Bitte einen Suchbegriff eingeben - Wprowadź wyszukiwane hasło
Kategoria:
    Producent:
      maszyny:
        Handlowiec:

          Cutting

          Machinelist: Cutting


          Cutting machines

          used Cutting Cutting machines PEDDINGHAUS 21501 -310


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06586 · Cutting machines

          PEDDINGHAUS - 21501 -310 - - unbk. -

          Technical details
          volt 380 V︱weight 1,4 t︱
            volt 380 V
            weight 1,4 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MAX MÜLLER Umbau Steuerung SR 200


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H221101 · Cutting machines

          MAX MÜLLER - Umbau Steuerung SR 200 - - NEU -

          Technical details
          cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱
            cross-section width: -- mm
            cross-section heigth: -- mm
            feed: -- mm
            Description :



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines Pugno Plattenschneidmaschine  C926


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H201101 · Cutting machines

          Pugno - Plattenschneidmaschine C926 - - n.b. -

          Technical details
          cross-section width: 800 mm︱cross-section heigth: 15 mm︱feed: ab ca. 5 mm︱speed of feed: m/min︱cuts max.: Schnitte/m︱
          condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards; - New on-board system machine; - New control cabinet with PLC system Siemens S7-1200; - CE marking; - Instructions for use and maintenance in English or German language
            cross-section width: 800 mm
            cross-section heigth: 15 mm
            feed: ab ca. 5 mm
            Description :
            condition: used, overhauled

            Specification: Panel cutting machine -
            overhauled with CE

            - Section width max.approx.: 800 mm
            - Section height max.: 15 mm, depending on the hardness
            of the rubber sheets
            - Cutting length from approx.: 5 mm (depending on material)
            - cutting force approx.: 10 tons
            - Connected load approx.: 1.8 kW
            - Painting: green
            - Operating voltage: 3 x 400V, 50Hz, N, PE
            - Dimensions approx.: 1,200 x 1,450 x 1,950 mm
            - Safety devices according to current standards;
            - New on-board system machine;
            - New control cabinet with PLC system Siemens S7-1200;
            - CE marking;
            - Instructions for use and maintenance in English or German language



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines COTTA Spalter, Gummiballen


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H211002 · Cutting machines

          COTTA - Spalter, Gummiballen - - n.b. -

          Technical details
          cross-section width: 700 mm︱cross-section heigth: 500 mm︱feed: -- mm︱
          Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking; Option: - Output roller conveyor new
            cross-section width: 700 mm
            cross-section heigth: 500 mm
            feed: -- mm
            Description :
            Condition: used, overhauled

            Specification: splitter for rubber bales - overhauled with CE

            - cross section width max.ca.: 700 mm
            - cross section height max. approx.: 500 mm
            - cutting force approx.: 10 tons
            - AC motor: 4 kW, 400 V, 50 Hz
            - Infeed roller conveyor for product transport
            - Machine stands on a raised pedestal
            - Two-hand safety control for driving the blade movement
            - Safety guard according to current standards
            - New control cabinet
            - New on-board system machine
            - Operating and maintenance manual in English
            - CE marking
            - Paintwork: according to customer requirements
            - Refurbished with 1 year warranty
            - CE marking;

            Option:
            - Output roller conveyor new



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines HANS VON DER HEYDE Mitlaufende Saege MA Move


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H200705 · Cutting machines

          HANS VON DER HEYDE - Mitlaufende Saege MA Move - - 2016/17 -

          Technical details
          cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱
            cross-section width: 100 mm
            cross-section heigth: 50 mm
            feed: 10 - 999.999,9 mm
            speed of feed: 1 - 50 m/min


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines Haeuser Vorrichtungsbau Stanzvorrichtung WABS


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H190701 · Cutting machines

          Haeuser Vorrichtungsbau - Stanzvorrichtung WABS - - 2016 -

          Technical details
          cross-section width: 90 mm︱cross-section heigth: 35 mm︱feed: 1.600 mm︱
            cross-section width: 90 mm
            cross-section heigth: 35 mm
            feed: 1.600 mm


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines HANS VON DER HEYDE Mitlaufende Saege MA Move


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H200704 · Cutting machines

          HANS VON DER HEYDE - Mitlaufende Saege MA Move - - 2015 -

          Technical details
          cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱
            cross-section width: 100 mm
            cross-section heigth: 50 mm
            feed: 10 - 999.999,9 mm
            speed of feed: 1 - 50 m/min


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines BASTON TSQ-P-503-100


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H180601 · Cutting machines

          BASTON - TSQ-P-503-100 - - 2011 -

          Technical details
          cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱speed of feed: 0,4 - 20 m/min︱
            cross-section width: -- mm
            cross-section heigth: -- mm
            feed: -- mm
            speed of feed: 0,4 - 20 m/min


