CNC-Vertical Turret Lathe - Single Col.

YS-VL-1000 | YS-VL-1200 | ︱faceplate diameter 1000|1250|1600|2000 mm︱swing diameter 1350|1600|2000|2500 mm︱turning height 1070|1350|1350|1700 mm︱max. turning diameter 1150|1350|1800|2300 mm︱table load 4|5|8|10 t︱table rotation speed 2 - 600 | 2 - 300 | 2 - 2 U/min︱max. torque on the faceplate 10000|12500|18500|54000 Nm︱Travel of Ram (vertical) 800 | 900 | 900 | 1000 mm︱Travel of ram (horiz.) 1350 | 1475 | 1650 | 2275 mm︱ram head dimension 230 x 230|250 x 250|250 x mm︱rapid power traverse in X-and Z direction 10/12|10/12|10/12|10/10 m/min︱feeds 0,1 - 50 mm/U︱feed speeds 0 - 1260 mm/min︱Tool changer 12 (C-Achse mit 16) ︱tool taper ︱drive capacity - spindle motor 37/45| 37/45 (60/75 opt.) kW︱Machine height 5330 |5500 |5500|6600 mm︱machine length 4600 |4700 |5050| 4950 mm︱machine width 5500 |5800 |6300|7320 mm︱

---

Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

YS-VL-3000 ︱faceplate diameter 3000 mm︱swing diameter 3500 mm︱turning height 1650 mm︱max. turning diameter 3400 mm︱table load 40 t︱table rotation speed 2-40/41-120 U/min︱max. torque on the faceplate 64500 Nm︱Travel of Ram (vertical) 1000 (1400 opt.) mm︱Travel of ram (horiz.) 2775 mm ︱ram head dimension 280x280 mm︱rapid power traverse in X-and Z direction 10/10 m/min︱feeds 0,1 - 50 mm/U︱feed speeds 0 - 1260 mm/min︱Tool changer 12 (C-Achse mit 16) ︱tool taper SK50/BT50 ︱drive capacity - spindle motor 60/75 (75/100) kW︱Machine height 6700 mm︱machine length 6100 mm︱machine width 8700 mm︱

---

Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

faceplate diameter 2500 mm︱swing diameter 3000 mm︱turning height 1700 mm︱max. turning diameter 2800 mm︱weight of the machine ca. 53 t︱

---

Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

turning diameter 1250 mm︱swing diameter 1160 mm︱turning height 800 mm︱faceplate diameter 1000 mm︱total power requirement 97 kW︱weight of the machine ca. 25000 t︱dimensions of the machine ca. m︱

---

P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 " Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of modern lathes available. Please let us know your requirements

turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 450 mm︱Control Fanuc 31i-Model B ︱c-axis 0,001 Grad︱gripping station 32 mm︱c-axis 0,001 0︱speeds 6000 U/min︱turret (x-stations) 2x16 Stationen︱worktool system 16 Stirnseite︱worktool system 16 Quer-Rückseite︱worktool system 5 Drehmeißel/Turn︱total power requirement 3,7/5,5 kW︱weight of the machine ca. 4,6 t︱dimensions of the machine ca. 2,6 x 2 x 1,9 m︱bar loader FMB 3-36/3200 ︱driven tools 24 16+8︱

---

CNC Swiss type lathe Maier ML 32-F2, year 2019 with loading magazine FMB 3-36 Very good condition, few working hours # Vib Turn chip breaking software # FMB 3-36 is equipped with two channels 22 and 32mm. # Pick-up spindle is equipped with Forkardt chuck. Max. overlap diameter 9mm # Extended headstock stroke Z1 axis 450mm (main spindle) # Extended headstock stroke Z2-axis 340mm (pick-up spindle) # High pressure pump 140bar with paper belt filter # Pneumatic guide bush unit up to 33mm with 3 switching positions (open, closed and guiding without grippers) # Discharge of long parts # Operating hours: Control On 9781 h / In progress 6095 h # Hyfra oil cooler, model Alpha 5 New price € 443,530

