressure 80 t
            throat 400 mm
            stroke 8 - 112 mm
            no. of strokes 120 Hub/min
            ram adjustment 70 mm
            dayligth 412 mm
            table surface area 850 x 600 mm
            ram surface 640 x 400 mm
            column daylight (hinten) 680 mm
            total power requirement 11 kW
            weight of the machine ca. 6,1 t
            dimensions of the machine ca. B 1,3 x T 1,9 x H 3,2 m
            Description :
            - Motorized ram adjustment
            - hydraulic overload protection
            - fixed table

            Machine is to be partially overhauled in our house:
            - complete disassembly and review
            - new paintwork
            - new control cabinet with PLC and touchscreen including cabling


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN ARP 315 Z (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133061 · Eccentric Press - Single Column

          WEINGARTEN - ARP 315 Z (UVV) - - 1990 - Siemens S 5

          Technical details
          pressure 315 t︱throat 480 mm︱stroke 20 - 190 mm︱no. of strokes 36 + 45 /min︱distance table/ram, max. stroke up, adjustment up 615 mm︱table surface area 1400 x 880 mm︱hole in the table 250 mm︱table height over floor 800 mm︱passage to the back 950 mm︱ram surface 850 x 630 mm︱ram adjustment 125 mm︱power requirement 33,0 kW︱weight 30,0 t︱dimensions (WxDxH) 2,0 x 3,0 x 4,4 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with pneumatic hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, two-hand operation can be offered without additional work, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 315 t
            throat 480 mm
            stroke 20 - 190 mm
            no. of strokes 36 + 45 /min
            distance table/ram, max. stroke . 615 mm
            table surface area 1400 x 880 mm
            hole in the table 250 mm
            table height over floor 800 mm
            passage to the back 950 mm
            ram surface 850 x 630 mm
            ram adjustment 125 mm
            power requirement 33,0 kW
            weight 30,0 t
            dimensions (WxDxH) 2,0 x 3,0 x 4,4 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with pneumatic hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, two-hand operation
            can be offered without additional work, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN ARP 160 S (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133041 · Eccentric Press - Single Column

          WEINGARTEN - ARP 160 S (UVV) - - 1989 - Siemens S 5

          Technical details
          pressure 160 t︱throat 480 mm︱stroke fix fix 180 mm︱no. of strokes 25 - 70 /min︱distance table/ram, max. stroke up, adjustment up 650 mm︱table surface area 1100 x 900 mm︱Hole in the table 450 mm︱table height over floor 900 mm︱passage to the back 700 mm︱ram surface 900 x 600 mm︱ram adjustment 144 mm︱power requirement 30,75 kW︱weight 15,3 t︱dimensions (WxDxH) 2,0 x 2,4 x 3,75 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, FIX stroke, pneumatic clutch/brake combination (make Desch), hydraulic overload protection in ram, pneumatic counterbalance in ram, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 160 t
            throat 480 mm
            stroke fix fix 180 mm
            no. of strokes 25 - 70 /min
            distance table/ram, max. stroke . 650 mm
            table surface area 1100 x 900 mm
            Hole in the table 450 mm
            table height over floor 900 mm
            passage to the back 700 mm
            ram surface 900 x 600 mm
            ram adjustment 144 mm
            power requirement 30,75 kW
            weight 15,3 t
            dimensions (WxDxH) 2,0 x 2,4 x 3,75 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with infinitely variable drive, FIX stroke, pneumatic clutch/brake combination (make Desch), hydraulic overload protection in ram, pneumatic counterbalance in ram, two-hand operation
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN ARP 250 (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223021 · Eccentric Press - Single Column

          WEINGARTEN - ARP 250 (UVV) - - 1989 - konventionell

          Technical details
          pressure 250 t︱stroke 20 - 190 mm︱no. of strokes 24 / 48 /min︱throat 500 mm︱passage to the back 1000 mm︱dayligth 615 mm︱table surface area 1400 x 880 mm︱hole in the table 450/500 mm︱table height over floor 800 mm︱table adjustable mm︱ram surface 1380 x 620 mm︱ram adjustment 125 mm︱power requirement 29,0 kW︱Weight 27,0 t︱dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse
            pressure 250 t
            stroke 20 - 190 mm
            no. of strokes 24 / 48 /min
            throat 500 mm
            passage to the back 1000 mm
            dayligth 615 mm
            table surface area 1400 x 880 mm
            hole in the table 450/500 mm
            table height over floor 800 mm
            ram surface 1380 x 620 mm
            ram adjustment 125 mm
            power requirement 29,0 kW
            Weight 27,0 t
            dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation
            can be inspected in running function in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN AP 100 (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233046 · Eccentric Press - Single Column