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MAX MÜLLER KME 45


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H230801 · Cutting machines

          MAX MÜLLER - KME 45 - - 2004 -

          Technical details
          cross-section width: 40 (45) mm︱cross-section heigth: 25 mm︱feed: 1 - 999.999,9 mm︱speed of feed: 1 - 60 m/min︱cuts max.: 100 Schnitte/m︱
          Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 1750 mm - Operating instructions available!
            cross-section width: 40 (45) mm
            cross-section heigth: 25 mm
            feed: 1 - 999.999,9 mm
            speed of feed: 1 - 60 m/min
            cuts max.: 100 Schnitte/m
            Description :
            Condition: used,

            Specification: circular knife cutting machine - second-hand
            for cutting rings, discs and profiles

            - diameter max.: 45 mm
            - 3 hoses or strands: 6 - 20 mm
            - 2 hoses or strands: 20 - 30 mm
            - 1 hose or string: 30 - 45 mm
            - cross section width max.: 40 mm
            - cross-section height max.: 25 mm
            - feed speed: 1 - 60 m/min, infinitely variable
            - Cutting capacity max.: 100 cuts/min
            depending on material and cutting length
            - Cutting length: 1 - 999.999,9 mm
            - Step jump: 0.1 mm
            - Feed by servo drive
            - Cutting by servo drive
            - Pulsed feed
            - Connected load approx.: 5 kW
            - Operating voltage: 3 x 400V, 50Hz, PE
            - Weight approx.: 550 kg
            - Dimensions (L/W/H): 1,940 x 890 x 1750 mm
            - Operating instructions available!



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MAX MÜLLER KM 465


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H210801 · Cutting machines

          MAX MÜLLER - KM 465 - - 2000 -

          Technical details
          cross-section width: 5 Schläuche 3-5 mm︱cross-section heigth: 3 - 20 mm︱feed: 1,5 - 50 mm︱
          Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: 5 bar - Operating voltage: 3x 400V, 50Hz, N, PE - Paint finish: RAL 6011 reseda green - Weight approx.: 160 kg
            cross-section width: 5 Schläuche 3-5 mm
            cross-section heigth: 3 - 20 mm
            feed: 1,5 - 50 mm
            Description :
            Condition: used, very good condition
            only approx. 1 year in production

            Specification: circular knife cutting machine
            for slices and rings

            - small cutting machine with high-speed rotating circular knife
            - feed and knife movement, pneumatic
            - Tube or strand diameter min.: 3 mm
            - Tube or strand diameter min.: 20 mm
            - Feed (ring or strand length): 1.5 - 50 mm
            - Output depending on material max.: 60 strokes/min
            - Optionally, the following can be cut
            5 tubes or strands: diameter 3 mm to 5 mm
            4 tubes or strands: diameter 5 mm to 7 mm
            3 hoses or strands: diameter 7 mm to 12 mm
            2 hoses or strands: diameter 12 mm to 15 mm
            1 hose or string: diameter 15 mm to 20 mm
            - Power requirement approx.: 0.37 kW
            - Air supply min.: 5 bar
            - Operating voltage: 3x 400V, 50Hz, N, PE
            - Paint finish: RAL 6011 reseda green
            - Weight approx.: 160 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines METZNER MASCHINENBAU KL-W10/280


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H240101 · Cutting machines

          METZNER MASCHINENBAU - KL-W10/280 - - 1999 -

          Technical details
          cross-section width: Schläuche max. 11 mm︱cross-section heigth: 11 mm︱feed: 0,5 - 100.000 mm︱
          Condition: used, very good condition Specification: universal cutting machine with roller drive for hoses - small cutting machine for hoses - feed unit: roller drive - microcontroller control: 80537 - cutting unit: pneumatic - Type of cut: Blade cut - Industrial blade: for PVC hoses - Max. hose diameter: 11 mm - Maintenance unit: yes - Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length - Cutting force approx.: 500 N at 6 bar - Cutting length: 0.5 - 100,000 mm - Resolution/step change: 0.5 mm - Operating voltage: 230V, 50-60 Hz - Compressed air: 5 - 6 bar - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar - Paint finish: RAL 7035 light grey - No documentation, but electrical diagrams are available!
            cross-section width: Schläuche max. 11 mm
            cross-section heigth: 11 mm
            feed: 0,5 - 100.000 mm
            Description :
            Condition: used, very good condition

            Specification: universal cutting machine with roller drive
            for hoses

            - small cutting machine for hoses
            - feed unit: roller drive
            - microcontroller control: 80537
            - cutting unit: pneumatic
            - Type of cut: Blade cut
            - Industrial blade: for PVC hoses
            - Max. hose diameter: 11 mm
            - Maintenance unit: yes
            - Max. feed speed: 1 - 50 m/min
            - Cutting capacity max.: 450 cuts/min
            depending on the cutting length
            - Cutting force approx.: 500 N at 6 bar
            - Cutting length: 0.5 - 100,000 mm
            - Resolution/step change: 0.5 mm
            - Operating voltage: 230V, 50-60 Hz
            - Compressed air: 5 - 6 bar
            - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar
            - Paint finish: RAL 7035 light grey
            - No documentation, but electrical diagrams are available!