---

Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high performance CNC control series 31i-B5, 3-channel-control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Y2/YA2/C2/X3/Z3/Y3), rapid traverse speed 30 mm/min, bar diameter max. 38 mm, turning length max. 350 mm, main spindle, speed max. 7,000 rpm, C-axis 0.001 deg, main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 deg, counter spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) LTA fog extraction unit Oil cooler unit coolant application: oil Weight: 6,25 to Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information and subject to prior sale!

turning diameter over bed . mm︱spindle passage 32 mm︱turning length 305 mm︱turning speeds 8000 U/min︱Drive 10,7 / 6,7 kW︱control Traub System TX 8i-s ︱c-axis 0,001° ︱rapid traverse 20 m/min︱turret (x-stations) 1x 10 / 1x 9 ︱total power requirement 35 kVA︱weight of the machine ca. 7 t︱dimensions of the machine ca. 3,8 x 1,7 x 2,5 m︱

---

- Control system TX 8i-s - Oil cooling - Kraft & Bauer fire extinguishing system - Two turrets (all tools powered) - B-axis (upper turret) - Rear processing (stationary tools) - 1 x counter spindle - Picking pliers for finished parts - Belt conveyor for finished parts - High pressure pump - Hinged belt conveyor - Paper band filter - FMB Turbo 3-36 bar feeder - Including all existing processing units and accessories Running time according to the control 19,616 hours Running time according to the control 11,630 hours automatic Manual counter running time 17,972 hours

bar material dia. 32/36 mm︱spindle passage 42 mm︱turning length 220/100 mm︱turning speeds 8000 U/min︱gripping station 32/36 mm︱turning speeds 8000 U/min︱number of tools 38 ︱number of milling stations 27 ︱control Fanuc 31i-B5 ︱Number of axles 9+2x C-Achse St.︱chip conveyor Knoll ︱Number of working hours 22981 h︱high-pressure pump 340 bar︱total power requirement 10 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. 3 x 1,65 x 2,44 + Irco m︱bar loader Breuning Irco 3,2m Stange︱fire distinguisher ja/yes KRAFT & bAUER︱parts conveyor ja/yes ︱tool breakage detector ja/yes ︱

---

CNC sliding headstock lathe Tornos SwissDECO 36 G, year 2018, installation 2019, with multi-channel loading magazine Breuning-Irco, year 2019 Tornos SwissDECO 36G can work with guide bush 32mm (sliding headstock lathe) or without guide bush 36mm (short lathe). Machine ON/OFF: 22,981 h (as of 19/02/2024) Working hours: 10,575h Accessories: mult channel barloader Breuning-Irco ecoPROFI 42.6 equiped with 6 channels: 11, 16, 22, 27, 34, 40mm Knoll conveyor and filter system TISIS i4.0 software

spindle passage 25,4 mm︱turning length 195 mm︱Number of working hours 12000 h︱c-axis 2 0︱Drive tool 8 ︱number of spindle speeds 10000 U/min/rpm︱Control Fanuc 31-B ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

-Linear axes:5 -Loader: Tornos SBF 326 -Belt filter system Knoll -Knoll high pressure system -Chip conveyor Knoll

spindle passage 25,4 mm︱turning length 195 mm︱Number of working hours 13000 h︱c-axis 2 0︱Drive tool 8 ︱number of spindle speeds 10000 U/min/rpm︱Control Fanuc 31-B ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

-Linear axes:5 -Loader: Tornos SBF 326 -Belt filter system Knoll -Knoll high pressure system -Chip conveyor Knoll

turning diameter over bed . mm︱spindle passage 13 mm︱turning length 180 mm︱turning speeds 15000 U/min︱c-axis 2 x 0,001 °︱spindle motor 4 / 5 kW︱gripping station 13 mm︱number of tools max 21 ︱control Fanuc 31i-B ︱Number of axles 5+2x C-Achse St.︱workpiece length - max. 180 mm︱Subspindle - speed 15000 U/min︱Subspindle Power 4 / 5 kW︱total power requirement ca 11 kW︱weight of the machine ca. 2,3 kg︱dimensions of the machine ca. 2,1 x 0,9 x 1,7 m︱

