Bitte einen Suchbegriff eingeben - Wprowadź wyszukiwane hasło
Kategoria:
    Producent:
      maszyny:
        Handlowiec:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3 Y3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9114 · CNC Turning- and Milling Center

          MORI SEIKI - NZ 2000 T3 Y3 - - 2011 - MSX 701 IV / MAPPS IV

          Technical details
          turning diameter max. 320 mm︱turning length max. 810 mm︱control MSX 701 IV / MAPPS IV ︱greates pass round over bed 800 mm︱Swing dia. over traverse guideway 800 mm︱distance between spindles 1.130 mm︱standard turning dia. 200 mm︱Main spindle: ︱Number of revolutions max. 5.000 min/-1︱power capacity - main spindel 25 / 22 kW︱max. Torque 358 Nm︱spindle diameter in front bearing 120 mm︱spindle bore 73 mm︱Bar feed max. 65 mm︱C-Axis 0,001 °︱spindle nose JIS A2-6 ︱Subspindel: ︱Number of revolutions max. 5.000 min/-1︱power capacity - Sub spindle 25 / 22 kW︱max. Torque 358 Nm︱
          CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T3 Y3 - Main- and Subspindle - 3 turrets, 2 upper, 1 below - 3 Y-Axis - 3x 16 driven tool stations - extensive accessory package
            turning diameter max. 320 mm
            turning length max. 810 mm
            control MSX 701 IV / MAPPS IV
            greates pass round over bed 800 mm
            Swing dia. over traverse guidewa. 800 mm
            distance between spindles 1.130 mm
            standard turning dia. 200 mm
            Number of revolutions max. 5.000 min/-1
            power capacity - main spindel 25 / 22 kW
            max. Torque 358 Nm
            spindle diameter in front bearin. 120 mm
            spindle bore 73 mm
            Bar feed max. 65 mm
            C-Axis 0,001 °
            spindle nose JIS A2-6
            Number of revolutions max. 5.000 min/-1
            power capacity - Sub spindle 25 / 22 kW
            max. Torque 358 Nm
            Description :
            CNC - Turning- and MillingCenter
            MORI SEIKI - NZ 2000 T3 Y3

            - Main- and Subspindle
            - 3 turrets, 2 upper, 1 below
            - 3 Y-Axis
            - 3x 16 driven tool stations

            - extensive accessory package



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI DURA TURN 310 ECO


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03952 · CNC Turning- and Milling Center

          MORI SEIKI - DURA TURN 310 ECO - - 2010 - MSX 853 MITSUBISHI MIT M

          Technical details
          turning diameter 330 mm︱turning length 400 mm︱control MSX 853 MITSUBISHI MIT M ︱swing dia. 400 / 300 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱Travel x/z 160 / 450 mm︱bar material dia. 51 mm︱spindle drive 13.5 kW︱Spindle RPM 50 - 5000 U/min︱Spindle Torque 143 Nm︱spindle nose JIS A2-5 ︱Turret positions 12 / 6 ︱work piece power 3,7 kW︱RPM of rotary tools 4000 U/min︱tailstock quill taper MT 4 ︱tailstock quill stroke 80 mm︱tailstock quill diameter 75 mm︱Tailstock Travel 450 mm︱coolant ︱total power requirement 25 kW︱
          NICE MACHINE with MSX 853 IV MAPPS - Programming - driven tools - tail stock - coolant equipment CHIP CONVEYOR
            turning diameter 330 mm
            turning length 400 mm
            control MSX 853 MITSUBISHI MIT M
            swing dia. 400 / 300 mm
            rapid power traverse in X-and Z . 18/24 m/min
            Travel x/z 160 / 450 mm
            bar material dia. 51 mm
            spindle drive 13.5 kW
            Spindle RPM 50 - 5000 U/min
            Spindle Torque 143 Nm
            spindle nose JIS A2-5
            Turret positions 12 / 6
            work piece power 3,7 kW
            RPM of rotary tools 4000 U/min
            tailstock quill taper MT 4
            tailstock quill stroke 80 mm
            tailstock quill diameter 75 mm
            Tailstock Travel 450 mm
            total power requirement 25 kW
            Description :
            NICE MACHINE
            with MSX 853 IV MAPPS - Programming
            - driven tools
            - tail stock
            - coolant equipment
            CHIP CONVEYOR


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN PUMA MX 2100 ST


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1538 · CNC Turning- and Milling Center

          DOOSAN - PUMA MX 2100 ST - - 2010 - FANUC 31i-B

          Technical details
          swing over bed 750 mm︱Swing over cross slide 650 mm︱max. turning diameter 540 mm︱Max. Turning length 1.020 mm︱bar material dia. 65 mm︱control FANUC 31i-B ︱Dimensions (L x W x H) 4.850 x 2.525 x 2.805 mm︱weight of the machine 12.000 kg︱
          CNC Turning- and Milling Center | DOOSAN - PUMA MX 2100 ST equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2100ST | MX-2100 ST | MX 2100ST | MX2100 ST
            swing over bed 750 mm
            Swing over cross slide 650 mm
            max. turning diameter 540 mm
            Max. Turning length 1.020 mm
            bar material dia. 65 mm
            control FANUC 31i-B
            Dimensions (L x W x H) 4.850 x 2.525 x 2.805 mm
            weight of the machine 12.000 kg
            Description :
            CNC Turning- and Milling Center | DOOSAN - PUMA MX 2100 ST
            equipped with chip conveyor.