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MEB SM 15/130


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H220801 · Cutting machines

          MEB - SM 15/130 - - 01.2021 -

          Technical details
          speed of feed: 40 m/min︱feed: 1 - 99.999,9 mm︱cuts max.: 200 Schnitte/m︱cross-section width: 120 mm︱cross-section heigth: 15 mm︱
          Condition: used, factory NEW, only approx. 20 hours in operation Specification: Cutting Master 15/130 electro-pneumatic cutting machine - basic machine with cutting unit - cutting unit: punch cut - material W/H: approx. 120 x 15 mm - transport by two drive belts - with a maximum speed of 40 m/min - Contact pressure of the drive belts pneumatically adjustable - Length measurement electronically from 1 - 99,999.9 mm Digital display - Cut pneumatically with adjustable pressure up to 6 bar - Number of pieces selectable from 1 to 99.999 Display digital - Different modes for printer connection and expanding stations, control via external inputs/outputs or RS 232 Connections for material feed and depositing devices - Machine switch-off when the number of pieces is reached or end of cut material - Sensors and pneumatics plugged in - Supply connections: - mains connection 230 V/50 Hz - compressed air 6 bar - Plexiglas cover in the material outlet - Feeding bead 130 mm wide - Contact length approx. 115 mms Including the following options: - Material feed direction: right to left - Adjustable stop, adjustable via spindle with position indicator as limit for the upper belt - Take-off belt, belt length approx. 300 mm, separate drive, 24V DC, 0-45 m/min - Mounting frame made of AL-Ptofiles for mounting the cutting machine machine, take-off belt and protective cover. Other options at extra charge: - Sag control with start/stop operation - Material feed (caterpilla) EP 15/40 R/L
            speed of feed: 40 m/min
            feed: 1 - 99.999,9 mm
            cuts max.: 200 Schnitte/m
            cross-section width: 120 mm
            cross-section heigth: 15 mm
            Description :
            Condition: used, factory NEW,
            only approx. 20 hours in operation

            Specification: Cutting Master 15/130
            electro-pneumatic cutting machine

            - basic machine with cutting unit
            - cutting unit: punch cut
            - material W/H: approx. 120 x 15 mm
            - transport by two drive belts
            - with a maximum speed of 40 m/min
            - Contact pressure of the drive belts pneumatically
            adjustable
            - Length measurement electronically from 1 - 99,999.9 mm
            Digital display
            - Cut pneumatically with adjustable pressure
            up to 6 bar
            - Number of pieces selectable from 1 to 99.999 Display
            digital
            - Different modes for printer connection and
            expanding stations, control via
            external inputs/outputs or RS 232
            Connections for material feed and
            depositing devices
            - Machine switch-off when the number of pieces is reached
            or end of cut material
            - Sensors and pneumatics plugged in
            - Supply connections:
            - mains connection 230 V/50 Hz
            - compressed air 6 bar
            - Plexiglas cover in the material outlet
            - Feeding bead 130 mm wide
            - Contact length approx. 115 mms

            Including the following options:
            - Material feed direction: right to left
            - Adjustable stop, adjustable via spindle
            with position indicator as limit for the upper belt
            - Take-off belt, belt length approx. 300 mm, separate drive,
            24V DC, 0-45 m/min
            - Mounting frame made of AL-Ptofiles for mounting the cutting machine
            machine, take-off belt and protective cover.

            Other options at extra charge:
            - Sag control with start/stop operation
            - Material feed (caterpilla) EP 15/40 R/L



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MEB SM 85


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-N181003 · Cutting machines

          MEB - SM 85 - - -

          Technical details
          cross-section width: 85 mm︱cross-section heigth: 25 - 40 mm︱feed: 1 - 999,999,9 mm︱speed of feed: 60 m/min︱cuts max.: 100 - 120 Schnitte/m︱
            cross-section width: 85 mm
            cross-section heigth: 25 - 40 mm
            feed: 1 - 999,999,9 mm
            speed of feed: 60 m/min
            cuts max.: 100 - 120 Schnitte/m


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Cutting Cutting machines MB Bardowick GmbH Kombi-Schneidanlage CC


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H211001 · Cutting machines

          MB Bardowick GmbH - Kombi-Schneidanlage CC - - -

          Technical details
          cross-section width: 100 mm︱cross-section heigth: 40 mm︱feed: 2 - 999.999,9 mm︱
          Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to *800 N - Drive: *2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg
            cross-section width: 100 mm
            cross-section heigth: 40 mm
            feed: 2 - 999.999,9 mm
            Description :
            Condition: new,

            Specification: Impact knife cutting machine CC-600/40
            for hoses and profiles

            - contact length: 600 mm
            - product diameter: 40 mm
            - belt width: 100 mm
            - Tractive force: 400 N to *800 N
            - Drive: *2 drives upper and lower belt
            - Conveyor belt speed: 100 m/min
            - Drive feed, cutting motor: Servo drives
            - Cutting capacity with blade max.: 4,000 1/min
            - Connected load: 3.5 kW
            - Dimensions L/H/B: 1,900 x 1,650 x 960 mm
            - Weight approx.: 580 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •