Bitte einen Suchbegriff eingeben - Wprowadź wyszukiwane hasło
Kategoria:
    Producent:
      maszyny:
        Handlowiec:

          CNC Lathe

          Machinelist: CNC Lathe


          CNC Lathe

          used Lathes CNC Lathe DMG GILDEMEISTER MSL 60/7


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202274 · CNC Lathe

          DMG GILDEMEISTER - MSL 60/7 - - 2015 - Fanuc 31 i

          Technical details
          Axis: 7 ︱Control Fanuc 31 i ︱main spindle: ︱max. rod diameter 60 mm︱max. turning speeds 5000 min/-1︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1:
          In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar loader, usable length 5m *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            Axis: 7
            Control Fanuc 31 i
            max. rod diameter 60 mm
            max. turning speeds 5000 min/-1
            spindle motor 7,5/5,5 kW
            max. turning diameter 42 mm
            max. turning speeds 5000 min/-1
            spindle motor 3,7/2,2 kW
            max speed (Z4) 15 m/min
            max. acceleration 5 m/s2
            travel X1 / X2 / X3 60 mm
            travel X4 130 mm
            travel Z2 80 mm
            tavel Z3 80 mm
            travel Z4 340 mm
            Nominal thrust X1 / X2 / X3 / X4. 4400 N
            Description :
            In our assessment, the machine is in a very good used condition
            State and can be viewed by appointment.

            - Bar loader, usable length 5m

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe DMG GILDEMEISTER NEF 400


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023250 · CNC Lathe

          DMG GILDEMEISTER - NEF 400 - - 2010 - Siemens 840D

          Technical details
          turning diameter 350 mm︱turning length 650 mm︱control Siemens 840D ︱turning diameter over bed 385 mm︱main spindle: ︱turning speed range - main spindle 0 - 4.000 min/-1︱max. torque 340 Nm︱tool turret: ︱number of tool places 12 Pos.︱tool adaptor VDI 30 ︱travel: ︱x-axis 255 mm︱z-axis 800 mm︱total power requirement 21 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 5 x 2,5 x 2 m︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. Technical features: - Operating hours: approx. 23,000 hours - Spindle hours: approx. 10,000h ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 350 mm
            turning length 650 mm
            control Siemens 840D
            turning diameter over bed 385 mm
            turning speed range - main spind. 0 - 4.000 min/-1
            max. torque 340 Nm
            number of tool places 12 Pos.
            tool adaptor VDI 30
            x-axis 255 mm
            z-axis 800 mm
            total power requirement 21 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 5 x 2,5 x 2 m
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            Technical features:
            - Operating hours: approx. 23,000 hours
            - Spindle hours: approx. 10,000h

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe DOOSAN G 220


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024037 · CNC Lathe

          DOOSAN - G 220 - - 2001 - Fanuc Series 21-T

          Technical details
          turning diameter 350 mm︱turning length 280 mm︱control Fanuc Series 21-T ︱x-travel 400 mm︱z-travel 280 mm︱turning speeds 60 - 6.000 U/min︱bar material dia. 40 mm︱table surface area 220 x 700 mm︱total power requirement 18 kW︱weight of the machine ca. 2,35 t︱
            turning diameter 350 mm
            turning length 280 mm
            control Fanuc Series 21-T
            x-travel 400 mm
            z-travel 280 mm
            turning speeds 60 - 6.000 U/min
            bar material dia. 40 mm
            table surface area 220 x 700 mm
            total power requirement 18 kW
            weight of the machine ca. 2,35 t


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe NILES-SIMMONS N20/1000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024017 · CNC Lathe

          NILES-SIMMONS - N20/1000 - - 2000 - Rexroth Indramat BVT 20

          Technical details
          swing diameter 650 mm︱turning length 1000 mm︱control Rexroth Indramat BVT 20 ︱x-travel -15 / 660 mm︱y-travel -150 / 200 mm︱main spindle: 150 ︱spindle bore 92 mm︱bearing diameter 150 mm︱turning speed range - main spindle 0 - 3.800 min/-1︱tool turret: ︱number of tool places 12 Pos.︱total power requirement 70 kW︱
          In our opinion, the machine is in very good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            swing diameter 650 mm
            turning length 1000 mm
            control Rexroth Indramat BVT 20
            x-travel -15 / 660 mm
            y-travel -150 / 200 mm
            main spindle: 150
            spindle bore 92 mm
            bearing diameter 150 mm
            turning speed range - main spind. 0 - 3.800 min/-1
            number of tool places 12 Pos.
            total power requirement 70 kW
            Description :
            In our opinion, the machine is in very good used condition and can be inspected
            under power by appointment.