            Additional equipment:

            + counter spindle
            + B axis


            The machine is in good condition.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MX2100ST | MX-2100 ST | MX 2100ST | MX2100 ST


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Integrex E 500H-II x 3000


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2794 · CNC Turning- and Milling Center

          MAZAK - Integrex E 500H-II x 3000 - - 2010 - Mazatrol Matrix

          Technical details
          Control Mazatrol Matrix ︱Turning diameter 820 mm︱Turning length 3048 mm︱Spindle bore diameter 91 mm︱Spindle nose JIS A2-11 ︱Spindle nose sub spindle ︱Turning speed 35 - 3500 1/min︱Turning speed sub spindle 1/min︱Milling head speed 5000 1/min︱Movement X-axis 870 mm︱Movement Y-axis +250 / -250 mm︱Movement Z-axis 3122 mm︱B-Axis travel -30 / +210 °︱C-Axis indexing 360 °︱Tool Taper Capto C8 ︱Tools in tool magazine 120 ︱Length 9500 mm︱Width 3675 mm︱Height 3160 mm︱Weight 26.000 kg︱
            Control Mazatrol Matrix
            Turning diameter 820 mm
            Turning length 3048 mm
            Spindle bore diameter 91 mm
            Spindle nose JIS A2-11
            Turning speed 35 - 3500 1/min
            Milling head speed 5000 1/min
            Movement X-axis 870 mm
            Movement Y-axis +250 / -250 mm
            Movement Z-axis 3122 mm
            B-Axis travel -30 / +210 °
            C-Axis indexing 360 °
            Tool Taper Capto C8
            Tools in tool magazine 120
            Length 9500 mm
            Width 3675 mm
            Height 3160 mm
            Weight 26.000 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 800 Beta V6


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-51910 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 800 Beta V6 - - 2009 - Heidenhain ERGOline

          Technical details
          turning diameter 410 mm︱turning length 800 mm︱greates pass round over bed 700 mm︱control Heidenhain ERGOline ︱spindle passage Ø 65 Teilhohlspannung mm︱spindle speed: 25- 5000 U/min︱spindle motor 25 kW︱max. torque on the spindle 280 Nm︱no. of tools in turret 1 12 VDI 40︱driven stations 12 VDI 40︱speed of driven tools 4000 U/min︱drive milling spindle 5,6/ 11,3 kW︱y-axis +/- 60 mm︱sup spindle 15 kW︱Spindlespeed subspindle 20- 6000 U/min︱rapid traverse 30/22,5/30 m/min︱tail stock Gegenspindle/Subspindle ︱range L-W-H 4,7 x 2,7 x 2,0 mm︱weight of the machine ca. 6,5 t︱
          CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck SMW 315 BH main spindle - 3 jaw chuck SMW 250 BH sub spindle - chipconveyor - oil mist collector LTA - automatic door - coolant pistol - partly hollow spindle Ø 65 x 840 mm
            turning diameter 410 mm
            turning length 800 mm
            greates pass round over bed 700 mm
            control Heidenhain ERGOline
            spindle passage Ø 65 Teilhohlspannung mm
            spindle speed: 25- 5000 U/min
            spindle motor 25 kW
            max. torque on the spindle 280 Nm
            no. of tools in turret 1 12 VDI 40
            driven stations 12 VDI 40
            speed of driven tools 4000 U/min
            drive milling spindle 5,6/ 11,3 kW
            y-axis +/- 60 mm
            sup spindle 15 kW
            Spindlespeed subspindle 20- 6000 U/min
            rapid traverse 30/22,5/30 m/min
            tail stock Gegenspindle/Subspindle
            range L-W-H 4,7 x 2,7 x 2,0 mm
            weight of the machine ca. 6,5 t
            Description :
            CNC lathe with driven tools, Y- axis and sub spindle

            - 3 jaw chuck SMW 315 BH main spindle
            - 3 jaw chuck SMW 250 BH sub spindle
            - chipconveyor
            - oil mist collector LTA
            - automatic door
            - coolant pistol
            - partly hollow spindle Ø 65 x 840 mm


        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG-GILDEMEISTER CTX Gamma 1250 TC


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032986 · CNC Turning- and Milling Center

          DMG-GILDEMEISTER - CTX Gamma 1250 TC - - 2009 - Sinumerik 840D SL

          Technical details
          turning diameter 700 mm︱turning length 1250 mm︱control Sinumerik 840D SL ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Siemens 840D sl control 3-jaw chuck milling spindle (B-axis) Y-axis steady rest 120-fold chain magazine (Capto C6) tail stock chip conveyor coolant device Technische Daten / technical details: max. Umlaufdurchmesser / max. rotary diameter 700 mm max. Drehdurchmesser / max. turning diameter 700 mm max Drehlänge / max. turning length 1250 mm X-Achse / X-axis 800 mm Z-Achse / Z-axis 1300 mm Y-Achse / Y-axis +-210 mm Drehzahl Frässpindel /speed of milling head 12000 UpM / rpm Drehzahlbereich Spindel/ spindle speed 5000 UpM / rpm Schwenkbereich B-Achse/swivel range B-axis +-120 ° Eilgang B-Achse/ rapid feed B-axis 100 m/min Eilgang X,Z,Y / rapid feed X,Z,Y 50,50,50 m/min Antriebsleistung Spindel (40%ED) / drive capacity spindle (40%ED) 32 kW Gewicht der Maschine ca. / weight ca. 18500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 700 mm
            turning length 1250 mm
            control Sinumerik 840D SL
            Description :
            Siemens 840D sl control
            3-jaw chuck
            milling spindle (B-axis)
            Y-axis
            steady rest
            120-fold chain magazine (Capto C6)
            tail stock
            chip conveyor
            coolant device

            Technische Daten / technical details:
            max. Umlaufdurchmesser / max. rotary diameter 700 mm
            max. Drehdurchmesser / max. turning diameter 700 mm
            max Drehlänge / max. turning length 1250 mm
            X-Achse / X-axis 800 mm
            Z-Achse / Z-axis 1300 mm
            Y-Achse / Y-axis +-210 mm
            Drehzahl Frässpindel /speed of milling head 12000 UpM / rpm
            Drehzahlbereich Spindel/ spindle speed 5000 UpM / rpm
            Schwenkbereich B-Achse/swivel range B-axis +-120 °
            Eilgang B-Achse/ rapid feed B-axis 100 m/min
            Eilgang X,Z,Y / rapid feed X,Z,Y 50,50,50 m/min
            Antriebsleistung Spindel (40%ED) / drive capacity spindle (40%ED) 32 kW
            Gewicht der Maschine ca. / weight ca. 18500 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 410 V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9179 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 410 V3 - - 2009 - CNC Pilot 4290 Heidenhain

          Technical details
          turning length 600 mm︱max. turning diameter 320 mm︱swing diameter above cross guideway 365 mm︱control CNC Pilot 4290 Heidenhain︱Main spindle: ︱turning speed range - main spindle max. 5.000 min/-1︱power capacity - main spindel 28 / 21 kW︱max. Torque 320 / 240 Nm︱spindle nose 170h5 ︱chucking diameter 215 mm︱spindle diameter in front bearing 130 mm︱spindle bore 87 mm︱max. bar capacity 65 mm︱c-axis ︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30 ︱Driven Tool Stations: ︱Number of driven toolspositions 12 pos.︱tool spindle speed range max. 4.500 min/-1︱
          CNC Turning- and Milling Center Gildemeister - CTX 410 V3 - driven tool-stations - ca. 7.900h spindle-hrs.
            turning length 600 mm
            max. turning diameter 320 mm
            swing diameter above cross guide. 365 mm
            control CNC Pilot 4290 Heidenhain
            turning speed range - main spind. max. 5.000 min/-1
            power capacity - main spindel 28 / 21 kW
            max. Torque 320 / 240 Nm
            spindle nose 170h5
            chucking diameter 215 mm
            spindle diameter in front bearin. 130 mm
            spindle bore 87 mm
            max. bar capacity 65 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Number of driven toolspositions 12 pos.
            tool spindle speed range max. 4.500 min/-1
            Description :
            CNC Turning- and Milling Center
            Gildemeister - CTX 410 V3

            - driven tool-stations
            - ca. 7.900h spindle-hrs.


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX Beta 800 v 6s


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03779 · CNC Turning- and Milling Center

          DMG MORI - CTX Beta 800 v 6s - - 2008 - Sinumerik 840D sl Siemens

          Technical details
          turning diameter max. 390 mm︱turning length 800 mm︱control Sinumerik 840D sl Siemens︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 4.000 min/-1︱power capacity - main spindel 45 / 35 kW︱max. Torque 700 Nm︱C-Axis 360 °︱spindle nose 220h5 ︱chucking diameter - mm︱max. bar capacity 102 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱power capacity driven tool-stations 14,2 kW︱Spindle speed - driven tool stations 40 - 10.000 min -1︱tool taper VDI 40 DIN69880︱max. Torque 34 Nm︱axis stroke:
          CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 linear V 6 s - Sinumerik Operate und ShopTurn 3G - Spindle ISM 102 - Y-Axis+ c axis - WITH Steady with schip convoyer
            turning diameter max. 390 mm
            turning length 800 mm
            control Sinumerik 840D sl Siemens
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 4.000 min/-1
            power capacity - main spindel 45 / 35 kW
            max. Torque 700 Nm
            C-Axis 360 °
            spindle nose 220h5
            chucking diameter - mm
            max. bar capacity 102 mm
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            power capacity driven tool-stati. 14,2 kW
            Spindle speed - driven tool stat. 40 - 10.000 min -1
            tool taper VDI 40 DIN69880
            max. Torque 34 Nm
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI - CTX beta 800 linear V 6 s

            - Sinumerik Operate und ShopTurn 3G
            - Spindle ISM 102
            - Y-Axis+ c axis
            - WITH Steady
            with schip convoyer





        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TB 67 M


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03751 · CNC Turning- and Milling Center

          CMZ - TB 67 M - - 2008 - Fanuc 32 I MANUEL GUIDE

          Technical details
          turning diameter 385 mm︱turning length 400 mm︱control Fanuc 32 I MANUEL GUIDE ︱spindle bore diameter 73 mm︱number of controlled axis 3 ︱turning speed range 20 - 4.000 U/min︱power requirement 17 kW︱rapid speed 30 m/min︱number of tapers in turret head 12 ︱number of driven tools in turret 12 ︱Spindel speed of driven tools 4000 U/min︱Spindelpower on driven tool 6 kW︱tail stock Ja ︱weight 4 t︱
          CNC-Lathe with driven tools, short magazin barfeeder and partscatcher in very good condition. Equipment: - chipconveyor - 3-jaw-chuck - some toolholders JAPANES - 6 x driven toolholder - partscatcher - Touch setter WITHOUT BAR FEEDER
            turning diameter 385 mm
            turning length 400 mm
            control Fanuc 32 I MANUEL GUIDE
            spindle bore diameter 73 mm
            number of controlled axis 3
            turning speed range 20 - 4.000 U/min
            power requirement 17 kW
            rapid speed 30 m/min
            number of tapers in turret head 12
            number of driven tools in turret 12
            Spindel speed of driven tools 4000 U/min
            Spindelpower on driven tool 6 kW
            tail stock Ja
            weight 4 t
            Description :
            CNC-Lathe with driven tools, short magazin barfeeder and partscatcher in very
            good condition.
            Equipment:
            - chipconveyor
            - 3-jaw-chuck

            - some toolholders JAPANES
            - 6 x driven toolholder
            - partscatcher
            - Touch setter
            WITHOUT BAR FEEDER



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center WFL-MILLTURN M40-G/3000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17881 · CNC Turning- and Milling Center