          WEINGARTEN - AP 100 (UVV) - - 1989 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 180 mm︱no. of strokes 110 /min︱throat 425 mm︱passage to the back 720 mm︱dayligth 570 mm︱table surface area 900 x 700 mm︱hole in the table 250 mm︱table height over floor 800 mm︱ram surface 700 x 450 mm︱ram adjustment 80 mm︱power requirement 13,0 kW︱Weight 8,0 t︱dimensions of the machine ca. 2,2 x 1,6 x 3,2 m x m x m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation
            pressure 100 t
            stroke 20 - 180 mm
            no. of strokes 110 /min
            throat 425 mm
            passage to the back 720 mm
            dayligth 570 mm
            table surface area 900 x 700 mm
            hole in the table 250 mm
            table height over floor 800 mm
            ram surface 700 x 450 mm
            ram adjustment 80 mm
            power requirement 13,0 kW
            Weight 8,0 t
            dimensions of the machine ca. 2,2 x 1,6 x 3,2 m x m x m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN ARP 80 (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-043016 · Eccentric Press - Single Column

          WEINGARTEN - ARP 80 (UVV) - - 1987 - Option: Pilz (neu)

          Technical details
          Pressure 080 t︱throat 380 mm︱stroke 8 - 112 mm︱no. of strokes 60 /min︱distance table/ram, max. stroke up, adjustment up 472 mm︱table surface area 840 x 610 mm︱table height over floor 800 mm︱passage to the back 520 mm︱ram surface 650 x 400 mm︱ram adjustment 70 mm︱power capacity 7,5 kW︱weight 6,9 t︱Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m︱
          permitted for manual loading according to the German Safety Regulations (UVV) with pneumatic clutch/brake combination, mechanical overlaod protection in ram, pneumatic counterbalance in ram can be offered without putting into operation (no electrical cabinet) or alternatively with new control
            Pressure 080 t
            throat 380 mm
            stroke 8 - 112 mm
            no. of strokes 60 /min
            distance table/ram, max. stroke . 472 mm
            table surface area 840 x 610 mm
            table height over floor 800 mm
            passage to the back 520 mm
            ram surface 650 x 400 mm
            ram adjustment 70 mm
            power capacity 7,5 kW
            weight 6,9 t
            Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with pneumatic clutch/brake combination, mechanical overlaod protection in ram, pneumatic counterbalance in ram
            can be offered without putting into operation (no electrical cabinet) or alternatively with new control


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN ARP 80 (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183002V · Eccentric Press - Single Column

          WEINGARTEN - ARP 80 (UVV) - - 1985 - konventionell

          Technical details
          Pressure 080 t︱throat 345 mm︱stroke 20 - 160 mm︱no. of strokes 65 /min︱distance table/ram, max. stroke up, adjustment up 495 mm︱table surface area 920 x 610 mm︱table height over floor 800 mm︱Hole in the table 280 mm︱passage to the back 670 mm︱ram surface 650 x 400 mm︱ram adjustment 50 mm︱power capacity 10,0 kW︱weight 7,7 t︱Dimensions (WxDxH) 1,5 x 2,2 x 3,15 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with pneumatic clutch, hydraulic protection in ram, motoric ram adjustment, two-hand operation
            Pressure 080 t
            throat 345 mm
            stroke 20 - 160 mm
            no. of strokes 65 /min
            distance table/ram, max. stroke . 495 mm
            table surface area 920 x 610 mm
            table height over floor 800 mm
            Hole in the table 280 mm
            passage to the back 670 mm
            ram surface 650 x 400 mm
            ram adjustment 50 mm
            power capacity 10,0 kW
            weight 7,7 t
            Dimensions (WxDxH) 1,5 x 2,2 x 3,15 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with pneumatic clutch, hydraulic protection in ram, motoric ram adjustment, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column SCHULER C 80 / 345 (UVV)

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193079V · Eccentric Press - Single Column

          SCHULER - C 80 / 345 (UVV) - - 1984 - konventionell

          Technical details
          pressure 080 t︱throat 345 mm︱stroke 50 - 120 mm︱Stroke rate 30 - 120 / min︱Distance table/ram, max. stroke up, adjustment up 490 mm︱Table surface area 875 x 695 mm︱Hole in the table 280 / 315 mm︱Table height above floor 810 mm︱Passage to the back 450 mm︱Ram surface 630 x 400 mm︱Ram adjustment 71 mm︱Power capacity 16,0 kW︱Weight 6,8 t︱Dimensions (WxDxH) 1,6 x 1,65 x 3,3 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic clutch-/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Pilz
            pressure 080 t
            throat 345 mm
            stroke 50 - 120 mm
            Stroke rate 30 - 120 / min
            Distance table/ram, max. stroke . 490 mm
            Table surface area 875 x 695 mm
            Hole in the table 280 / 315 mm
            Table height above floor 810 mm
            Passage to the back 450 mm
            Ram surface 630 x 400 mm
            Ram adjustment 71 mm
            Power capacity 16,0 kW
            Weight 6,8 t
            Dimensions (WxDxH) 1,6 x 1,65 x 3,3 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic clutch-/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, two-hand operation
            can be offered with putting into operation in given condition or alternatively with new control Pilz


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN AVP 63

          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland
          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15645 · Eccentric Press - Single Column

          WEINGARTEN - AVP 63 - - 1984 -

          Technical details
          pressure 63 t︱throat 320 mm︱stroke 8-100 mm︱no. of strokes 120 Hub/min︱ram - range of adjustment 63 mm︱table surface area 730x600 mm︱ram surface 540x360 mm︱table height 850 mm︱tool hole in ram Ø40 mm︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. BxTxH 2000x2000x3000 mm︱
            pressure 63 t
            throat 320 mm
            stroke 8-100 mm
            no. of strokes 120 Hub/min
            ram - range of adjustment 63 mm
            table surface area 730x600 mm
            ram surface 540x360 mm
            table height 850 mm
            tool hole in ram Ø40 mm
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. BxTxH 2000x2000x3000 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   
            •

          Find the perfect presses for your needs at LagerMaschinen
          Presses are multi-function tools for home or business

          The umbrella term press encompasses a wide range of different machines with an enormous array of functions. Presses can be used for the shaping, cutting, and punching of a variety of different materials. Whether youre in the market for a small manually-operated press for your home workshop or a massive industrial press for your business, you can easily find the most suitable machine for your specifications quickly and easily using LagerMaschinens online marketplace of used machines.

          Find the right used machines for you at LagerMaschinen

          From the publishing industry to the automotive sector, presses play a crucial role in the forming and finishing of products. Presses can be used to shape heavy material, imprint papers and plastic or cut and form metal, such as in coin production. For control and precision, look for used manually-operated presses. For mass-production, CNC operated presses offer quality and efficiency. No matter what your needs are, you can find used presses and more at LagerMaschinen.

          Investing in used machines is a business-savvy plan

          Buying used machines is a practical solution to the budgetary woes of buying equipment for your home or business. When you invest in used machines you get the quality you demand as a price you can afford. The machine marketplace offered by LagerMaschinen is a user-friendly forum for buying and selling used machines. Presses, lathes, grinders and more can be searched for and filtered by location, price or brand, ensuring a hassle-free shopping process from the comfort of your home or office.

          TOP Manufacturer:

          SICMI - WEINGARTEN - HESSE BY LFSS - MÜLLER - PROFI PRESS - SCHULER - DUNKES - MUELLER - REIS - KAISER -

          Kompendium
          Tworzenie
          Zawartość używanych maszyn
          Prywatności
          LinkedIn
          © 2000-2024, Logotech oHG · Oprogramowanie i usługi internetowe - Wszelkie prawa zastrzeżone