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***




        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe OKUMA LT 15 M


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202217 · CNC Lathe

          OKUMA - LT 15 M - - 1998 - Okuma OSP 7000 L

          Technical details
          turning diameter 550 mm︱turning length 900 mm︱control Okuma OSP 7000 L ︱turning diameter over bed 550 mm︱turning diameter over cross slideways 150 mm︱centre distance max. 1174 mm︱main spindle: ︱turning speed range - main spindle 45-4500 min/-1︱drive capacity - main spindle 15 kW︱tool turret: ︱number of tool places 2x12 Pos.︱Drill shank diameter 40 mm︱travel: ︱x-axis 230 mm︱z-axis 900 mm︱feeds: ︱rapid traverse 20x24 m/min︱weight of the machine ca. 8,2 t︱
          In our estimation, the machine is in very good condition and can be viewed live by appointment. Technical features: - Double spindle lathe - Traverse paths: x1: 230mm : z1 460mm : x2 230mm : z2 900mm - driven tools Accesories: - chip conveyor *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 550 mm
            turning length 900 mm
            control Okuma OSP 7000 L
            turning diameter over bed 550 mm
            turning diameter over cross slid. 150 mm
            centre distance max. 1174 mm
            turning speed range - main spind. 45-4500 min/-1
            drive capacity - main spindle 15 kW
            number of tool places 2x12 Pos.
            Drill shank diameter 40 mm
            x-axis 230 mm
            z-axis 900 mm
            rapid traverse 20x24 m/min
            weight of the machine ca. 8,2 t
            Description :
            In our estimation, the machine is in very good condition
            and can be viewed live by appointment.

            Technical features:

            - Double spindle lathe
            - Traverse paths: x1: 230mm : z1 460mm : x2 230mm : z2 900mm
            - driven tools

            Accesories:

            - chip conveyor

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe INDEX ABC


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023068 · CNC Lathe

          INDEX - ABC - - 1995 - Siemens Sinumerik

          Technical details
          turning diameter 52 mm︱turning length 280 mm︱control Siemens Sinumerik ︱travel: ︱travel -x axis 90 mm︱travel -z axis 280 mm︱spindle tunring speed 5000 U/min︱ 6000 U/min︱rapid traverse 24 m/min︱total power requirement 18 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 2,7 x 1,35 x 1,9 m︱
          In our opinion, the machine is in good condition and can be inspected under power by appointment. Accesories: -Chip conveyor -Bar feeder ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 52 mm
            turning length 280 mm
            control Siemens Sinumerik
            travel -x axis 90 mm
            travel -z axis 280 mm
            spindle tunring speed 5000 U/min
            6000 U/min
            rapid traverse 24 m/min
            total power requirement 18 kW
            weight of the machine ca. 2,6 t
            dimensions of the machine ca. 2,7 x 1,35 x 1,9 m
            Description :
            In our opinion, the machine is in good condition and can be inspected under
            power by appointment.

            Accesories:
            -Chip conveyor
            -Bar feeder

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***




        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          CNC Lathes provide accuracy for the most important projects.
          CNC Lathes guarantee complete accuracy and uniform results.

          When mass-producing a tool part or complete product absolute accuracy is key. With Computer Numerical Control - CNC - accuracy is now guaranteed and no longer dependent on human control. CNC lathes have replaced conventional lathes in the last few years particularly regarding products where measurements must be absolutely uniform as a matter of safety. Exact specifications and measurements are loaded into the machine as a data file and after a trial run pieces are cut with complete precision while under the supervision of a CNC lathe operator. In this way CNC lathes are guaranteed to last for many years as the heavy physical strain put on normal lathe machines is not the case here. CNC lathes can be extremely expensive when bought new but now with LagerMaschinen you can still outfit your business with a CNC lathe without overstepping your company budget.

          Purchase a used CNC lathe with LagerMaschinen

          LagerMaschinen has developed several features in the last few years designed to optimize your purchasing experience. Its online platform cross-references used machines based on location specifications and price. Communicate with current owners and experts in your field to find the best used CNC lathes for your business needs. Additionally LagerMaschinen's delivery and installation services will save you time money and frustration. LagerMaschinen prides itself on providing a practical and affordable business solution for businesses that need to find reliable used machinery. Find the perfect used CNC lathes today with LagerMaschinen.