          WFL-MILLTURN - M40-G/3000 - - 2008 - SIN 840 D Siemens

          Technical details
          turning diameter 520 mm︱turning length 3000 mm︱control SIN 840 D Siemens︱z-axis 3150 mm︱Feed z- axis 1 - 40.000 mm / min︱rapid traverse Z-axis 40,00 m/min︱x-axis 600 mm︱feed x-axis 1 - 30.000 mm/min︱rapid traverse X-axis 30,00 m/min︱Main spindle S1 ︱spindle turning speed range 1 - 3.300 U/min︱power capacity at 100 % load 29,00 kW︱spindle head DIN 55026 - Size A11 ︱spindle diameter in front bearing 160 mm︱spindle bore 115 mm︱C-axis 360 x 0,001 °︱milling spindle S2 ︱tool taper Capto C6 ︱turning speed range - stepless 1 - 6.000 U/min︱y-axis -100 / +150 mm︱
          Main spindle full clamping cylinder on the left, 2-compression clamping, with SMW 3-jaw chuck KNCS-N 315-91 Counter spindle, full clamping cylinder on the right, 2-compression clamping, clamping path monitoring, with SMW 3-jaw chuck KNCS-N 315-91; tailstock function Cross slide below with 2x12-fold disc turret, tool holder Capto C6 hydraulic steady Ø 35 - 245 mm, incl. holder for installation on the left or right tool disc (not swivelling) probe plug gauge various tool holders Capto C6 Coolant paper band filter system DGS 1000L with skimmer air filter system
            turning diameter 520 mm
            turning length 3000 mm
            control SIN 840 D Siemens
            z-axis 3150 mm
            Feed z- axis 1 - 40.000 mm / min
            rapid traverse Z-axis 40,00 m/min
            x-axis 600 mm
            feed x-axis 1 - 30.000 mm/min
            rapid traverse X-axis 30,00 m/min
            Main spindle S1
            spindle turning speed range 1 - 3.300 U/min
            power capacity at 100 % load 29,00 kW
            spindle head DIN 55026 - Size A11
            spindle diameter in front bearin. 160 mm
            spindle bore 115 mm
            C-axis 360 x 0,001 °
            milling spindle S2
            tool taper Capto C6
            turning speed range - stepless 1 - 6.000 U/min
            y-axis -100 / +150 mm
            Description :
            Main spindle full clamping cylinder on the left, 2-compression clamping, with
            SMW 3-jaw chuck
            KNCS-N 315-91
            Counter spindle, full clamping cylinder on the right, 2-compression clamping,
            clamping path monitoring,
            with SMW 3-jaw chuck KNCS-N 315-91; tailstock function
            Cross slide below with 2x12-fold disc turret, tool holder Capto C6
            hydraulic steady Ø 35 - 245 mm, incl. holder for installation on the left or
            right tool disc (not swivelling)
            probe
            plug gauge
            various tool holders Capto C6
            Coolant paper band filter system DGS 1000L with skimmer
            air filter system


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center WFL M120  MILLTURN x  5000


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-0005 · CNC Turning- and Milling Center

          WFL - M120 MILLTURN x 5000 - - 2008 - Siemens 840D pl

          Technical details
          turning diameter 1.140 mm︱turning length 5.000 mm︱control Siemens 840D pl ︱total power requirement 162 kVA︱weight of the machine ca. 56 t︱dimensions of the machine ca. 15,497 x 5,34 x 4,28 m︱
          Multifunctional Turning-Boring-Milling Centre / Brand: WFL Type: M120 MILLTURN x 5000 / Year of construction: 2008 The machine can be inspected by appointment under power. Very well-maintained used, functional condition. TECHNICAL DATA: - CNC Control: Siemens 840D Working area: - Nominal width/turning length: 5.000 mm - Swing diameter over top slide: 1.140 mm - Swing diameter via telescope left/right: 1.160 mm - Swing diameter over setting block slide: 1.150 mm - Height of turning centre over floor: 1.555 mm - Connected load: 145 kW/162 kVA - Machine weight: approx. 56 tons - Main machine dimensions (Length/Width/Height): approx. 15.497* x 5.342 x4.277 mm ACCESSORIES/EQUIPMENT: - Boring bar vibration-damped, brand: Sandvik - Electrostatic suction, brand: UAS - Steady rest, brand: SMW Autoblock - Turning-boring-milling unit - Tool magazine: 90 positions - Electronic hand wheel - Coolant device - Infrared measuring probe, brand: m&h - Chip conveyor (paper belt filter), brand: POLO - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.
            turning diameter 1.140 mm
            turning length 5.000 mm
            control Siemens 840D pl
            total power requirement 162 kVA
            weight of the machine ca. 56 t
            dimensions of the machine ca. 15,497 x 5,34 x 4,28 m
            Description :
            Multifunctional Turning-Boring-Milling Centre / Brand: WFL
            Type: M120 MILLTURN x 5000 / Year of construction: 2008

            The machine can be inspected by appointment under power.

            Very well-maintained used, functional condition.

            TECHNICAL DATA:
            - CNC Control: Siemens 840D

            Working area:
            - Nominal width/turning length: 5.000 mm
            - Swing diameter over top slide: 1.140 mm
            - Swing diameter via telescope left/right: 1.160 mm
            - Swing diameter over setting block slide: 1.150 mm
            - Height of turning centre over floor: 1.555 mm

            - Connected load: 145 kW/162 kVA
            - Machine weight: approx. 56 tons
            - Main machine dimensions (Length/Width/Height):
            approx. 15.497* x 5.342 x4.277 mm

            ACCESSORIES/EQUIPMENT:
            - Boring bar vibration-damped, brand: Sandvik
            - Electrostatic suction, brand: UAS
            - Steady rest, brand: SMW Autoblock
            - Turning-boring-milling unit
            - Tool magazine: 90 positions
            - Electronic hand wheel
            - Coolant device
            - Infrared measuring probe, brand: m&h
            - Chip conveyor (paper belt filter), brand: POLO
            - Documentation
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessories. - Subject to prior sale -

            Detailed technical data sheet and information on equipment available on request.


        • Isabelle Knops
        • Opladener Str. 126
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX C100


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1663 · CNC Turning- and Milling Center

          INDEX - C100 - - 2008 - Siemens - Sinumerik

          Technical details
          --- Main- / Counter- spindle --- - - - - - -︱hollow 42 mm︱spindle diameter in front bearing 75 mm︱- - - - - General data - - - - - - - - - - -︱control Siemens - Sinumerik ︱no. of tools in turret 1 10 Stk./pcs.︱no. of tools in turret 2 10 Stk./pcs.︱no. of tools in turret 3 10 Stk./pcs.︱Tools speed 8.000 U/min︱- - - - - travels - - - - - - - - - - -︱travel -x axis 70 mm︱travel -y axis 70 (+/-35) mm︱travel -z axis 250 mm︱travel -x2 axis 70 mm︱travel -y2 axis 70 (+/-35) mm︱travel -z2 axis 400 mm︱travel -x3 axis 125 mm︱
          CNC Turning- and Milling Center | INDEX - C100 equipped with a turret for driven tools as well as chip conveyors and bar feeder. The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 100 | C-100
            --- Main- / Counter- spindle --- - - - - - -
            hollow 42 mm
            spindle diameter in front bearin. 75 mm
            - - - - - General data - - - - - - - - - - -
            control Siemens - Sinumerik
            no. of tools in turret 1 10 Stk./pcs.
            no. of tools in turret 2 10 Stk./pcs.
            no. of tools in turret 3 10 Stk./pcs.
            Tools speed 8.000 U/min
            - - - - - travels - - - - - - - - - - -
            travel -x axis 70 mm
            travel -y axis 70 (+/-35) mm
            travel -z axis 250 mm
            travel -x2 axis 70 mm
            travel -y2 axis 70 (+/-35) mm
            travel -z2 axis 400 mm
            travel -x3 axis 125 mm
            Description :
            CNC Turning- and Milling Center | INDEX - C100 equipped with a turret for
            driven tools as well as chip conveyors and bar feeder.

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.
            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: C 100 | C-100


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center SPINNER TC 110 SMCY


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9156 · CNC Turning- and Milling Center

          SPINNER - TC 110 SMCY - - 2008 - 840D SolutionLine Siemens

          Technical details
          turning diameter 500 mm︱centre distance 800 mm︱control 840D SolutionLine Siemens︱swing diameter 690 mm︱Main spindle: ︱Max. rpm 3.200 min/-1︱power capacity - main spindel 28/35 kW︱Torque 175/875 Nm︱spindle nose DIN 55026 / A11 ︱max. usable bar diameter 110 mm︱C-Axis 0,001 °︱Subspindle: ︱Max. rpm 4.000 min/-1︱max. Torque 95 / 113 Nm︱spindle nose A6 ︱max. usable bar diameter 52 mm︱C-Axis 0,001 °︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 50 DIN69880︱
          CNC Turning- and Milling Center SPINNER - TC 110 SMCY - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive - Software package "Turning with ShopTurn" - 840D SL option "remaining material detection and processing" "3D simulation of the finished part"
            turning diameter 500 mm
            centre distance 800 mm
            control 840D SolutionLine Siemens
            swing diameter 690 mm
            Max. rpm 3.200 min/-1
            power capacity - main spindel 28/35 kW
            Torque 175/875 Nm
            spindle nose DIN 55026 / A11
            max. usable bar diameter 110 mm
            C-Axis 0,001 °
            Max. rpm 4.000 min/-1
            max. Torque 95 / 113 Nm
            spindle nose A6
            max. usable bar diameter 52 mm
            C-Axis 0,001 °
            number of toolpositions 12 pos.
            tool taper VDI 50 DIN69880
            Description :
            CNC Turning- and Milling Center
            SPINNER - TC 110 SMCY

            - Main- and Subspindle
            - C-Axis
            - Y-Axis
            - Tool-Drive
            - Software package "Turning with ShopTurn"
            - 840D SL option "remaining material detection and processing"
            "3D simulation of the finished part"



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN Puma MX2500 LST


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-100108 · CNC Turning- and Milling Center

          DOOSAN - Puma MX2500 LST - - 2008 - Fanuc 18 iT-B

          Technical details
          turning diameter 750 mm︱turning length 1520 mm︱control Fanuc 18 iT-B ︱total power requirement 22,0 kW︱weight of the machine ca. 15,5 t︱dimensions of the machine ca. m︱
            turning diameter 750 mm
            turning length 1520 mm
            control Fanuc 18 iT-B
            total power requirement 22,0 kW
            weight of the machine ca. 15,5 t


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN Puma MX 2500 LST


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20092 · CNC Turning- and Milling Center

          DOOSAN - Puma MX 2500 LST - - 2008 - FANUC 18i TB

          Technical details
          turning diameter 750 mm︱turning length 1520 mm︱control FANUC 18i TB ︱turning diameter over slide 600 mm︱chucking diameter 250 mm︱spindle nose A2 #8 ︱spindle passage 76 mm︱spindle turning speed - stepless 3500 U/min︱spindle drive 26/22 kW︱milling spindle ︱milling spindle drive 15/11 kW︱milling head speed 10.000 U/min︱x-axis 555 mm︱z-axis 1595 / 1640 mm︱y-axis +/- 80 mm︱b-axis 240 °︱speeds of tool 4000 U/min︱work piece power 5,5 kW︱total power requirement 93,93 kVA︱weight of the machine ca. 15,5 t︱
          - CNC control FANUC Series 18i TB - Milling Head (Capto C6) - lower Tool Revolver 12-fold, driven tools 5,5kW - ATC for 40 tools - main and sub spindle with C-Axis each - Chip Conveyor - Coolant with paperband filter ca 12.000h "Run Time"
            turning diameter 750 mm
            turning length 1520 mm
            control FANUC 18i TB
            turning diameter over slide 600 mm
            chucking diameter 250 mm
            spindle nose A2 #8
            spindle passage 76 mm
            spindle turning speed - stepless 3500 U/min
            spindle drive 26/22 kW
            milling spindle drive 15/11 kW
            milling head speed 10.000 U/min
            x-axis 555 mm
            z-axis 1595 / 1640 mm
            y-axis +/- 80 mm
            b-axis 240 °
            speeds of tool 4000 U/min
            work piece power 5,5 kW
            total power requirement 93,93 kVA
            weight of the machine ca. 15,5 t
            Description :
            - CNC control FANUC Series 18i TB
            - Milling Head (Capto C6)
            - lower Tool Revolver 12-fold, driven tools 5,5kW
            - ATC for 40 tools
            - main and sub spindle with C-Axis each
            - Chip Conveyor
            - Coolant with paperband filter

            ca 12.000h "Run Time"



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CHIRON Mill 2000


          • MWB GmbH & CO. KG
          • Parkstraße 12
          • 09456 Annaberg-Buchholz
          • Deutschland

          • +49 3733 5068501
          • info@mwb-machinetrade.com
            https://www.mwb-machinetrade.com
          #2069-7647 · CNC Turning- and Milling Center

          CHIRON - Mill 2000 - - 2008 -

          Technical details
          x-travel 2000 mm︱y-travel 480 mm︱travel Z-axis, vertical 630 mm︱travel Z-axis, horizontal 715 mm︱workpiece length - max. 1400 mm︱turning speeds 12000 U/min︱tool changer 165 x ︱tool taper HSK-A63 ︱Internal cooling 70 bar︱Measuring probe Renishaw OMP 40 ︱band filter ︱workpiece length 320 mm︱diameter of tools max. 75 mm︱weight of tools max. 4 kg︱spindle bearing diameter 70 mm︱hollow spindle diameter 66 mm︱Number of working hours 51025 h︱total power requirement 63 kW︱weight of the machine ca. 11,60 t︱Chip conveyor
          Control - Siemens Sinumerik 840D Powerline NC swivel head - ± 100° Loading and unloading station for tools Production package with HH pump - PF50 / FKA 900 70 bar HD pump Flush gun for Mill 2000 Rotating viewing window Glass scales for lineal system Ethernet connection Barcode reader
            x-travel 2000 mm
            y-travel 480 mm
            travel Z-axis, vertical 630 mm
            travel Z-axis, horizontal 715 mm
            workpiece length - max. 1400 mm
            turning speeds 12000 U/min
            tool changer 165 x
            tool taper HSK-A63
            Internal cooling 70 bar
            Measuring probe Renishaw OMP 40
            workpiece length 320 mm
            diameter of tools max. 75 mm
            weight of tools max. 4 kg
            spindle bearing diameter 70 mm
            hollow spindle diameter 66 mm
            Number of working hours 51025 h
            total power requirement 63 kW
            weight of the machine ca. 11,60 t
            Description :
            Control - Siemens Sinumerik 840D Powerline
            NC swivel head - ± 100°
            Loading and unloading station for tools
            Production package with HH pump - PF50 / FKA 900
            70 bar HD pump
            Flush gun for Mill 2000
            Rotating viewing window
            Glass scales for lineal system
            Ethernet connection
            Barcode reader


        • MWB GmbH & CO. KG
        • Parkstraße 12
        • 09456 Annaberg-Buchholz
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center SPINNER TC 65 MC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9055 · CNC Turning- and Milling Center

          SPINNER - TC 65 MC - - 2008 - Sinumerik 810 D PL Siemens

          Technical details
          turning diameter 310 mm︱turning length 600 mm︱control Sinumerik 810 D PL Siemens︱turning diameter over bed 425 mm︱Main spindle ︱turning speed range - main spindle 500 - 4.500 min/-1︱max. Torque 280 Nm︱power capacity - main spindel 16,5 kW︱C-Axis 360 °︱Spindle diameter 100 mm︱chucking diameter 210-52 mm︱spindle bearing diameter 120 mm︱clamping cylinder 65 mm︱Bar feed max. 65 / (52) mm︱spindle nose A8 DIN 55026︱axis stroke: ︱x-axis 230 mm︱z-axis 740 mm︱rapid traverse X-axis 15 m/min︱rapid traverse Z-axis 24 m/min︱
          CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld
            turning diameter 310 mm
            turning length 600 mm
            control Sinumerik 810 D PL Siemens
            turning diameter over bed 425 mm
            turning speed range - main spind. 500 - 4.500 min/-1
            max. Torque 280 Nm
            power capacity - main spindel 16,5 kW
            C-Axis 360 °
            Spindle diameter 100 mm
            chucking diameter 210-52 mm
            spindle bearing diameter 120 mm
            clamping cylinder 65 mm
            Bar feed max. 65 / (52) mm
            spindle nose A8 DIN 55026
            x-axis 230 mm
            z-axis 740 mm
            rapid traverse X-axis 15 m/min
            rapid traverse Z-axis 24 m/min
            Description :
            CNC - Turning- and Milling Center
            SPINNER - TC 65 MC

            - Turret completely overhauld


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI NZ 1500 T3Y3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9053 · CNC Turning- and Milling Center

          MORI SEIKI - NZ 1500 T3Y3 - - 2008 - MSX 701 MAPPS III

          Technical details
          turning diameter max. 320 mm︱turning length 810 mm︱control MSX 701 MAPPS III︱standard turning dia. 200 mm︱Main spindle: ︱Number of revolutions max. 6.000 min/-1︱power capacity - main spindel 22 / 18,5 kW︱Bar feed max. 52 mm︱spindle bore 61 mm︱C-Axis 0,001 °︱Subspindel: ︱Number of revolutions max. 6.000 min/-1︱power capacity - Sub spindle 22 / 18,5 kW︱Bar feed max. 52 mm︱spindle bore 61 mm︱C-Axis 0,001 °︱Turret 1 + 3: ︱number of toolpositions je 16 pos.︱Number of driven toolspositions je 16 pos.︱Spindle speed - driven tools max. 6.000 min -1︱
          CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device
            turning diameter max. 320 mm
            turning length 810 mm
            control MSX 701 MAPPS III
            standard turning dia. 200 mm
            Number of revolutions max. 6.000 min/-1
            power capacity - main spindel 22 / 18,5 kW
            Bar feed max. 52 mm
            spindle bore 61 mm
            C-Axis 0,001 °
            Number of revolutions max. 6.000 min/-1
            power capacity - Sub spindle 22 / 18,5 kW
            Bar feed max. 52 mm
            spindle bore 61 mm
            C-Axis 0,001 °
            number of toolpositions je 16 pos.
            Number of driven toolspositions je 16 pos.
            Spindle speed - driven tools max. 6.000 min -1
            Description :
            CNC - Turning- and MillingCenter
            MORI SEIKI - NZ 1500 T3Y3