---

CNC sliding headstock automatic lathe - Fanuc 31i-B control - Oil cooling - Kraft & Bauer fire extinguishing system - All axes fully CNC - 3 x driven tools - 1 x counter spindle - 4 x driven tools for back machining - Chute for finished parts - 60 bar high pressure pump - Hinged belt conveyor - Tornos Robostar SBF 213 bar feeder Including all existing machining units and accessories Running time 15,476 hours

bar material dia. 16 mm︱spindle passage 20 mm︱turning length 135 mm︱turning speeds 100-8.000 U/min︱positive location each 1 Grad︱gripping station 16 mm︱turning length 80 mm︱turning speeds 100-6000 U/min︱number of tools 15 ︱number of milling stations 3 ︱control Fanuc Oi-TD ︱Number of axles 4 St.︱Number of working hours 5000 h︱total power requirement 2,7 kW︱weight of the machine ca. 1150 kg︱dimensions of the machine ca. 1,6 x 0,8 x 1,6 + FMB m︱bar loader FMB Minimag 20 16mm Kanal︱

---

swiss type machine Citizen B16 E,built 2015 with FMB Minimag,in good conditions

Control: Manufacture Fanuc 31i-B ︱max. turning diameter 32 mm︱max. workpiece length 270 mm︱weight of the machine ca. 3.6 t︱dimensions of the machine ca. 4 x 1.5 x 2 m︱

---

turning diameter over bed 20 mm︱spindle passage 24 mm︱turning length 180 mm︱turning diameter 20 mm︱control Traub System TX 8i-s ︱turning speeds 10000 U/min︱c-axis 0,001° ︱c-axis 0,001 °︱gripping station 20 mm︱speeds 12000 U/min︱rapid traverse 15 m/min︱turret (x-stations) 2 x 8 ︱high-pressure pump 130 bar︱Number of working hours 30059 h (Bj. 2012)︱spindle hours 22246 h (Bj. 2012)︱total power requirement 2,2/3,7 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 2,5 x 1,5 x 2,25 m︱high-pressure pump ja/yes Grundfoss︱fire distinguisher ja/yes Kraft & Bauer︱

---

CNC long lathe Traub TNL 18, year of construction 2011 and 2012, without loading magazine can be used as long lathe and short lathe 2 pieces immediately available, from medical technology super condition, very well equipped Machining with cutting oil WinFlex licence per machine for programming on PC workstation Sale due to type adjustment. There is a package price for the purchase of two identical machines. TNL 18, year of construction 2011: Operating hours ON/OFF 35.133h Production hours 24.384h TNL 18, year of construction 2012: Operating hours ON/OFF 30,0059h Production hours 20,498h 7+2x C-axes, main and counter spindle, 2 turrets UPPER TURRET - Positions 8 - Number of motorised positions : 8, Driven tools Speed : 12.000 [rpm] - Driven tools power : 2 [kW] - travel X/Z : 120/250 [mm] - travel Y : -40/+25 [mm] LOWER TURRET positions 8 - number of motorised positions : 8, driven tools speed : 12.000 [rpm] - driven tools Power : 2.5 [kW] - X/Z stroke : 120 / 250 [mm] - Y travel : -20 / +40 [mm]

---

Centre de tournage/fraisage CNC d'occasion de type Swiss avec axe B heures de fonctionnement : 7200 commande : Fanuc 31i-A longueur d'usinage : max. 250 mm Nombre d'axes contrôlés : 7 axes et max. 5 axes simultanés Axe B : 0°-130° librement programmable Capacité des barres : Ø 3 mm jusqu'à max. Ø 20 mm puissance d'entraînement de la broche principale : 3,7 kW puissance d'entraînement contre-broche : 2,2 kW vitesse de la broche principale : 10.000 tr/min vitesse de la contre-broche : 10.000 tr/min Axe C : broche principale et contre-broche nombre de supports linéaires : 2 pièces Nombre total d'outils : 35 pièces Dimensions (LxLxH) en mm : 2.110x1.200x1.885 Poids : 3.300 kg Conversion de tournage long en tournage court Stations de perçage de trous profonds Broche à grande vitesse NAKANISHI Chariot arrière avec axe Y Perçage transversal arrière Convoyeur de copeaux Système d'extinction d'incendie Ravitailleur FMB Minimag 20, année 2012 La machine peut être inspectée sous tension sur rendez-vous. Sous réserve de modifications et d'erreurs dans les données techniques et les informations et sous réserve de vente préalable !

bar material dia. 32 mm︱spindle passage 38 mm︱turning length 320 mm︱turning speeds 8000 U/min︱c-axis 0,001 ° Grad︱gripping station 32 ︱turning length 150 mm︱turning speeds 8000 U/min︱c-axis 0,001 ° Grad︱number of tools 4+7+6+10 =27︱number of milling stations 4+4 ︱control Mitsubishi M70 ︱Number of axles 5+2x C Achse 7 St.︱chip conveyor ja/yes LNS︱total power requirement 7,5/5,5 kW︱weight of the machine ca. 3300 kg︱dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m︱bar loader FMB Turbo 3-36 ︱parts conveyor ja/yes ︱high pressure pump Cool Blaster ︱

---

swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachmment: all comes with. It is the only one in the production.

turning diameter over bed 20 mm︱spindle passage 24 mm︱turning length 205 mm︱control Traub System TX 8i-p ︱turning speeds 10000 U/min︱c-axis 0,001 °︱gripping station 20 mm︱speeds 10000 U/min︱rapid traverse 15 m/min︱turret (x-stations) 1x 8, 1x 7 ︱total power requirement 24 kVA︱weight of the machine ca. 4 t︱dimensions of the machine ca. 2,5 x 1,5 x 2,25 m︱

---

- TX 8i-p control unit - Oil cooling - Kraft & Bauer fire extinguishing system - Motor spindle max. passage LW 20mm - max. 10,000 rpm - Stroke max. 205 mm (long rotation version) - Stroke max. 80 mm (short turning version) - Two turrets (8 WZ top 10,000 rpm, 7 WH bottom 10,000 rpm) - Rear machining (7 turrets, 3 of which 10,000 rpm) - Counter spindle Ø 20mm max. 12,000 rpm - KSS pump 30 bar - Finished parts are rinsed out - Belt conveyor for finished parts - Hinged belt conveyor - Paper belt filter - FMB Turbo 3-36 bar feeder - Including all existing processing units and accessories Running time according to control system 53,636 hours On Running time according to control unit 35,940 hours automatic Running time manual counter 48,808 hours

turning diameter over bed mm︱spindle passage mm︱turning length mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

Tornos Gamma 20/6 FANUC 31i-A control with 8 axes, 10.4" color LCD screen 8 axes (X1/Z1/Y1/C1/X2/Y2/Z2/C2), Bar Ø max. 3- 20 mm Max. Workpiece length with fixed guide bush 250mm, Max. Workpiece length with motorized guide bush 210mm, Max. Workpiece length without guide bush 45mm, Main spindle, max. speed 10,000 rpm, C-axis, Drive power of main spindle 1.5/2.2 kW Max. number of tools 39 tools, Max. Max. number of driven tools 15 Cross-section of turning tools 16 x 16 Driven tools max. 8,000 rpm Counter spindle, max. speed 12,000 rpm, C-axis, additional coolant pump (booster pumps) with increased delivery capacity approx. 30 bar / 6 valves / two filters Kraft and Bauer CO2 fire protection system Fire extinguishing system Parts conveyor belt Chip conveyor from Mayfran manual Loading magazine FMB minimag 20/3200 "A" year 2011 With sliding unit for conversion from short to long turning function Ø 2mm - 23mm Coolant used in the machine: oil Machine dimensions: approx. 2100 x 1200 x 1900 [mm] Machine weight: approx. 3300 [kg] Loading magazine dimensions: approx. 5015 x 557 x 1800 [mm] Weight of loading magazine: approx. 700 [kg] Subject to changes and errors in the technical data and information as well as prior sale!

turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 450 mm︱spindle stroke 450 mm︱main spindle speeds: 8000 U/min︱spindle drive 5,5/3,7 kW︱Sub - spindle - bar diameter 26 mm︱turning speed range sub spindle 8000 U/min︱motor power 5,5/3,7 kW︱collets 145E ︱total power requirement 16 kVA︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2,4 x 1,6 x 2,3 m︱

---

MAIER swiss lathe in very good condition with control FANUC 31iTB equipped with: - System 1 - 8 driven tool stations (tool turret crosswise) - System 2 - 8 driven tool stations (tool turret back-transverse) - System 3 - 16 tool stations all driven - System 4 - 8 driven tool stations (transverse tool turret) - counter spindle - Tool breakage control (WPM) - C-axis on main and counter spindle - extended Z1 axis travel 450 mm instead of 220 mm - Y2 - axis for backworking (system 4) - hydraulic clamping incl. hydraulic - aggregate - parts conveyor belt for removal of finished parts - discharge table for discharge of long parts - discharge of long parts (flange + tube) - adapter flange + tube for unloading long parts through the spindle - bar loading magazine make FMB Turbo 3-36 bar length 4,2 m - KNOLL high pressure coolant system 140 / 50 bar with paper belt filter system - Fire protection system make KRAFT & BAUER - tool holder - package - electronic handwheel - chip conveyor The machine can be inspected under power!

Axis 7 ︱control Fanuc ︱main spindle: ︱turning diameter 60 mm︱spindle tunring speed 5000 U/min︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1: ︱

---

In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar feeder interface - chip conveyor *** Changes and errors in the technical data and information, as well Subject to prior sale! ***

turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 125 mm︱Control YASKAWA SIEMENS 840 DI V2 ︱clamping diameter 32 mm︱spindle turning speed range 7000 U/min︱workpiece length - max. 150 mm︱feed 0 - 2000 mm/min︱total power requirement kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 10,5 x 2 x 1,9 m︱

---

The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available << The bar feeder automatically fills the bars to the bar magazine. The bar magazine is an FMB turbo 3-36. The machine has 11 axes: X1, X2, X3 Y1, Y2, Y3 Z1, Z2, Z3 C1, C2

---

Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high performance CNC control series 31i-B5, 3-channel-control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Y2/YA2/C2/X3/Z3/Y3), rapid traverse speed 30 mm/min, bar diameter max. 38 mm, turning length max. 350 mm, main spindle, speed max. 7,000 rpm, C-axis 0.001 deg, main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 deg, counter spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) LTA fog extraction unit Oil cooler unit coolant application: oil Weight: 6,25 to Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information and subject to prior sale!

turning diameter over bed - mm︱spindle passage - mm︱turning length - mm︱Control Fanuc ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 125 mm︱Control YASKAWA SIEMENS 840 DI V2 ︱spindle turning speed range 7000 U/min︱workpiece length - max. 150 mm︱clamping diameter 32 mm︱feed 0 - 2000 mm/min︱total power requirement kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 10,5 x 2 x 1,9 m︱

---

The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available << The bar feeder automatically fills the bars to the bar magazine. The bar magazine is an FMB turbo 3-36. The machine has 11 axes: X1, X2, X3 Y1, Y2, Y3 Z1, Z2, Z3 C1, C2