            - Main- and Subspindle
            - 3 turrets, 2x upper / 1x below
            - 3x Y-Axis
            - 3x 16-pos. tool-drive

            - incl. 28x collets
            - incl. Hainbuch changing device



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center EMCO MaxxTurn 45


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9169 · CNC Turning- and Milling Center

          EMCO - MaxxTurn 45 - - 2008 - Sinumerik 840D Siemens

          Technical details
          turning diameter max. 300 mm︱max. workpiece length 480 mm︱control Sinumerik 840D Siemens︱greates pass round over bed 430 mm︱Swing dia. over traverse guideway 300 mm︱distance between spindles 720 mm︱Main spindle: ︱turning speed range - main spindle 0 - 6.300 min/-1︱power capacity - main spindel 8 / 13 kW︱max. Torque 78 Nm︱spindle head KK5 DIN 55026 ︱spindle diameter in front bearing 80 mm︱bar material dia. max. 45 mm︱C-Axis 0,001 °︱max. chucking diameter 160 mm︱Subspindle: ︱Spindle speed range subspindle 0 - 6.300 min/-1︱power capacity - Sub spindle 7 / 10 kW︱max. Torque 42 Nm︱spindle head KK4 DIN 55026
          CNC - Turning- and MillingCenter EMCO - MaxxTurn 45
            turning diameter max. 300 mm
            max. workpiece length 480 mm
            control Sinumerik 840D Siemens
            greates pass round over bed 430 mm
            Swing dia. over traverse guidewa. 300 mm
            distance between spindles 720 mm
            turning speed range - main spind. 0 - 6.300 min/-1
            power capacity - main spindel 8 / 13 kW
            max. Torque 78 Nm
            spindle head KK5 DIN 55026
            spindle diameter in front bearin. 80 mm
            bar material dia. max. 45 mm
            C-Axis 0,001 °
            max. chucking diameter 160 mm
            Spindle speed range subspindle 0 - 6.300 min/-1
            power capacity - Sub spindle 7 / 10 kW
            max. Torque 42 Nm
            spindle head KK4 DIN 55026
            Description :
            CNC - Turning- and MillingCenter
            EMCO - MaxxTurn 45



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN DAEWOO PUMA 700 LM


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03748 · CNC Turning- and Milling Center

          DOOSAN DAEWOO - PUMA 700 LM - - 2007 - FANUC 21 ITB

          Technical details
          turning diameter 900 mm︱turning length 3100 mm︱control FANUC 21 ITB ︱swing dia. 1030 mm︱standard turning diameter 750 mm︱bar material dia. 90 mm︱Spindle bore 110 mm︱travel -x axis 471 mm︱travel -z axis 3225 mm︱rapid travel - longitudinal/face 15/ 20 m/min︱Spindle RPM 3000 1/min︱spindle drive 45 kW︱turret stations / rotary tool stations 12 / 6 BMT 85︱ 7,5/5,7 kW︱speed of driven tools 3000 1/min︱total power requirement 62,2 kVA︱weight of the machine ca. 22,2 t︱dimensions of the machine ca. 6,1 x 2,2 x 2,2 m︱Chip conveyor JA ︱Parts and total counter
          High precision Turning and Milling Centre WITH C AXIS AND STEADY Easy programming bY FANUC 16 T A total of 12 toolholders come with the machine: 4 LIVE TOOLS INCLUD CHIP CONVOYER
            turning diameter 900 mm
            turning length 3100 mm
            control FANUC 21 ITB
            swing dia. 1030 mm
            standard turning diameter 750 mm
            bar material dia. 90 mm
            Spindle bore 110 mm
            travel -x axis 471 mm
            travel -z axis 3225 mm
            rapid travel - longitudinal/face 15/ 20 m/min
            Spindle RPM 3000 1/min
            spindle drive 45 kW
            turret stations / rotary tool st. 12 / 6 BMT 85
            7,5/5,7 kW
            speed of driven tools 3000 1/min
            total power requirement 62,2 kVA
            weight of the machine ca. 22,2 t
            dimensions of the machine ca. 6,1 x 2,2 x 2,2 m
            Chip conveyor JA
            Description :
            High precision Turning and Milling Centre
            WITH C AXIS AND STEADY
            Easy programming bY FANUC 16 T
            A total of 12 toolholders come with the machine: 4 LIVE TOOLS INCLUD
            CHIP CONVOYER


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TL 20 ms


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03961 · CNC Turning- and Milling Center

          CMZ - TL 20 ms - - 2007 - FANUC 18 IT

          Technical details
          turning diameter 400 mm︱turning length 840 mm︱control FANUC 18 IT ︱bar diameter 66 mm︱travel -x axis 210 mm︱travel -z axis 840 mm︱turning speed range - drive spindle 40-5000 1/min︱spindle nose JIS A2-6 ︱spindle bore 66 mm︱C-Axis 0,001° ︱spindle bearing diameter 110 mm︱turret head 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 18 m/min︱rapid traverse Z-axis 24 m/min︱drive capacity - spindle motor 15/11 kW︱total power requirement 35 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 2,7 x 2,2 x 1,9 m︱
          VERY NICE MACHINE WITH FANUC 18 IT cHIP CONVOYOR HP POMPE C AXIS AND LIVE TOOLS sup spindel
            turning diameter 400 mm
            turning length 840 mm
            control FANUC 18 IT
            bar diameter 66 mm
            travel -x axis 210 mm
            travel -z axis 840 mm
            turning speed range - drive spin. 40-5000 1/min
            spindle nose JIS A2-6
            spindle bore 66 mm
            C-Axis 0,001°
            spindle bearing diameter 110 mm
            turret head 12 Pos.
            tool changing time 0,2 sec
            rapid traverse X-axis 18 m/min
            rapid traverse Z-axis 24 m/min
            drive capacity - spindle motor 15/11 kW
            total power requirement 35 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 2,7 x 2,2 x 1,9 m
            Description :
            VERY NICE MACHINE WITH FANUC 18 IT
            cHIP CONVOYOR
            HP POMPE
            C AXIS AND LIVE TOOLS
            sup spindel



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TL 25 A SM


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03944 · CNC Turning- and Milling Center

          CMZ - TL 25 A SM - - 2007 - FANUC 31 ITB

          Technical details
          turning diameter 510 mm︱turning length 640 mm︱control FANUC 31 ITB ︱bar diameter 66 mm︱travel -x axis 240 mm︱travel -z axis 640 mm︱turning speed range - drive spindle 4000 1/min︱spindle nose JIS A2-6 ︱spindle bore 66 mm︱C-Axis 0,001° ︱spindle bearing diameter 110 mm︱turret head 12 Pos. ︱Driven Tools 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 18 m/min︱rapid traverse Z-axis 24 m/min︱drive capacity - spindle motor 19/14 kW︱power capacity - milling spindle 14/8 kW︱total power requirement 35 kW︱weight of the machine ca. 5.7 t︱
          VERY NICE MACHINE WITH FANUC 32 IT WITH SOME LIVE TOOLS SUP SPINDEL HP POMPE C AXIS AND LIVE TOOLS
            turning diameter 510 mm
            turning length 640 mm
            control FANUC 31 ITB
            bar diameter 66 mm
            travel -x axis 240 mm
            travel -z axis 640 mm
            turning speed range - drive spin. 4000 1/min
            spindle nose JIS A2-6
            spindle bore 66 mm
            C-Axis 0,001°
            spindle bearing diameter 110 mm
            turret head 12 Pos.
            Driven Tools 12 Pos.
            tool changing time 0,2 sec
            rapid traverse X-axis 18 m/min
            rapid traverse Z-axis 24 m/min
            drive capacity - spindle motor 19/14 kW
            power capacity - milling spindle 14/8 kW
            total power requirement 35 kW
            weight of the machine ca. 5.7 t
            Description :
            VERY NICE MACHINE WITH FANUC 32 IT
            WITH SOME LIVE TOOLS
            SUP SPINDEL
            HP POMPE
            C AXIS AND LIVE TOOLS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX G200


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17898 · CNC Turning- and Milling Center

          INDEX - G200 - - 2007 - C200-4D INDEX

          Technical details
          turning diameter 200 mm︱turning length 400 mm︱control C200-4D INDEX︱spindle passage 42 mm︱ 6.000 1/min︱Main spindle 7.000 1/min︱counter-spindle 7.000 1/min︱spindle diameter in front bearing 85 mm︱clamping chuck diameter 140/160 mm︱Turret 1 14 tools VDI 25︱Turret 2 14 tools VDI 25︱total power requirement 38 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 7,1 x 2,35 x 2,2 m︱
          Main (S3) and counter spindle (S4) with tailstock function hydraulic clamping cylinders in the main and counter spindle S3 spindle 42mm/13kW/7000 rpm S4 spindle 42mm/13kW/7000 rpm (electric shaft) S1;S2;S3;S4 as C axis 2 tool breakage sensors Turret 1 (X1;Y;Z1) with 14 stations / driven / VDI25 Turret 2 (X2;Z2) with 14 stations / powered / VDI25 Z4 axis counter spindle Z5 axis portal removal device Index conveyor belt 1 Transmit / Tracyl in CH1/CH2 Hainbuch collet system UNIMAG interface Short bar loader Breuning IRCO RBK 10012 built in 2007 chip conveyor Coolant device
            turning diameter 200 mm
            turning length 400 mm
            control C200-4D INDEX
            spindle passage 42 mm
            6.000 1/min
            Main spindle 7.000 1/min
            counter-spindle 7.000 1/min
            spindle diameter in front bearin. 85 mm
            clamping chuck diameter 140/160 mm
            Turret 1 14 tools VDI 25
            Turret 2 14 tools VDI 25
            total power requirement 38 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 7,1 x 2,35 x 2,2 m
            Description :
            Main (S3) and counter spindle (S4) with tailstock function
            hydraulic clamping cylinders in the main and counter spindle
            S3 spindle 42mm/13kW/7000 rpm
            S4 spindle 42mm/13kW/7000 rpm (electric shaft)
            S1;S2;S3;S4 as C axis
            2 tool breakage sensors
            Turret 1 (X1;Y;Z1) with 14 stations / driven / VDI25
            Turret 2 (X2;Z2) with 14 stations / powered / VDI25
            Z4 axis counter spindle
            Z5 axis portal removal device
            Index conveyor belt 1
            Transmit / Tracyl in CH1/CH2
            Hainbuch collet system
            UNIMAG interface
            Short bar loader Breuning IRCO RBK 10012 built in 2007
            chip conveyor
            Coolant device


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center HAAS SL30-THF


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-5003 · CNC Turning- and Milling Center

          HAAS - SL30-THF - - 2007 - HAAS

          Technical details
          turning diameter 432 mm︱turning length 864 mm︱control HAAS ︱spindle taper: ︱c-axis ︱bar capacity 76 mm︱spindle turning speed - stepless 30-3400 U/min︱Top turret tool hodler: VDI40 ︱weight of the machine ca. 7.3 t︱dimensions of the machine ca. 4.0x2.2x2.0 m︱
            turning diameter 432 mm
            turning length 864 mm
            control HAAS
            bar capacity 76 mm
            spindle turning speed - stepless 30-3400 U/min
            Top turret tool hodler: VDI40
            weight of the machine ca. 7.3 t
            dimensions of the machine ca. 4.0x2.2x2.0 m


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •